[xMad]

xMad

17. März 2018 at 12:30 #34492

Hi,
Use the method to compile for a trl8822
my dmesg is full off (see below)
Is it a debug mode
Sometehing wring in the compiling
Thanks
[ 114.254059] RTW: rtl8822b_c2h_handler_no_io: C2H, ID=255 seq=9 len=44
[ 116.317199] RTW: rtw_set_ps_mode(wlan0) Leave 802.11 power save – WIFI-TRAFFIC_BUSY
[ 116.317216] RTW: rtl8822b_set_FwPwrMode_cmd(wlan0): FW LPS mode = 0, SmartPS=2, HW port id=0
[ 118.397134] RTW: traffic_status_watchdog(wlan0) acqiure wake_lock for 4500 ms(tx:0,rx_unicast:34)
[ 120.484628] RTW: rtw_update_ramask => mac_id:0, networkType:0x44, mask:0x00000000ffffe000
==> rssi_level:2, rate_bitmap:0x0000000000000000, shortGIrate=1
==> bw:1, ignore_bw:0x1
[ 120.484657] RTW: rtl8822b_set_FwMacIdConfig_cmd(wlan0): mac_id=0 raid=0x9 bw=1 mask=0x00000000ffffe000
[ 120.484667] RTW: rtl8822b_set_FwMacIdConfig_cmd, mask=0x00000000ffffe000, mac_id=0x0, raid=0x9, shortGIrate=1, power training=00
[ 122.557073] RTW: traffic_status_watchdog(wlan0) acqiure wake_lock for 4500 ms(tx:0,rx_unicast:2392)
[ 124.637061] RTW: traffic_status_watchdog(wlan0) acqiure wake_lock for 4500 ms(tx:0,rx_unicast:345)
[ 126.717044] RTW: traffic_status_watchdog(wlan0) acqiure wake_lock for 4500 ms(tx:0,rx_unicast:585)
[ 128.797069] RTW: traffic_status_watchdog(wlan0) acqiure wake_lock for 4500 ms(tx:1,rx_unicast:44)