Mbydeen

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 309 total)
1 2 3 … 9 10 11
  • Back to forum
    Posted in: Allo USB Bundle
  • Mbydeen
    23. Mai 2017 at 13:34 #29030

    Hi spouti89.

    Firstly, its recommened to use one Squeezebox Server (LMS) in your setup. it would be better to have one LMS and multiple players that could be synchronise using the LMS web-interface. Moreover, in order to enable LMS to use the Airplay devices, you can install Shairtunes2 plugin from Install special Plugins for Squeezebox Server on the Squeezebox Server plugin webpage.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    23. Mai 2017 at 12:23 #29029

    Hi bumpy7,

    Max2Play is developed based on Raspbian OS.Therefore, Max2Play supports multi-threading. You can improve the performance of LMS, by clicking on settings–> Advanced–> Performance. Please have a look at the below pic:

    LMS

    and you can try to configure those settings as follows:

    Database Memory Config —> High (recommended for machines with 1+ GB RAM)

    Trigger Scan on Preference Changes —> Prompt to scan, but dont trigger it automatically

    Artwork Pre-caching —> Pre-cache album, photo and video artwork

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    23. Mai 2017 at 10:17 #29020

    Hi Matt,

    What I have understood form your question that you are trying to play music from iPhone/iPad to your Max2Play device, That could done easily by enabling Shairport (Airplay)on the audioplayer page, and then enable Airplay on your iPhone/iPad.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    22. Mai 2017 at 11:39 #28992

    Hi mrfunk,

    You may need to rest Jivelite settings, please have a look on the below thread:

    https://www.max2play.com/en/forums/topic/visualisations-in-jivelite/#post-20905

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    22. Mai 2017 at 11:33 #28991

    Hi Tom,

    We will send you a new rotary encoder, and you dont have to send the old one back.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    22. Mai 2017 at 10:28 #28976

    Hi markrs,

    Please have a look on the following wiki:

    https://www.max2play.com/en/wiki/kodixbmc/

    And you can send us the debug information, you can find it on the bottom of Kodi page.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    22. Mai 2017 at 10:03 #28974

    Hello Jliggio,

    For sure you have to select the audio output „soundcard“ form the advanced settings for squeezelite audio player in order to have an audio output form the IQaudIO card.

    We are happy that you have figured it out and solve it 🙂 And we are here to help, therefore please dont hesitate to post your questions on this forum.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 14:49 #28926

    Hi anotbot,

    Have you checked the Samba Share settings ? I can see this error in the log:

    Slim::Player::Protocols::File::open (102) Error: could not open /media/usb/Music/Compilations/Five Hand Reel _ For A’ That _ Earl O’Moray/2-17 Freedom Come-All-Ye.m4a: No such file or directory

    Please recheck this directory again in the LMS and Samba Share.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 12:40 #28915

    Hi mrfunk,

    Have you enabled the Visualizer and VU-Meter in Jivelite by adding „-v“ to the command line options of Squeezelite (Audioplayer tab of Max2Play-Webinterface -> Advanced Settings) ?

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 12:30 #28913

    HI AWeiden

    Could you please send us the debug information from KODI webpage ?

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 12:18 #28911

    Hi jliggio,

    Have you tried to Disable Build-In-Audio on the Raspberry settings ?. It will remove HDMI/Headphone Jack and put IQAudIO on position 0.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 12:07 #28908

    Hi bumpy7,

    How have you connected the external storage/Hard-disk ? Does this storage take the power from the RPI ? We recommend you to use separate power supply for the storage, it could be that the storage does not get enough power supply, which could affect the performance.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 11:53 #28907

    Hi anotbot,

    You can check the port number form the web-interface of LMS, but try to add the Server without the port like this -s macpro.local . unfortunately we could not provide a technical support for the LMS on Apple Mac. However, you can post your question on the slim devices forum:

    http://forums.slimdevices.com/index.php

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 10:57 #28900

    Hi Tecuma,

    You can find the debug info by clicking on DEBUG Information, and copy it and then past it in your next reply, you can check the below screenshot:

    debug

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    18. Mai 2017 at 10:43 #28897

    Hi Tom,

    Please note that we have tested the rotary encoder for IQAudIO and its working well. Regarding to the Mute button, you have to add -X [gpio_button] in the Sqeezelite commandline, maybe you can try to use another rotary encoder, it could be a hardware malfunction.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    17. Mai 2017 at 14:37 #28886

    Hi Tom,

    The Hardware and software settings are right. But could you please describe how the volume control is still not working ? Is there no any sound output ? and is the rotary Encoder Software running with Process ID on the IQaudio plugin ?

