Forum Replies Created
-
Posted in: Allo USB Bundle
-
24. November 2018 at 13:40 #42221
Yes I have tried that several times and that did not fix the issue
19. Oktober 2018 at 22:33 #38706I turned on Bluetooth on the phone and then scanned for Bluetooth in Max2play. I tried with an iPhone 7 and iPhone 6 and neither are seen by max2play. Phones do not see max2play/rPi either. Only the Samsung tv Bluetooth is visible in max2play
19. Oktober 2018 at 6:18 #38686I turned off DLNA Server and tried to connect with Bluetooth again. iPhone still does not appear. Log is below
#### Bluetooth Installation ####
#### Bluetooth Dongle ####
hci0: Type: Primary Bus: UART
BD Address: B8:27:EB:DC:5F:52 ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:2350 acl:0 sco:0 events:61 errors:0
TX bytes:2319 acl:0 sco:0 commands:53 errors:0#### BLUEALSA RUNNING ####
1#### BLUETOOTH SQUEEZEBOX SERVER AUTOSTART ####
19. Oktober 2018 at 1:07 #38684#### Bluetooth Installation ####
#### Bluetooth Dongle ####
hci0: Type: Primary Bus: UART
BD Address: B8:27:EB:DC:5F:52 ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:7990 acl:0 sco:0 events:151 errors:0
TX bytes:3264 acl:0 sco:0 commands:109 errors:0#### BLUEALSA RUNNING ####
1#### BLUETOOTH SQUEEZEBOX SERVER AUTOSTART ####
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.That’s all it has. It’s a raspberry pi3 but not sure which version. Downloaded and installed max2play on 16gb sd card.
Then I updated through the web interface. I’m also using LMS version 7.9 nightly. I installed DNLA server and shareport. Audio output to speakers (for squeezelite) is thru the headphone jack.
15. Oktober 2018 at 4:40 #38603I am having the same problem with my iPhone7 and raspberry pi3. I cannot see the pi Bluetooth on my phone. I cannot see my phone on max2play Bluetooth scan. But I can see other devices.
Why can’t the iPhone 7 and max2play see each other in Bluetooth settings
-