Forum Replies Created
-
Posted in: Allo USB Bundle
-
30. September 2020 at 17:20 #49777
Hey Mario,
thanks for helping me out.
I installed Squeezelite and Squeezebox. But I cannot figure out how to use them.A) Squeezelite will start without any problems. I cannot find any (web) interface, that will allow me to control this. Is there any address like „192.168.0.100/squeezelite“ or such, that I might use?
I hoped there would be a big blue button, as there is with the MPD player. But I don´t see any. What am I missing?B) Squeezebox installs fine, but cannot be started. I get this error message:
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
sudo: no tty present and no askpass program specifiedUnfortunately, I have no idea, what that is about. What settings do I have to change, to get it running?
Thanks,
Thone25. September 2020 at 16:53 #49754Hey again,
this is the result of my tests:It looks like MPD has a problem with your sound card or the ALSA mixer.
Please select the „sysdefault“ driver again and make sure that neither Squeezelite nor Shairport are running in parallel.
=> This did not change the outcomeIf that doesn’t help, please test whether playback via Squeezelite and the Squeezebox Server causes the same problems.
=> I Can´t install jivelite without a license. I have to admit, I am not willing to buy one, before I know it is working fine.In particular, please try to see if internet streams differ from your local music on the hard drive.
=> I installed the spotify plugin and connected my account. How can I control the stream, how do I start streaming?Does the Health Checker show anything special in the Settings/Reboot tab?
=> NO:
Status Checker
Internet: Verbunden
CPU Load: 0.29
SD Card Usage: 18%
Temp CPU: 41.2Maybe your power supply is too weak or the Pi is overloaded for some reason.
=> I thought about the overload myself, but have no idea, what could be the cause for that.
I hoped you guys might know more. Is there anything I should check?The power supply I use, was provided as a package with my PI. How much output should a power supply have?
In the latter case, please burn a new image on the SD card and try again with the standard settings.
=> tried with new image 4 times already, this did not lead to any no change -