Mbydeen

Forum Replies Created

Viewing 30 posts - 211 through 240 (of 309 total)
  • 27. Februar 2017 at 14:35 #27263

    Hi yakelkun

    Thank you to share this on our forum 🙂

    Regards,
    Mohammad Mbydeen

    27. Februar 2017 at 14:01 #27262

    Hi Raymond Day

    Thank you to share your experience with NanoPi Neo Air in our forum, and we are happy that you solved your problem.

    Best Regards,
    Mohammad Mbydeen

    27. Februar 2017 at 13:56 #27261

    Hi Raymond Day

    Thank you to share your experience with NanoPi Neo Air in our forum, and we are happy that you solved your problem.

    Best Regards,
    Mohammad Mbydeen

    27. Februar 2017 at 13:37 #27260

    Hi,

    you can unsubscribe from all the emails from the forum, by going to each topics and click the unsubscribe button for each button.

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 16:02 #27176

    Hi mgunis

    Please note that we does not support displays from waveshare, you can try to install Max2Play image and display plugin, but we can not grantee that your display will work without any problems, for more information about the displays that we are offering in our shop, please take a look on this webpage:

    https://shop.max2play.com/en/accessories/displays.html

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 15:41 #27175

    You are very welcome 🙂

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 15:27 #27174

    Hi Bull

    Please note that Max2Play software does not support 5 inch display.Normally the display uses the GPIO pins on the raspberry pi, and to setup an audio card you need „extra“ GPIO pins.regarding the audio cards, some of the audio cards have GPIO pins that could be connected via „jumper“ cables and other you have to solder pins onto the sound card by yourself,please read this wiki page:

    https://www.max2play.com/en/wiki/7-touch-screen-connect-the-gpio/

    please have a look at our shop webpage for the audio cards that we are offering at the moment:

    https://shop.max2play.com/en/audio-boards.html

    and for the displays and the bundles please check the following links:

    https://shop.max2play.com/en/accessories/displays.html

    https://shop.max2play.com/en/bundles/by-type/display-bundles.html

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 14:22 #27172

    Hi Alex,

    You can easily turn your device into an accesspoint for other WiFi-devices. Once installed the new WiFi network created by this device enables other devices to access its features and services. It also shares the internet connection if available and forwards all traffic to the LAN-network.as long as the accesspoint is installed, you cannot connect to other WiFi-networks with this device.

    Installing Bluetooth plugin provide support and connection to your device to use your Bluetooth-Speakers. After installing Bluetooth you have to assign the soundcard Bluetoothspeaker or Pulse to your audioplayers. Do this on the Audioplayer page in advanced settings.

    I dont see any problem with coexistence between access point plugin and bluetooth plugin, please go a head and try to configure it, and we will provide the help 🙂

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 13:53 #27170

    Hi Raymond Day,

    Thank you for your post. we are happy the you solved the problem.

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 13:34 #27168

    Dear Raymond Day,

    Once again,please note that we do not provide technical support for Nano Pi Neo Air, Max2Play image has been developed mainly for Raspberry Pi and ODROID.

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 12:53 #27166

    Dear phamd4,

    Please uncheck the box for Enable I2S-MMAP (Mixerdevice for Soundcards)and enter the following into the shairport commandline: -t hardware -m hw:CARD=sndrpihifiberry -c Digital, hope this will solve your problem.

    Regards,
    Mohammad Mbydeen

    23. Februar 2017 at 12:38 #27165

    Dear apakett,

    You are very welcome, we are always trying to help 🙂

    Regards,
    Mohammad Mbydeen

    22. Februar 2017 at 15:16 #27123

    Dear Raymond Day,

    Please try to connect directly to the LAN via cable, then you could unchecked this box. Max2Play always needs an IP to operate.

    Regards,
    Mohammad Mbydeen

    22. Februar 2017 at 13:39 #27121

    Dear NorbertB,

    You are very welcome 🙂

    Regards,
    Mohammad

    22. Februar 2017 at 13:08 #27118

    Dear NorbertB,

    Please try only entering “-o plug:plugequal” in the command line, for more info please take a look at this thread:

    https://www.max2play.com/en/forums/topic/equalizer/

    Regards,
    Mohammad Mbydeen

    22. Februar 2017 at 13:03 #27117

    Dear snouf,

    The build-in plugin should work probably without the need to have USB dongle, please try to install new Max2Play image and try again.