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    17. Mai 2017 at 11:20 #28882

    Hi anotbot,

    I think this behaviour could be because you have multiple Squeezebox servers, we recommend you to have one LMS in the setup. Moreover, please try to add -s [server][:port] in the command line to connect to specified server, otherwise the squeezelite will use autodiscovery to find server.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    17. Mai 2017 at 10:39 #28879

    Hi perlut,

    As anesthesia said, you have to install the Hifiberry plugin, you can find it on this link:

    https://www.max2play.com/en/portfolio/plugin-hifiberry-2/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    16. Mai 2017 at 13:35 #28874

    Hi all,

    Have you tried to add -s [server] [:port] in the commandline settings of Squeezelite Audio player page ?, this command is used to Connect to specified server, otherwise it will use autodiscovery to find the server.And we recommend you to use only ONE LMS in the setup.

    Could you please send us the debug info for each Squeezelite and Squeezebox server, you can find it on the bottom of the web-interface page.

    Best Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 5 months ago by Mbydeen.
    Mbydeen
    16. Mai 2017 at 10:16 #28872

    Hi ParbeWipar,

    Good to know that your problem has been solved. If you have further questions, you are very welcomed to post it on the forum.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Mai 2017 at 14:19 #28861

    Hi ParbeWipar,

    Please could you send us the debug info on the Audioplayer webpage ? you can find it on the bottom of the page.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Mai 2017 at 13:41 #28850

    Hello atmfrank,

    Thank you for your post.

    Please make sure that you have the latest version of Max2Play, if not please download and burn new image.

    For the first issue, please try to Follow the bellow steps:

    1. Please try to download the latest official version of LMS, which is Logitech Media Server v7.9, and reinstall LMS.
    2. if the the problem has not been solved, we recommend you to post this question on the SlimDevices forum :http://forums.slimdevices.com

    Regarding the second issue, please follow the below steps:

    1. You do not have any plugin in the LMS that converts the audio file format.
    2. Make sure you are using the default settings in the audioplayer webpage, you can check the bitrate from the debug section in audioplayer page.

    When you are using the HDMI, the audio sample rate is limited to max 48 KHz. You can check the following website for testing:

    http://www.2l.no/hires/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Mai 2017 at 12:36 #28845

    Hi Tecuma,

    How have you activated the web interface form Kodi ? or do you mean that you have activated KODI using the web interface ?

    Could you send us the debug info from the KODI webpage ?

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Mai 2017 at 11:53 #28843

    Hi jliggio,

    Have you followed these steps to assemble the Raspberry Pi 7inch Touch Display Bundle:

    https://www.max2play.com/en/7-inch-touch-display-case-for-iqaudio-dac-digiamp/

    Please send us the debug info on the Audioplayer page.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Mai 2017 at 11:37 #28842

    Hi eriche,

    Unfortunately, you do not provide technical support for suptronics extension boards.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    15. Mai 2017 at 11:17 #28840

    Hi Tom,

    Try to connect the green cable to the GPIO 22 (pin 2) and the red cable to the ground (pin 10), and see if this will solve the problem or not 🙂

    Regards,
    Mohammad Mbydeen

    • This reply was modified 7 years, 5 months ago by Mbydeen.
    Mbydeen
    12. Mai 2017 at 11:55 #28810

    Hi Tom,

    According to the picture that you sent, you have the wrong wiring, The GPIO 23 and 24 are used for the rotary encoder. And you can use the GPIO 22 and 25 for the button. Regarding to the ground you should connect it to 0V GPIO, please have a look at the below diagram:

    IQ1
    q2

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    12. Mai 2017 at 10:52 #28804

    Hi all,

    Could you please be more specific, which Max2Play version are you using ? Which pi are you using ? what is the network configuration ?

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    11. Mai 2017 at 14:38 #28795

    Hi kiko95,

    We are happy that you are enjoying Max2Play. We will consider a lifetime license, but at the moment the license its up to 5 years.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    11. Mai 2017 at 14:26 #28793

    Hello mtk,

    Thank for your contribution to the forum, and we hope that we could find a common ground for cooperation with you to work on Max2Play related projects in the future.

    Best Regards,
    Mohammad Mbydeen

Viewing 30 posts - 1 through 30 (of 309 total)
1 2 3 … 9 10 11