patrick

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Back to forum
    Posted in: Allo USB Bundle
  • patrick
    14. Oktober 2015 at 15:48 #16367

    Problem is not the german language. I am german.
    Problem is that i am not able to fix the mount point

    patrick
    11. Oktober 2015 at 16:20 #16272

    I think it might be a problem with the USB Hub.
    Red LED on the Hub starts to flicker after some time and then connction is lost. This also appears when i conncet it to my PC.
    Any suggestions on a powered USB Hub ?

    Nevertheless fixing the mountpoint even with a USB pen drive does not work…..

    Regards Patrick

    patrick
    11. Oktober 2015 at 15:56 #16270

    deleted

    • This reply was modified 9 years, 1 month ago by patrick.
    patrick
    11. Oktober 2015 at 13:07 #16268

    One thing that really drives me crazy is that checking for new files always results in erasing all files from the data base.
    Often i don’t see my hard drive in ANY /media/USB0-7 folders after scanning.
    i think there is something going wrong with automount….
    And i can’t fix the /media/USB folder by UUID.

    I get this when i try to fix the mount point.
    May be there is some thing wrong in the web interface?

    Dateisystem – Mounten von Netzwerkpfaden (Samba/NFS)

    Falscher Pfad:
    Hinzufügen nicht möglich! Bitte Anleitung beachten!
    Pfad Mountpoint Typ Optionen Aktion

    Neuen Mountpoint hinzufügen:

    //192.168.1.100/share
    /mnt/share
    cifs
    user=name,password=pass,sec=ntlm,iocharset=utf8

    Hilfe anzeigen
    Netzwerk Geräte anzeigen

    DEBUG Info

    Externe Laufwerke an Max2Play – Pfade zu USB-Laufwerken

    Diese Liste zeigt die Verzeichnisse für alle externen Speichersticks und Laufwerke. Diese Geräte können über das jeweilige Verzeichnis z.B. im Squeezeboxserver oder in Kodi/XBMC verwendet werden. Achtung: der Raspberry PI kann nur Partitionen bis 2GB verwalten. Sollte die Festplatte größer sein, so muss diese zuerst auf einem System in max. 2GB Partitionen aufgeteilt werden.

    in /media/usb0 (Device with UUID )
    Fixiere Pfad zum USB-Speicher (bleibt bei Neustart erhalten):

    • This reply was modified 9 years, 1 month ago by patrick.
    patrick
    10. Oktober 2015 at 22:51 #16266

    Me again,
    I removed the # at the last line of /etc/default/hdidle
    and changed the value from 180 to 6000.
    But the HD goes to idle mode even during scanning and causing a system crash.

    patrick
    8. Oktober 2015 at 19:43 #16237

    Hi, Heiner
    Thanks for helping me.

    So far i did not change anything outside the max2play interface.
    I dont have any other Hardware but the HDD together with the powered hub, As the Power from the U3 is not enough.
    I think the drive is not going into idle mode to early but it does not wake up correctly.

    I will send some Screenshots (is it possible here?) of the errors Tomorrow.

    Regards Patrick

    patrick
    7. Oktober 2015 at 21:37 #16107

    Problem persists even with a New Installation.
    It seems that the Problem occurs After Hdd idle and can only be overcome by an restart.

    patrick
    7. Oktober 2015 at 18:22 #16106

    I am right now reflashing my eMMC Card.

    But i woulgd have been nice to know what went wrong.

    Problems occured without any known reason. I updated ubuntu after having the first problems.

    So you recommend not to update ubuntu?

    Another Question: is it possible to fix the mount point by UUID on an Odroid U3?

    patrick
    7. Oktober 2015 at 7:38 #16087

    I don’t know where to start searching for the failure.
    It worked flawlessly for some days. Then i had to change the USB Hub due to problems with powering the HDD. I don’t know whether it was caused by the hub or the power adaptor.
    Even when scanning the music collection seems to be okay it is not. There are several Albums missing and the Albumart is not complete.
    It is a very strange issue as with every attempt of rescanning the max2play interface shows one more USB Drive which i can’t connect.
    (It’s hard to explain in english…)
    I also tried to fix the mount point by UUID, which also doesn’t work (Is it correct that the max size for the Pi is 2 GB ?) I am working woth an U3 hoping that the U3 can handle a 1 TB HDD.

    Would it be helpful to add the HDD to fstab manually?
    Does hdidle work with drives managed by fstab?

    Ah forgot to mention that I updated max2play and ubuntu via the interface / apt-get update apt-get upgrade

    Very frustrating 🙁

    Patrick

    • This reply was modified 9 years, 1 month ago by patrick.
    • This reply was modified 9 years, 1 month ago by patrick.
Viewing 9 posts - 1 through 9 (of 9 total)