    Regards,
    Mohammad Mbydeen

    22. Februar 2017 at 12:52 #27115

    Hi Raymond Day,

    Of course you can remove them by making new image, but if have already an image and you don’t want to lose all the settings you configured just to remove plugins, there is an option to deactivate the plugins.

    Regards,
    Mohammad

    22. Februar 2017 at 12:38 #27112

    Hi Raymond Day,

    At the moment you can not remove the plugins entirely, there are only two options, Active Plugins and Available Plugins.

    Regards,
    Mohammad Mbydeen

    22. Februar 2017 at 12:11 #27111

    Dear apakett,

    Unfortunately, we can not provide you a solution now to control the screen saver clock brightness, we think about it and get back to you soon.

    Regards,
    Mohammad Mbydeen

    21. Februar 2017 at 16:24 #27093

    Dear Frederik,

    Please note that we do not provide technical support for sparky board at the moment.

    Best Regards,
    Mohammad Mbydeen

    21. Februar 2017 at 15:54 #27091

    Dear edmost,

    Please can you explain more about remote communication ?. To solve the Kodi Problem: Update Max2Play to latest Beta and do Kernel upgrade at the bottom of Raspberry Pi Settings Plugin, should upgrade to Kernel 4.9

    Regards,
    Mohammad Mbydeen

    21. Februar 2017 at 15:45 #27090

    Dear Axel,

    We are sorry that you have been disappointed about our product, but in Max2Play, we are always trying to provide the best experience to our customers, therefore, we are always working on improving the functionality and the user experience of Max2Play everyday.

    1. Please make sure that you are using the suitable power supplier, using the wrong one could cause many problems.

    2. To solve the Kodi Problem: Update Max2Play to latest Beta and do Kernel upgrade at the bottom of Raspberry Pi Settings Plugin, should upgrade to Kernel 4.9

    3. Max2Play has only one Output at a time is possible,either HDMI or Display.

    Best Regards,
    Mohammad Mbydeen

    21. Februar 2017 at 14:50 #27086

    Dear Benjamin,

    Have you tried to play audio form the pi directly without HiFiBerry DAC. what are the the settings that you have configured in the Audioplayer and on the HiFiBerry DAC plugins ?

    Regards,
    Mohammad Mbydeen

    21. Februar 2017 at 12:42 #27080

    Dear phamd4,

    Please make sure that you have the latest version of Max2Play, which is 2.41, then can you send us the configuration that you are using in hifiberry Digi+ plugin and Audioplayer plugin.

    Regards,
    Mohammad Mbydeen

    21. Februar 2017 at 12:30 #27079

    Dear Raymond Day,

    Please note that we do not support NanoPi NEO Air at the moment.

    Regards,
    Mohammad

    21. Februar 2017 at 12:15 #27078

    Dear apakett,

    Please make sure that you saved the file correctly, there is no need to restart the pi, also make sure that you have the latest version of max2play, which is 2.41

    We have test the brightness on our lab and it works fine, and we are considering to add this functionality to our display plugin.

    Best Regards,
    Mohammad Mbydeen

    21. Februar 2017 at 11:55 #27075

    Dear Raymond Day,

    We are happy that your problem has been solved 🙂 and thank you for sharing the solution on the forum.

    Regards,
    Mohammad

    21. Februar 2017 at 11:48 #27073

    Dear wenkman,

    On Max2Play the remote administration is enabled by default, but thank you to write the solution to enable the remote administration for CUPs.We are happy that your problem has been solved.

    Regards,
    Mohammad

    20. Februar 2017 at 16:54 #27051

    Hi Alex,

    You are very welcome 🙂

    Regards
    Mohammad

    20. Februar 2017 at 16:28 #27049

    Dear nickgosling,

    In the display plugin, please make sure that you configure the right settings. Otherwise, It could be a hardware damage, the damage could be occurred in the process of changing different power suppliers, or the screen digitizer could also be damaged.

    Regards,
    Mohammad

Viewing 30 posts - 211 through 240 (of 309 total)