Mbydeen

Forum Replies Created

Viewing 30 posts - 271 through 300 (of 309 total)
  • Posted in:
  • 13. Februar 2017 at 16:32 #26902

    Dear kly86,

    We would like to confirm what Std posted.

    Max2Play is a community project and with every license you buy, you contribute to its further development and to provide high quality of technical support.

    Best Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 8 months ago by Mbydeen.
    13. Februar 2017 at 16:28 #26901

    Dear randyMC,

    Thank you to post it on the projects section.We will try to help you to develop this project.

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 16:12 #26898

    @ Udo70

    Could you please give us more details, you cant access the squeezebox server web interface ? and how did you check that its running ?
    what is the port that you are using to access the SBS ?

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 15:56 #26896

    Dear arnaju,

    Thank you for your information.

    The Default port for the CLI (command line interface on LMS) is 9090. and the port for Squeezebox Server Web administration interface is 9000.

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 15:36 #26894

    Dear phamd4,

    Thank you !!

    Its good to know that your problem has been solved 🙂

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 15:25 #26892

    Dear ferry58,

    Typo could make problem like the you faced, Its good to know that your problem has been solved 🙂

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 15:19 #26891

    Dear t0m,

    Please could you clarify more your setup, and where you exactly you select the PC, and where the error appears ?

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 14:55 #26882

    Hello neil,

    Have you checked the OLED connectors, please make sure to clean the connectors of the display and try to connect it again, if it does not work. it could be a hardware defect.

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 13:41 #26874

    Dear wenkman,

    Please have a look at this webpage:

    https://www.max2play.com/en/wiki/using-the-plugin-printserver/

    You also could try to uninstall and install the plugin again.

    Best Regards,
    Mohammad Mbydeen

    13. Februar 2017 at 13:18 #26872

    Dear apakett,

    We will consider to add this feature to your display plugin, but also you can have a look at this source:

    http://raspberrypi.stackexchange.com/questions/46225/adjusting-the-brightness-of-the-official-touchscreen-display

    Best Regards,
    Mohammad Mbydeen

    9. Februar 2017 at 13:11 #26778

    Dear muhackl,

    Sorry, but we dont support Allo Sparky at the moment, we only support Raspberry pi.

    Best Regards,
    Mohammad Mbydeen

    9. Februar 2017 at 12:49 #26776

    Dear TJH,

    Good to know that, we will close this topic and mark it as solved, and we will try to help you to find the best Android print app.

    Best Regards,
    Mohammad

    8. Februar 2017 at 19:29 #26763

    Dear eriche,

    You are right, the port number is 9090.

    At the moment we could provide these solutions to you in order to implement the crossfade effect, we will keep you updated once we have more solutions or workaround.

    Best Regards,
    Mohammad Mbydeen

    8. Februar 2017 at 15:58 #26760

    Dear vandekennedylaan,

    Sorry for the late response, but please update m2p image to the leatest version which is 2.41 to fix the subwoofer sliders.

    Best Regards,
    Mohammad Mbydeen

    8. Februar 2017 at 13:36 #26756

    Hello eriche,

    We will try to help you to configure the crossfade, but try to take a look on this resourse first:

    http://forums.slimdevices.com/showthread.php?97046-Announce-Squeezelite-a-small-headless-squeezeplay-emulator-for-linux-(alsa-only)/page37

    Also you can use this commands via Telnet:

    echo „play 10“ | telnet max2play 9090
    echo „sleep 10“ | telnet max2play 9090

    for more info please see:

    http://max2play:9000/html/docs/help.html

    Best Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 9 months ago by Mbydeen.
    • This reply was modified 7 years, 9 months ago by Mbydeen.
    8. Februar 2017 at 13:06 #26753

    Hello muhackl,

    At the moment the woofer volume could only be adjusted via the volume slider in the “Allo” plugin page, moreover PianoDAC with Subwoofer needs a custom Kernel to run and make sure that you install it and then reboot the system, it should not appear for the second time, after you install the Allo plugin, you can find the configuration files in this path /lib/firmware/allo/2.1

    Regards,
    Mohammad Mbydeen

    8. Februar 2017 at 11:33 #26749

    Hello piwkok,

    The pi should be connected to the network in order to access the web-interface from other device, or you can access it by Installing Iceweasel and connect the pi to display, keyboard and mouse and then open the browser and use the web-interface.

    Regards,
    Mohammad Mbydeen

    7. Februar 2017 at 22:34 #26745

    Hello eriche,

    We are happy that your problem has been resolved, I will mention these links for the record and for other members on the forum that want to apply the same configuration:

    https://support.hifiberry.com/hc/en-us/articles/207397665-Mixing-different-audio-sources

    https://www.max2play.com/en/forums/topic/logilink-7-1-configuration-on-latest-234-jessie-image/

    Best Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 9 months ago by Mbydeen.
    7. Februar 2017 at 15:00 #26725

    Dear Ulle64,

    Please note that Kodi and Squeezelite can not be run simultaneously, since the HiFiBerry Amp+ sound card could receive one input at the time.

