Mbydeen

Forum Replies Created

Viewing 30 posts - 241 through 270 (of 309 total)
1 2 3 … 8 9 10 11
  • Back to forum
    Posted in: Mobile Boombox with Max2Play and LMS
  • Mbydeen
    20. Februar 2017 at 15:09 #27045

    Dear Raymond Day,

    Thank you for your offer 🙂

    But we mainly provide technical support mainly for Raspberry pi.

    Regards,
    Mohammad

    Mbydeen
    20. Februar 2017 at 14:59 #27044

    Dear Raymond Day,

    Unfortunately, we do not provide technical support for NanoPi Neo Air neither NanoHat PCM5102A at the moment.

    Regards,
    Mohammad

    Mbydeen
    20. Februar 2017 at 14:52 #27042

    Dear Alex,

    Thank you for your post.

    We recommend you to use Pi3 with the latest Max2Play version, but you can start your own project and we are happy to help 🙂

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    20. Februar 2017 at 14:38 #27040

    Dear Raymond Day,

    Unfortunately, we do not provide technical support for NanoPi Neo Air neither NanoHat PCM5102A at the moment.

    Regards,
    Mohammad

    Mbydeen
    20. Februar 2017 at 14:25 #27039

    Hi apakett,

    You can use this command to over come the permission problem, you open the brightness file and write the value between 0-255:

    pi@max2play:/sys/class/backlight/rpi_backlight $ sudo nano brightness

    Regards,
    Mohammad

    Mbydeen
    20. Februar 2017 at 13:37 #27038

    Hi Cyn

    We are happy to help.

    You can download Eclipse and connect remotely to the pi and browse the project files, and then you can add your page. or run your page separately on the pi, since Max2Play image has already PHP and Apache installed.

    Regards,
    Mohammad

    Mbydeen
    20. Februar 2017 at 13:16 #27037

    Hi wenkman,

    Please can you check iptables firewall. iptables is a user-space application program that allows a system administrator to configure the tables provided by the Linux kernel firewall. you can change the configuration to allow port 631 to accept data packets. Please check the following webpages:

    https://help.ubuntu.com/community/IptablesHowTo
    https://ubuntuforums.org/showthread.php?t=1849117

    Regards,
    Mohammad

    Mbydeen
    20. Februar 2017 at 13:02 #27035

    Hi snaillybob,

    Please make sure that the plugins are up to date and compatible with the latest version of SBS, and if you have any problem, you can contact the developer on:

    erland’s Profile: http://forums.slimdevices.com/member.php?userid=3124
    Erland Isaksson: http://erland.isaksson.info

    Regards,
    Mohammad

    Mbydeen
    16. Februar 2017 at 15:32 #26962

    Dear JustBoom,

    Thank you for providing your help.

    Regards
    Mohammad Mbydeen

    Mbydeen
    16. Februar 2017 at 15:19 #26957

    Dear snaillybob,

    Please can you specify which Erland Isaksson plugin exactly you are trying to add to Squeezebox server ?

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    16. Februar 2017 at 14:22 #26956

    Dear Tom,

    Sorry, but your question is more related to AVR, and we can not provide you technical support regarding this matter. And please try to post just one thread for each problem or suggestion you have, so we can follow and provide you the help regarding your technical issues.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    16. Februar 2017 at 14:06 #26954

    Hello Cyn,

    We provide plugin builder, which enable you to develop your own plugin or webpage, check it out:

    https://www.max2play.com/en/portfolio/plugin-pluginbuilder-2/

    Also You can connect to the raspberry pi using SSH plugin:

    https://www.max2play.com/en/portfolio/plugin-remote-control/

    Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Februar 2017 at 15:39 #26941

    Dear julandco,

    the Sysdefault option and HW option are the same, it is just the naming of the Card – technically it will be the same, the Options are printed by squeezelite and they are different on different systems.

    Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 8 months ago by Mbydeen.
    Mbydeen
    15. Februar 2017 at 15:27 #26940

    Dear Tom,

    Thank you for your post.

    You can open the web-interface of the squeezebox server desktop application and then choose the player, which is in this case your pi, and you have to make sure that the Squeezelite player is ruining on your pi.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Februar 2017 at 14:58 #26939

    Dear volderette,

    Thank you for your suggestion, we will pass this suggestion to our development team and then consider it.

    Regards
    Mohammad Mbydeen

    Mbydeen
    15. Februar 2017 at 14:44 #26937

    Dear nickgosling,

    Sorry for the late response, I think burning a new Max2Play image will solve the problem. please inform us about the results.

