Forum Replies Created
-
Posted in: Allo USB Bundle
-
20. Juni 2017 at 14:15 #29659
Tried sudo raspi-config to see if switching locale and keyboard makes a difference. It makes no difference. Maybe I’ll try resetting config. The inconvenience isn’t that serious.
17. Juni 2017 at 12:50 #29579No I tried resetting config 2 or 3 times in the past without success. I ended up reinstalling everything.
26. April 2017 at 17:49 #28573Thanks for your feedback. Reinstalled everything and after that I noticed the Health Checker on the settings page and also the Cam software was updated to 6.3.3. I had max2play 2.42 running for some days or weeks. Maybe previous updates didn’t update everything correctly.
16. Januar 2017 at 20:37 #25986If kodi starts without jivelite running the black bars are black. If I disable JiveLite autostart, manually start Jivelite and start Kodi from JiveLite the black bars show jivelite. No big deal for the few remaining 4:3 video’s.
27. Dezember 2016 at 21:30 #25277Had some time to burn and managed to solve it. Installing RPI cam from SSH also showed problems. apt-get upgrade also showed errors with some uri’s. After I connected both wifi and ethernet the network error was solved and rpicam installed succesfully.
Why? No idea.
20. Dezember 2016 at 19:35 #25089How can I install the rpicam driver from the command prompt? Much easier to spot errors and debug.
19. Dezember 2016 at 19:25 #25042Yes fresh install. First action expand filesystem and update max2play. I see all kind of errors in the yellow frame which quickly disappear.
Uninstalling the rpicam drivers, reboot, adding the tar source and installing again makes no difference.Everytime I start a fresh image I run into old problems like the licencse not activating. Once I set a fixed IP that’s solved. I can’t remember when I installed the rpicam driver (before or after fixed ip)
17. Dezember 2016 at 11:36 #24956Consider it solved. Reinstalled everything from scratch.
RPi Camera fails to start now. I have seen this before. The solutions was to reinstall everything from scratch. That won’t work this time. Uninstalling and installing shows some strange no such file or directory messages:
0 upgraded, 0 newly installed, 0 to remove and 17 not upgraded. Reading package lists... Building dependency tree... Reading state information... gpac-modules-base is already the newest version. liba52-0.7.4 is already the newest version. libfreenect0.2 is already the newest version. libgpac3 is already the newest version. php5-common is already the newest version. php5-readline is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 17 not upgraded. cp: cannot stat ‘www/*’: No such file or directory chmod: cannot access ‘/var/www/rpicam/raspizip.sh’: No such file or directory cp: cannot stat ‘etc/apache2/conf.d/other-vhosts-access-log’: No such file or directory chmod: cannot access ‘/etc/apache2/conf.d/other-vhosts-access-log’: No such file or directory cp: cannot stat ‘etc/sudoers.d/RPI_Cam_Web_Interface’: No such file or directory chmod: cannot access ‘/etc/sudoers.d/RPI_Cam_Web_Interface’: No such file or directory cp: cannot stat ‘bin/raspimjpeg’: No such file or directory chmod: cannot access ‘/opt/vc/bin/raspimjpeg’: No such file or directory /var/www/max2play/application/plugins/rpicam/controller/../scripts/install-rpi-cam.sh: line 101: etc/raspimjpeg/raspimjpeg: No such file or directory cp: cannot stat ‘etc/raspimjpeg/raspimjpeg’: No such file or directory Motion Detection set to internal camera sed: can't read /etc/raspimjpeg: No such file or directory chmod: cannot access ‘/etc/raspimjpeg’: No such file or directory /var/www/max2play/application/plugins/rpicam/controller/../scripts/install-rpi-cam.sh: line 121: etc/motion/motion.conf: No such file or directory sed: can't read etc/motion/motion.conf: No such file or directory cp: cannot stat ‘etc/motion/motion.conf’: No such file or directory Reloading apache2 configuration (via systemctl): apache2.serviceWarning: Unit file of apache2.service changed on disk, 'systemctl daemon-reload' recommended.16. Dezember 2016 at 18:21 #24951I noticed the folder /home/pi doesn’t exist anymore and /home/pi links to /writable/pi which also doesn’t exist.
I have the SD protection plugin installed. Maybe that’s the cause.
13. Dezember 2016 at 22:22 #24862Yes, a cheap dongle based keyboard does the job. I’ll do that, it could include a touchpad in one device. I forgot about this option in my bluetooth quest.
I still wonder why I can succesfully pair and connect a original Apple keyboard and no others. It appears the difference with a „normal“ BT stack is minimal and maybe, maybe the max2play BT stack could support more BT keyboards… Not important anymore.
14. Mai 2016 at 19:09 #20140I needed to select fixed IP in WIFI/LAN to see internet over LAN.
If I now try to start Jivelite with the start button I get an error:
Trying to launch ... NOT successful Click here to show detailed information sudo: unable to resolve host max2play JiveLite 0.1.0 Invalid MIT-MAGIC-COOKIE-1 keyInvalid MIT-MAGIC-COOKIE-1 key[0;33m20160514 17:06:18.057 INFO jivelite - JiveMain.lua:267 JiveLite version 0.1.0[0m [0;31m20160514 17:06:18.061 ERROR jivelite.ui.draw - jiveL_initSDL:204 SDL_Init(V|T|A): Unable to open a console terminal [0m -
