[Neil H premium]

Neil H premium

15. Mai 2018 at 15:43 #35699

Dear Sir,
My RasPi OLED Is working under V2.46-Stretch. However, CEC under Jivelite now claims to install properly but doesn’t activate. No errors shown. No control either. This is on all same hardware that was working for me under V2.45-Jesse.

Thanks
Neil

[Neil H premium]

Neil H premium

14. Mai 2018 at 18:57 #35682

Sir, here is more information from my testing.
RasPi OLED Display Broken. After a short period, displays garbage characters.

Max2Play Version 2.46
Max2Play Version Beta-180411 Raspberry PI 3

#### KERNEL #### Linux max2playDavid 4.9.39-v7+ #1020 SMP Sat Jul 22 14:21:01 BST 2017 armv7l GNU/Linux

#### LINUX-VERSION ####
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 8.0 (jessie)
Release: 8.0
Codename: jessie

#############################################################################################
RasPi OLED Display working, CEC not working. ALL tests on the same hardware.

TestM2Play V2.45-Stretch
#### KERNEL ####
Linux TestM2play 4.14.24-v7+ #1097 SMP Mon Mar 5 16:42:05 GMT 2018 armv7l GNU/Linux

#### LINUX-VERSION ####
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 9.3 (stretch)
Release: 9.3
Codename: stretch

###############################################################################################
RasPi OLED Display working, CEC STILL not working. ALL tests on the same hardware.
#### KERNEL ####
Linux TestM2play 4.14.39-v7+ #1112 SMP Sat May 5 12:01:33 BST 2018 armv7l GNU/Linux

#### LINUX-VERSION ####
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 9.4 (stretch)
Release: 9.4
Codename: stretch

[Neil H premium]

Neil H premium

11. Juli 2017 at 18:52 #29889

Dear Sir,
Just started testing the „beta“. So far it seems to be working well.
Kudos for your quick response and hard work.
Thanks to all involved!

[Neil H premium]

Neil H premium

6. Juli 2017 at 20:02 #29847

My configuration
Pi3 W/32GB PNY micro SDHC card. I-Sabre V3, rev 3 DAC.
Power supply is a lab grade linear, voltage set at 7.5V DC Current set to 3A max.
Display is wired straight accross. Display header pins (DAC) 1-6 straight to display via supplied 6 conductor

cable. Display header pins (DAC) 7-10 are open. Display header pins (DAC) 11-16 are wired straight

accross to the display via supplied 6 conductor cable.
Fresh down load of max2play Pi V2.43. Zip file tested for corruption, none found.
SDHC card formatted via SDFormatter V4.0, option format type=Full (overwrite).
Image written to card via Win32 Disk Imager for ODROID. copy reported good.
Booted Pi to expand memory, then entered registration info, booted to green „Activated“ code.
On Audiophonics page, chose I-Sabre V3 for installed audio card.
Squeezelite is running. Soundcard shown is „sysdefault-snd_rpi_hifiberry_dac“
Selected advanced install and completed same.
Selected „Power Button“ install. Completed same. Button working fine.
Selected „Display“ install…….. Below are screen copies of installation and failure.

Update Configfile – new Entry created

DISPLAY_AUTOSTART successfully added to autostart

Display Setup Started

Installation started – This Messages refreshes every 3 seconds to show current installation status. When

finished this message disappears.

—————————————-
Cleaning up…
Command /usr/bin/python -c „import setuptools, tokenize;__file__=’/tmp/pip-build-

imNGCF/regex/setup.py‘;exec(compile(getattr(tokenize, ‚open‘, open)(__file__).read().replace(‚\r\n‘, ‚\n‘),

__file__, ‚exec‘))“ install –record /tmp/pip-SahCXK-record/install-record.txt –single-version-externally-

managed –compile failed with error code 1 in /tmp/pip-build-imNGCF/regex
Storing debug log for failure in /root/.pip/pip.log
Downloading/unpacking pylms
Downloading pylms-1.0.tar.gz
Running setup.py (path:/tmp/pip-build-N_GGQG/pylms/setup.py) egg_info for package pylms

