Forum Replies Created
-
20. März 2017 at 13:48 #27803
Hello arnaju
If you are able to reach the webinterface by name but not by IP, I think because the IP has been changed. If you are using windows, you can know the IP by using nslookup tool in Windows CMD, if you dont want this problem to occur again, you can assign a static IP to your device.
Best Regards,
Mohammad Mbydeen20. März 2017 at 12:28 #27801Hi Paden,
From the screen shot that you sent, you just configured the mount point, but also you have to configure External Drives on Max2Play – mountpoints for USB-Storage.
Please take a look on this information:
Network Shares (e.g. shares on Synology Diskstation with SMB/CIFS) are mounted following the example:
*Path (IP or hostname and Path): for type cifs: //IP-ADDRESS/PATH
*Mountpoint on Max2Play (for usage in Squeezebox Server or XBMC): /mnt/mountdir/ Mountpoint must be a subdirectory in /mnt/ OR /media/ and will be generated, if it is not existing.
*Type: mostly cifs (in special NFS setups nfs)
*Options (user, password and other options for network share): e.g. user=name,password=pass,sec=ntlm,iocharset=utf8
*important: always add to the options sec=ntlm!
*Note on NFS-Shares: you must use another Path and no user credentials in options! Example: IP-ADDRESS:PATH or *:PATHUnder External Drives on Max2Play – mountpoints for USB-Storage
there is a list that shows all external storages and their mountpoints. You may access the devices by their path in Squeezeboxserver or XBMC/Kodi. Important: the maximum partition size is 2TB. If using larger disks you need to divide the disk space into partitions smaller than 2TB.Best Regards,
Mohamamd Mbydeen15. März 2017 at 15:34 #27758Hi huy
Please make sure that you have installed the sound correctly on the RPI settings and you have configured the correct settings on ausdioplayer plugin and raspberry pi plugin, you should see the sound card as an option in the Audioplayer plugin.
Also it could be a hardware problem. Please send us pics of you can, it might be beneficial for us to help you.
Regards,
Mohammad Mbydeen15. März 2017 at 14:10 #27756Hi ltjimdangle
Yes you can accomplished with a collection of RPis and M2P, its called multiroom audio system, please check out this article about the setup:
https://www.max2play.com/en/2016/07/build-your-own-multiroom-audio-system/
Best Regards,
Mohammad Mbydeen15. März 2017 at 12:34 #27744Hi asplundj
I want to change the Squeezebox server name, you can change the (Player Name) on the setting/Reboot and then the name of the server will be changed, and you can change the player name, by by adding „-n“ to the commandline in Squeezelite on the Audioplayer plugin.
Best Regards,
Mohammad Mbydeen14. März 2017 at 16:39 #27735Hi guymaurier
Thank you for your suggestion.
Please note that Jivelite Copyrights and Credits: Logitech, as they developed the software for the Squeezboxes and set it under BSD-License, Triode and Ralphy from Squeezebox-Forum for support and ongoing development of Jivelite. The Jivelite version for Max2Play has some changes for improved support for touchscreens and to activate the clock as screensaver.
Maybe you can post this suggestion on Squeezebox-Forum.
Best Regards,
Mohammad Mbydeen13. März 2017 at 13:22 #27650Hi ringeraja
You can login form author device as you mentioned using the web browser, Max2Play is about the usability for setting up a system that is easy to use by beginners, Moreover you can always connect keyboard and mouse to RPI and use Max2Play, but you have to Install Iceweasel (Firefox Browser) on Desktop, on the raspberry setting on the webinterface.
Regards,
Mohammad Mbydeen13. März 2017 at 13:08 #27648Thank you for sharing these information, we are working on updating the raspberry pi firmware on our new image.
Sorry we could not help you with that, since we do not provide technical support for pHAT BEAT at the moment.
Best Regards,
Mohammad Mbydeen13. März 2017 at 12:59 #27644Hi huy
Please make sure that you have installed the sound correctly on the RPI and you have configured the correct settings on ausdioplayer plugin and raspberry pi plugin. also it could be a hardware problem. Please send us pics of you can, it might be beneficial for us to help you.
Regards,
Mohammad Mbydeen12. März 2017 at 19:22 #27606try to erase anything entered in the commandline and try the use the equalizer.
Regards,
Mohammad Mbydeen11. März 2017 at 18:12 #27585Hi boogityman
I think that you could not use the 3.5mm audio jack on the RPi as an audio input, please check the following links:
http://raspberrypi.stackexchange.com/questions/43320/raspberry-pi-3-audio-input
http://raspberrypi.stackexchange.com/questions/23322/use-raspberry-pi-3-5mm-jack-as-line-in
Regards,
Mohammad Mbydeen8. März 2017 at 16:18 #27511Hi martyb,
Maybe you can try to connect to Wifi by entering SSID and an empty password, you can have a look at this link:
http://superuser.com/questions/412741/encrypted-wifi-with-no-password
Regards,
Mohammad Mbydeen -
