[thomascologne premium]

thomascologne premium

15. September 2019 at 19:11 #47087

Does anyone have an idea to set up 2x RP with 2x multisqueeze?
The curious thing is if I have RP2 on multisqueeze (with 2 players) and RP1 with just one audioplayer (without multisqueeze) than it works.
With the above mentioned set up the RP1 get´s the mac dc:a6:32:12:f4:41 and is listed in the LMS.

But soon as I switch back to multi for the RP1 too, the LMS is switching between these both mac address.
I also tried to flash both RP´s new, without success.

[thomascologne premium]

thomascologne premium

10. September 2019 at 0:01 #47053

Thanks for the response. I figured out that the AMP2 seems to be down. I ordered a new one for testing and it worked directly, with the same settings. And after installation there is an LED in green.
My guess, the other one is bad.

But now I have another issue.
The current configuration is as follows:
1x Server on Synology with Logitech Media Server 7.7.6
2x Client RP4 (one with DAC+, the second one with AMP2)

In the LMS I just can choose two players, instead of 4 adjusted players (multisqueeze plugin and 2 player per RP). I think there is something wrong with the MAC-adresses, because host and IP are different.
What can I do to change the MAC adresses??
I tried -m <mac adress> already but not sure which adress I have to type there. I tried several, but couldn´t start the player witt this command.

RP1
hostname: AMP2
IP: 192.168.178.42
MAC from LAN: DC:A6:32:12:F4:41
AMP2 MAC-Adress of player:   b8:26:eb:c1:71:f0
jack MAC-Adress of player:   b8:25:eb:c1:71:f0

RP2
hostname: DAC 
IP: 192.168.178.41
MAC from LAN: DC:A6:32:12:F3:BC
Dac MAC-Adress of player:    b8:26:eb:c1:71:f0
jack  MAC-Adress of player:  b8:25:eb:c1:71:f0

• This reply was modified 5 years, 2 months ago by thomascologne.