[RonaldR premium]

RonaldR premium

8. August 2018 at 18:10 #36880

Thank you, that’s it!

[RonaldR premium]

RonaldR premium

8. August 2018 at 15:01 #36869

Sqeezelite has a volume control widget enabled which is functional. Because Digi+ has no hardware volume control (which makes sense) the only one affecting volume can be software. If I click on the volume control widget, the volume increases / decreases accordingly.
I’m using the webinterface for this.

Hardcopy: https://drive.google.com/file/d/1XjcHsfpHqBUIZpKN5nGhNCjamwu9fUY7/view?usp=sharing

• This reply was modified 6 years, 3 months ago by RonaldR.

[RonaldR premium]

RonaldR premium

8. August 2018 at 13:04 #36862

Hi Heiner,

What do you mean „works without volume control“?

What parameters do I have to set in command line?
Or do I have to set maximum volume in squeezelite to not have any software component alter the stream?

Because then I’ll never know whether some player control will reduce the volume accidentally or by means and therefore will spill accurate transmission of digital sound data to the receiver.

Debug Information:

#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.
 

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC
 

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o default:CARD=sndrpihifiberry -a 80:4:: -o hw:1 -U Digital -v
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d default:CARD=sndrpihifiberry
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
YMPD_PARAMETER=--webport 8081
 

#### SQUEEZELITE -l ####
Output devices:
  null                           - Discard all samples (playback) or generate zero samples (capture)
  equal                         
  plugequal                      - Equalizer for plughw:0,0
  default:CARD=ALSA              - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
  sysdefault:CARD=ALSA           - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
  dmix:CARD=ALSA,DEV=0           - bcm2835 ALSA, bcm2835 ALSA - Direct sample mixing device
  dmix:CARD=ALSA,DEV=1           - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample mixing device
  dsnoop:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Direct sample snooping device
  dsnoop:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample snooping device
  hw:CARD=ALSA,DEV=0             - bcm2835 ALSA, bcm2835 ALSA - Direct hardware device without any conversions
  hw:CARD=ALSA,DEV=1             - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct hardware device without any conversions
  plughw:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Hardware device with all software conversions
  plughw:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Hardware device with all software conversions
  default:CARD=sndrpihifiberry   - snd_rpi_hifiberry_digi,  - Default Audio Device
  sysdefault:CARD=sndrpihifiberry - snd_rpi_hifiberry_digi,  - Default Audio Device
  iec958:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_digi,  - IEC958 (S/PDIF) Digital Audio Output
  dmix:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_digi,  - Direct sample mixing device
  dsnoop:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_digi,  - Direct sample snooping device
  hw:CARD=sndrpihifiberry,DEV=0  - snd_rpi_hifiberry_digi,  - Direct hardware device without any conversions
  plughw:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_digi,  - Hardware device with all software conversions

 

#### SHAIRPORT (SYNC) VERSION ####
3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc
 

#### OUTPUT SOUND DETAILS CARD 0 ####
closed
 

#### OUTPUT SOUND DETAILS CARD 1 ####
access: MMAP_INTERLEAVED
format: S24_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 882
buffer_size: 3528
 

[RonaldR premium]

RonaldR premium

8. April 2018 at 21:51 #35062

Hallo Heiner,

die Frage „Ausserdem hätte ich gerne die aktuelle Uhrzeit im Wiedergabefenster.“ blieb leider unbeantwortet. Gibt es eine Möglichkeit, die aktuelle Uhrzeit im Joggler-Skin anzuzeigen? Als Erweiterung der Darstellungsmerkmale?

Und ist es möglich, die bei Betätigung des Power-Buttons auszuführenden Aktionen zu ergänzen? Ich würde gerne das Backlight reduzieren und beim Berühren des Bildschirms zum erneuten Einschalten des Player wieder auf einen höheren Wert setzen.
Bei mir wird nämlich nach dem Ausschalten die Digitaluhr mit schwarzem Hintergrund angezeigt, was mit deutlich geringerem Backlight auch noch gut erkennbar wäre. Würde den Stromverbrauch reduzieren und die Lebensdauer des Displays erhöhen 😉

Vielen Dank,

RonaldR