Installing collected packages: pylms
Running setup.py install for pylms
changing mode of build/scripts-2.7/pylms from 644 to 755

changing mode of /usr/local/bin/pylms to 755
Successfully installed pylms
Cleaning up…
Downloading/unpacking python-mpd2
Downloading python-mpd2-0.5.5.tar.gz
Running setup.py (path:/tmp/pip-build-IMGLIu/python-mpd2/setup.py) egg_info for package python-mpd2

Installing collected packages: python-mpd2
Running setup.py install for python-mpd2

Successfully installed python-mpd2
Cleaning up…
Set SERVER ADDRESS to
Use Interface eth0 with b8:27:eb:9a:cd:41
Set MAC ADDRESS to b8:27:eb:9a:cd:41
Activated Squeezebox Server in RaspDAC-Display
Finished – Reboot needed: Click here to Restart Device

This is the end of the first display install attempt on a virgin image of Pi 2.43

##############################################################################

Additional Settings for Audiophonics

Power Button
Display

Install and configure the Winstar OLED Display
The installer will automatically set all values for you. Choose the purpose of this player (Squeezebox /

MPD) before installing the display.

Display script NOT Running!
RE-Install Display Software

Autostart Display Manager:

Thanks to dhrone and the Github Repository https://github.com/dhrone/Raspdac-Display for sharing this

Display Manager!

This is the outcome of the 1st reboot after display install attempt.
############################################################################

Max2Play – Audiophonics Edition

Display Setup Started

Installation started – This Messages refreshes every 3 seconds to show current installation status. When

finished this message disappears.

Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://archive.raspberrypi.org jessie/ui Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Reading package lists…
/opt /var/www/max2play/public
Delete Existing RaspDac-Display Folder
Cloning into ‚Raspdac-Display’…
/opt/Raspdac-Display /opt /var/www/max2play/public
Reading package lists…
Building dependency tree…
Reading state information…
python-pip is already the newest version.
python-setuptools is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 45 not upgraded.
Requirement already satisfied (use –upgrade to upgrade): moment in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied (use –upgrade to upgrade): dateparser>=0.6 in /usr/local/lib/python2.7/dist-

packages (from moment)
Requirement already satisfied (use –upgrade to upgrade): pytz>=2017.2 in /usr/local/lib/python2.7/dist-

packages (from moment)
Requirement already satisfied (use –upgrade to upgrade): times in /usr/local/lib/python2.7/dist-packages

(from moment)
Cleaning up…
Requirement already satisfied (use –upgrade to upgrade): pylms in /usr/local/lib/python2.7/dist-packages
Cleaning up…
Requirement already satisfied (use –upgrade to upgrade): python-mpd2 in /usr/local/lib/python2.7/dist-

packages
Cleaning up…
Set SERVER ADDRESS to
Use Interface eth0 with b8:27:eb:9a:cd:41
Set MAC ADDRESS to b8:27:eb:9a:cd:41
Activated Squeezebox Server in RaspDAC-Display
Finished – Reboot needed: Click here to Restart Device

Additional Settings for Audiophonics

Power Button
Display

Install and configure the Winstar OLED Display
The installer will automatically set all values for you. Choose the purpose of this player (Squeezebox /

MPD) before installing the display.

Display script NOT Running!
RE-Install Display Software

Autostart Display Manager:

This is the outcome of the 2nd and all subsequent attempts to install the display software……

[Neil H premium]

Neil H premium

5. Juli 2017 at 18:11 #29834

Sir, thank you for your response. I’ve noticed the link to assymbly instructions from the shop / bundles page for the raspDAC returns 404 page not found errors.

I have the I-Sabre V3 rev 3 Audiophonics DAC. I have connected the supplied cables in „straight across“ configuration with the 4 pins in the middle of the display header unattached. I have followed your instructions to the letter. All of my software installs have been from the Pi V2.43 version on your web site. Each time I have done a fresh format of the memory card, then restored the image file to the card for a virgin installation. The Pi3 runs fine. I am using the „complex“ install with Squeeze Play / LMS 7.9. All of this software runs perfectly. When I install the push-button support from the „Audiophonics“ page, the button works fine. My problem is that I can not get the „display“ software to show that it has started after multiple installations ! I don’t see any error messages, just the „display“ page, alert to „Re-install“ the software. This has not worked for me. I am building 2 servers and have the same problem with both. This leads me to believe I have some type of software or installation fault. Please advise.

Neil H