[Phanegem]

Phanegem

13. Mai 2019 at 7:50 #45380

Hi, it sounds intressting. Can you explain the hardware part of it.

thanks

[Phanegem]

Phanegem

28. April 2019 at 19:30 #45167

Is it possible to use other pins for the rotery control, i seem to be needing the 24 for something other. 22/23 are free kan i use them and where to change them ?

[Phanegem]

Phanegem

14. September 2018 at 18:03 #37839

i did a clean install
– installed the justboom plug in
– installed the IR Support

changed the lirc.conf to:

#
# this config file was automatically generated
# using lirc-0.8.0(userspace) on Sat Dec 22 19:21:09 2007
#
# contributed by David Greaves [email protected]
#
# brand: Slim Devices           Slim Devices
# model no. of remote control: Squeezebox3
# devices being controlled by this remote: Squeezebox3, MythTV
#

begin remote

  name  Slim_Devices_Squeezebox3
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9100  4416
  one           649  1593
  zero          647   473
  ptrail        649
  pre_data_bits   16
  pre_data       0x7689
  gap          107995
  toggle_bit      0

      begin codes
          KEY_VOLUMEDOWN           0x00FF                    #  Was: Volume-
          KEY_VOLUMEUP             0x807F                    #  Was: Volume+
          KEY_POWER                0x40BF                    #  Was: Power
          KEY_REWIND               0xC03F                    #  Was: Rewind
          KEY_PAUSE                0x20DF                    #  Was: Pause
          KEY_FORWARD              0xA05F                    #  Was: Forward
          Add                      0x609F
          KEY_UP                   0xE01F                    #  Was: Up
          KEY_PLAY                 0x10EF                    #  Was: Play
          KEY_LEFT                 0x906F                    #  Was: Left
          KEY_RIGHT                0xD02F                    #  Was: Right
          KEY_DOWN                 0xB04F                    #  Was: Down
          KEY_1                    0xF00F                    #  Was: 1
          KEY_2                    0x08F7                    #  Was: 2
          KEY_3                    0x8877                    #  Was: 3
          KEY_4                    0x48B7                    #  Was: 4
          KEY_5                    0xC837                    #  Was: 5
          KEY_6                    0x28D7                    #  Was: 6
          KEY_7                    0xA857                    #  Was: 7
          KEY_8                    0x6897                    #  Was: 8
          KEY_9                    0xE817                    #  Was: 9
          KEY_0                    0x9867                    #  Was: 0
          KEY_FAVORITES            0x18E7                    #  Was: Favourites
          KEY_SEARCH               0x58A7                    #  Was: Search
          Shuffle                  0xD827
          KEY_AGAIN                0x38C7                    #  Was: Repeat
          KEY_SLEEP                0xB847                    #  Was: Sleep
          NowPlaying               0x7887
          Size                     0xF807
          Brightness               0x04FB
	  Browse		   0x708F
      end codes

end remote

Does not work

then changend the IR-Button-Configuration for jivelite to (for test)

begin
	remote = Slim_Devices_Squeezebox3
	button = KEY_VOLUMEDOWN
	repeat = 1
	prog = jivelite
	config = Key minus jivelite
end
begin
	remote = Slim_Devices_Squeezebox3
	button = KEY_VOLUMEUP
	repeat = 1
	prog = jivelite
	config = Key plus jivelite
end

Does not work either, please help

• This reply was modified 6 years, 3 months ago by Phanegem.

[Phanegem]

Phanegem

2. Oktober 2015 at 8:23 #15936

I tried it with the wget and it worked, thks

[Phanegem]

Phanegem

30. September 2015 at 22:33 #15908

Hi Raymond,

I’m keep getting this error:

/root/install_max2play.sh: Permission denied

After i do this part:

It takes a little time but the hole text will show up. I chmod it 777 so “chmod 777 install_max2play.sh” then backup a folder with “..” and typed /root/install_max2play.sh

When i type chmod 777 it doesnt gice me an error so i supose that’s is going good.

Thks