[Mbydeen]

Mbydeen

31. Januar 2017 at 12:48 #26467

Dear heinzelrumpel,

It seems that you can not reach the Git server, therefore pleaes could you check the following:

1. If you are using proxy, please check the proxy settings.
2. Check the firewall settings that could blocked the port 443.
3. Make sure that IPv6 is disabled.
4. Check the DNS settings.

Best Regards,
Mohammad Mbydeen

• This reply was modified 7 years, 10 months ago by Mbydeen.

[Mbydeen]

Mbydeen

30. Januar 2017 at 12:30 #26404

Hello gapmedia,

Please make sure that you should choose nl80211 For the Raspberry Pi 3 in the accesspoint setup page for the WiFi Driver, if something is not working. Otherwise leave it empty.

And we recommend you to use EDiMax for the wifi stick.

Best Regards,
Mohammad Mbydeen

• This reply was modified 7 years, 10 months ago by Mbydeen.

[Mbydeen]

Mbydeen

30. Januar 2017 at 11:49 #26401

Hello DBP,

Please check your interent connection, you can try to ping 8.8.8.8 to check if you are able to get packets out to the internet,and you have to check the DNS configuration, you can have a look on those webpages, some people faced similar problem :

http://raspberrypi.stackexchange.com/questions/39869/sudo-apt-get-update-continually-errors-despite-reboots

http://raspberrypi.stackexchange.com/questions/54669/unable-to-apt-get-update-but-connected-to-internet

Regards,
Mohammad Mbydeen

[Mbydeen]

Mbydeen

26. Januar 2017 at 15:25 #26331

When using an external soundcard and direct sound output (higher sound quality) just one player must have exclusive access to the soundcard. For this setting there are two possible options:

1.Install Shairtunes for Squeezebox Server (easy installation on Squeezebox Server tab in Max2Play). With this setting all Squeezebox Clients will have Airplay support, but can’t run synchronized. That means you may just play sound via Airplay at one device at a time.

2. Setup Shairport on each Max2Play device and use advanced Settings in Shairport to automatically disable the Squeezelite player on the device once a stream is played via Airplay. This setting has the advantage of a dedicated Airplay Player on each device, that can be sychronized with iTunes to a multiroom setup.

And please make sure that the Airplay service is running, and the Hifiberry Digi+ sound card is selected as default sound card, we recommend yout to have a look at Max2Play Raspberry Pi 2 Image for HiFiBerry Sound Cards DAC+ Amp+ Digi+

https://www.max2play.com/en/videos/

• This reply was modified 7 years, 11 months ago by Mbydeen.

[Mbydeen]

Mbydeen

26. Januar 2017 at 13:35 #26327

Hello Svenmeeuwissen,

You can easily turn your RPI into an accesspoint for other WiFi-devices, Have you tried our access point plugin:

https://www.max2play.com/en/portfolio/plugin-access-point-2/

Once installed the plugin an new WiFi network created by this device enables other devices to access its features and services. It also shares the internet connection if available and forwards all traffic to the LAN-network,as long as the accesspoint is installed, you cannot connect to other WiFi-networks with this device.

[Mbydeen]

Mbydeen

26. Januar 2017 at 13:02 #26325

Hello apenoot,

when the squeezbox server is installed for the first time, it needs the permission to read/write on specific paths within the SD card, Moreover, we dont reccomend you to split the boot files from the other files, since some libraries will lose the connections to specific files within the image.

[Mbydeen]

Mbydeen

24. Januar 2017 at 17:58 #26283

Hello asplundj,

iceweasel browser provide the support to play videos using google play or youtube.

[Mbydeen]

Mbydeen

24. Januar 2017 at 17:35 #26282

Hi geoff,

Buying different SD card could impact the booting speed of Max2Play. Moreover, the decision of buying specific SD card rather than others, depends on what plugins and application you would like to run on yours Pis, and buying the cheaper options could impact the performance:

Please check the following link:
http://elinux.org/RPi_SD_cards#SD_card_performance

And we suggest also have a look at our SD Cards from our shop as the recommended option:

https://shop.max2play.com/en/sd-karten-emmc-module.html

[Mbydeen]

Mbydeen

24. Januar 2017 at 16:19 #26271

Hello insomniac
Please try to connect to your Pi via your router, and then you can access it by clicking on the IP of the raspberry Pi in order to open the web interface, if it does not work, it could be a problem within the image itself, what is the tool that you used to burn the image?

We recommend you to use the Win32Disk-Imager, more details about preparing the image you can find on our website:
https://www.max2play.com/en/getting-started/
https://www.max2play.com/en/wiki/
https://www.max2play.com/wiki/burning-the-image-onto-memory-card/

• This reply was modified 7 years, 11 months ago by Mbydeen.