    Best Regards,
    Mohammad Mbydeen

    7. Februar 2017 at 14:42 #26722

    Hello eriche,

    Sorry,we could not provide a ‚tailor made solution‘ for you at the moment to use the same sound card to play sound from different sources, but what you could try is to configure the ‚multi-channeling‘ on the sound card, please take a look on those resources:

    https://support.hifiberry.com/hc/en-us/articles/207397665-Mixing-different-audio-sources

    https://www.max2play.com/en/forums/topic/logilink-7-1-configuration-on-latest-234-jessie-image/

    Best Regards,
    Mohammad Mbydeen

    7. Februar 2017 at 13:04 #26718

    Dear eriche,

    Please note that squeezelite player is a passive agent for squeezebox server, and it uses only one output, pelase tell us more about your setup and why you really want to use two instances of players 🙂

    Is this question is related to this post:

    https://www.max2play.com/en/forums/topic/fade-in-out-script/

    About “automatic Audio Switch” ,you can find by clicking on Audioplayer page then Shairport, then you will find it below the command line.

    Best Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 9 months ago by Mbydeen.
    • This reply was modified 7 years, 9 months ago by Mbydeen.
    7. Februar 2017 at 12:40 #26716

    Dear randyMC,

    Thank you for your post.

    We want to mention again that we dont provide any support for pHat, but we will do our best to help in order to implementing this project.

    Best Regards,
    Mohammad Mbydeen

    6. Februar 2017 at 17:00 #26697

    Dear eriche,

    if you are using squeezelite and airplay as players, the solution would be as follows:

    1. Leave the Command Line Options empty for the squeezelite player on the audioplyer page.
    2. Put the IP of the raspberry pi in Shairport/Squeezelite automatic Audio-Switch for Shairport(Airplay).
    3. To get good sound quality, configure the Settings for Master Volume in the card page to the max, then control the sound from the players.

    Best Regards,
    Mohammad Mbydeen

    6. Februar 2017 at 15:29 #26694

    Dear randyMC,

    Please note that we do not support pisupply paPIrus pHat and LiFePO4wered/Pi – shield at the moment. Please post your quesion on Max2Play Projects and Builds Forum:

    https://www.max2play.com/en/forums/forum/max2play-projects-and-builds/

    and we will do our best to help in order to develop this project.

    Best Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 9 months ago by Mbydeen.
    6. Februar 2017 at 14:38 #26692

    Hello eriche,

    Are using only the default audio output on the raspberry pi, or do you have an external sound card, and if you have, what is the brand ?

    you can solve this problem by using this command in the squeezelite advanced settings:

    -C <timeout> Close output device when idle after timeout seconds, default is to keep it open while player is ‘on’

    Please take a look on this page for more details:

    https://www.max2play.com/en/wiki/command-line-options-for-squeezelite/

    also there is Lowpassfilter and Crossfeed Level Adjuster for Headphones.This is a filter for audiophile usage to change lowpass filter cut frequency and crossfeed level of the audio-output. These settings take effect when using the output „-o headphones“ in advanced settings of Squeezelite. More infos about the filter technique can be found on http://bs2b.sourceforge.net/

    Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 9 months ago by Mbydeen.
    6. Februar 2017 at 13:18 #26691

    Dear nonchalant,

    We still have the iqaudio + touch screen bundle in the stock, and if you order it in about a month it will be available .you can take a look on our this page to know the dimensions of the case:

    https://shop.max2play.com/en/gehause-case-fur-7-raspberry-pi-display-mit-raspberry-pi-und-iqaudio-soundkarte.html

    and if you are interested to know how to assemble the case, please check the following link:

    https://www.max2play.com/en/7-inch-touch-display-case-for-iqaudio-dac-digiamp/

    Best Regards,
    Mohammad Mbydeen

    5. Februar 2017 at 14:57 #26684

    Hello StrangerIV,

    Sorry,we only could provide support for Raspberry Pi touch screens. you could check our shop for raspberry pi displays to have the full technical support from our team:

    https://shop.max2play.com/en/accessories/displays.html

    Best Regards,
    Mohammad Mbydeen

    2. Februar 2017 at 14:26 #26570

    Dear TimHoward,

    Here is some resources that could help to implement it:

    Shutdownbutton for Audiophonics Max2Play Setup:
    https://github.com/dhrone/Raspdac-Display/blob/master/pwrbutton_max2play.c

    LMS on/off to signal amplifiers on/off:
    https://www.raspberrypi.org/forums/viewtopic.php?f=35&t=41457

    Infra-red remote controlling LMS on RPi:
    http://dabdig.blogspot.de/2014/08/infra-red-remote-controlling-lms-on-rpi.html

    Best Regards,
    Mohammad Mbydeen

    1. Februar 2017 at 15:51 #26535

    Hello julandco,

    With all the sounds cards that we offer along with RPIs, we recommend our customers to choose the second option, which is Sysdefault to get the highest quality.

    You could also connect the volume control for Squeezelite directly to your sound card by adding -o hw:0 -V Digital to the command line options of Squeezelite in its Advanced Settings menu you find in the Audioplayer tab.

    for more information, please have a look at this link:

    https://www.max2play.com/en/wiki/optimizing-squeezelites-volume-control/

    Regards,
    Mohammad

    31. Januar 2017 at 15:28 #26508

    Dear TJH,

    You can try one of these options when you want to add the printer to Windows:

    1.On the Windows computer, open Windows Explorer and go to the „Network“ item. There’s an icon for the Raspbeery pi ; open it. There’s an icon for the printer shared from the CUPs. Right-click that one and select „Connect…“.

    2.On the Windows computer, select „Add new printer“ then „Connect to a printer on the Internet or network“ and specify the full path of „http://{Playername}:631/printers/{printername}“

    For the Android phone: maybe you can try to use another app.

    Best Regards,
    Mohammad Mbydeen

Viewing 30 posts - 271 through 300 (of 309 total)