    Regards
    Mohammad Mbydeen

    Mbydeen
    15. Februar 2017 at 14:18 #26935

    Dear TJH,

    We suggest you to post your questions to android apps forums, maybe you will get an answer 🙂

    Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 8 months ago by Mbydeen.
    Mbydeen
    15. Februar 2017 at 14:10 #26934

    Dear eborr,

    Sorry to inform you that we do not support Meridian Explorer USB DAC, Please take a look on the audio cards that we offer:

    https://shop.max2play.com/de/audio-boards.html

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Februar 2017 at 13:35 #26933

    Dear Tom,

    You can just ignore the message as it is not important for the average user.If you want to get rid of this warning and enable cgroups, add the following to your kernel command line:

    sudo nano /boot/cmdline.txt
    add line : cgroup_enable=memory (before elevator=deadline)

    Regarding the wifi, what is the wifi usb that you are using ? we recommend you to use the wifi usb from our shop, because it seems there is a problem with initialising the driver interface:

    https://shop.max2play.com/en/catalogsearch/result/index/?cat=4&q=wifi

    Another question, have you installed LMS application for windows in your PC ?
    from this website ?
    http://downloads.slimdevices.com/nightly/?ver=7.9

    If so, it means that you have two servers in the network, and thats not recommended, we recommend you to use just one LMS.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Februar 2017 at 12:58 #26932

    Dear Tom,

    In order to hear audio from the pi and use your computer to play another audio files at the same time, I think you have to check the AVR settings, LMS UI is used to control the Squeezelite audio player to help you to play music using the web browser. How could you play audio from the pi, by only viewing the LMS UI ? Sorry, I am still confused about your question !!

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Februar 2017 at 12:35 #26931

    Dear wenkman,

    Please make sure that you disabled IPv6 on the raspberry settings page, because enabling IPv6 could cause broken links. and then you can check the CUPs service using this commands:

    nmap -v -sV localhost -p 631
    sudo netstat -tnlp | grep :631

    And please check the firewall settings if you are accessing the Print server from outside.

    for more information, please check the following webpage:

    http://serverfault.com/questions/725262/what-causes-the-connection-refused-message

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 17:03 #26927

    Dear southafricanrob,

    Sorry for the late reply, please try to update Max2Play version to the latest version 2.41, and try again.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 17:00 #26926

    Dear heinzelrumpel,

    Please try to burn a new image and the update the kernel, it could be some systems files are damaged.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 16:52 #26925

    Dear splitek,

    Sorry for the late response, we have tested TuneBlade and you can configure the settings for the latency, by clicking on settings > AirPlay Streaming > and choose Real-time Streaming or Custom buffer size to 0.

    I think that solution would be the most convenient for you, instead of recoding the plugin, if you are a developer, you can check the whole project on:

    https://github.com/max2play/webinterface

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 15:28 #26922

    Dear Mnyb,

    Sorry for the late response, We have tested the password protection plugin, and we dont think that it has any bugs, please have a look on this video:

    https://www.youtube.com/watch?time_continue=57&v=J-kJiXcfwcU

    And you could try to configure your browser to remember the password that you setup for the web-interface.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 15:08 #26920

    Dear NoodlePi,

    When you configure Filesystem – mount network paths (Samba or NFS), you can try to create one mount point, and one Sambashare and choose writeable option „Yes“ and the create mode „644“, which guarantee full permission to the folder, then go the folders explorer in Windows, then create the sub folders from there.

    I hope that could help.

    Best Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 8 months ago by Mbydeen.
    Mbydeen
    14. Februar 2017 at 13:23 #26918

    Dear t0m,

    Thank you for the detailed description of your problem, I think your problem is simple, in order to open the web browser on the pi, you should go to Max2Play web-interface and click on Raspberry settings and then scroll down to the end of the web page, you will see :

    Install Iceweasel (Firefox Browser) on Desktop:

    Click install, then the web browser will be installed.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 12:58 #26917

    Dear apakett,

    You can apply the commands in the link we sent you using bash ssh session, not in the Squeezelite Command Line, and in order to apply these commands you need to install the following plugin:

    https://www.max2play.com/en/portfolio/plugin-remote-control/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 12:37 #26916

    Dear wenkman,

    you can try to do a simple test to see if the port accepts connections. you can use the nc command and the”-vz” option:

    nc -vz IP_Address Port

    for more information you can have a look at:

    https://support.rackspace.com/how-to/testing-network-services-with-netcat/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    14. Februar 2017 at 12:24 #26915

    Dear neil,

    Thank you!

    Let us know what Audiophonics will answer you.

    Best Regards,
    Mohammad Mbydeen

Viewing 30 posts - 241 through 270 (of 309 total)
1 2 3 … 8 9 10 11