Forum Replies Created
-
I can’t get the Squeezelite to start any more. It use to.
I guess I have to select the right Audio output. I did a lot but still no start.
Got this img of it.
So what Audio output do I pick for „C1+ HiFi Shield“?
-Raymond Day
I got the IQaudIO Pi-DAC+ and the black case for the Raspberry Pi 7″ touchscreen. The HiFi board sticks out the back so the back is not back as fare as it could be so I had to cut part of it out. If I did it again can see how much I did not have to cut off. I got some photos of it.
Had to solder the power wires that go to the Display right on the HiFi board because they would of went back way to fare for the case to fit.
The new stand-offs are all most to big. The one goes right next to the power USB plug. It rubs against it. But it worked. Got them from element14 later seen mouser has the better right size ones.
Cut the 3 holes the 2 big ones and the small one the temp plate from here help with that some but this one is not the same holes. I did a pencil side ways on it to mark were to drill. But it just still would not fit. Used a exacto knife to like whittling the plastic off till it fit.
Had to wait to get the Stand-off’s in the mail. The IQaudIO HiFi board don’t come with the right ones were you can use it with the 7″ Touchscreen Display.
I guess this my help others if they want to do this. I think you could do it better them me from seeing the photos here.
One more photo to see what I guess would ask for.
I did cut the center mount off between the 2 RCA audio plugs. Before I know I had to cut more off the case. Can see now I did not have to cut that off.
O yes the HiFi board is the IQaudIO one.
-Raymond Day
Today in the mail I got the Odroid C1+ and order it with the C1+ HiFi Shield and IR Remote Control and the 3.2 inch Touchscreen Display Shield.
With the HiFi Shield the Pitch Female Pin Headers can not plug in. I guess I need a extender.
Does any one know were I can buy a pin header extender that will work with it?
I played some music with it and it works. I got it on a HDMI screen and it boots up to the log in and shows that only about a sec. Then the screen stays blank.
Any way to temp get it working on the 1080 HDMI screen?
-Raymond Day
So I guess this would be it to order to get it all working on Max2play for the Odroid from this photo.
But the 3.2 inch Touchscreen just says C1 not C1+ and can they all plug in together?
But reading more it says „Tested on ODROID-C1“. But can’t find C1+
Am I right?
-Raymond Day
So do you mean it’s this display.
Looks like it’s sold out right now and cost $120. All most just like the $60 Raspberry Pi 7″ Touchscreen. But this one is a 9″
So is that the set up for the Max2Play on the Odroid C1+?
Or could it be this one the „C1 3.2inch TFT+Touchscreen Shield“? That one cost $25. A 3.2 inch one. A little bigger then the 2.8 inch raspberry Pi one.
Or because you said it can’t show graphics. It is this one, Only $8.90?
The Odroid-show2 can show colorful texts so I guess you mean that one a $25 one. Seems like text would be good for Max2Play because that’s all it has on the old slimp3 is text. It works good too.
Something like this:
-Raymond Day
So are you saying if you get the:
ODROID-C1+
ODROID-SHOW2
HiFi Shield for C1+They all can work together with the image you are making?
All 3 would add up to $101 + shipping, and SD card.
Is this right? I can’t find were they say they can all plug in to each other and not photos of that yet I guess.
Can even buy a remote from them. That be nice if could get it to work like the remote on the Squeezebox radio.
-Raymond Day
Super! It worked. I updated it last night to Beta but could not get it to do the clock, and then in the morning today checked my e-mail and went here and it looked super.
Did a „Update2Beta Max2Play“ and it worked. I could go in the screen saver and pick what clock to use when it’s off.
That’s so good.
I guess the only other thing is what size the clock or fount I guess you say would be. It’s looks a little small on the big 7 inch screen.
I got this photo of mine.
Thank you so much. Only doing the Beta on one of mine.
Love it very impressed!
Under „audioplayer“ go in „Edit Advanced Options“ In Soundcard pick one from the List that sound like what you have. My have to reboot then.
I guess it’s a USB sound so could unplug it check the soundcard list and then plug it in and check the list again to see what changed.
Save it and should be good.
Or on your Pi that works see what soundcard it is set on there and pick that same one for you other.
I seen can install ampache on it now. I went to it’s webinterface and it opens a test one and shows icons of errors. I fixed the errors. No Database so made one with the .sql they have in the /var/www/ampache/sql folder.
Had to edit the config file too for the database name that is root and no password.
So now it gets to the log in and I don’t know the name or password. I looked on the web and seems like there would be a setup to ask you that. But looks like Max2play auto set it up when I clicked install.
What is the name and password for it?
Update. I fixed it. In the /var/www/ampache/config/ampache.cfg.php it has a line „use_auth“ it was set to true and I put it to false so now don’t need a password for it.
I think when I was working on the config I set that like a web page said to.
But there is still a log in I guess to set things up. It don’t know were my files are and I guess have to log in to set that.
So what is the name and password for it?
