MarioM

Forum Replies Created

Viewing 12 posts - 1,111 through 1,122 (of 1,122 total)
1 2 3 … 36 37 38
  • Back to forum
    Posted in:
  • MarioM Moderator
    5. November 2019 at 16:04 #47471

    Hi Dunewar,

    Sounds like the problem could be caused by your SD card. Have you tried using another SD card for your Max2Play image? Do you have the possibility to use another Raspberry Pi for testing?

    MarioM Moderator
    5. November 2019 at 15:57 #47470

    Hi gavinsweet,

    Could you please tell me more about what hardware you used? Especially the power supply could be decisive. Otherwise it seems that your display is simply broken. Yet, I am not aware of a case in which the display does not work after some time. But wear of electronic components after a few years can never be ruled out.

    MarioM Moderator
    16. Oktober 2019 at 12:00 #47309

    Hallo Ti-ejtsch,

    Taucht der Pfad unter „Netzwerkgeräte anzeigen“ auf und lässt sich darüber hinzufügen?
    Evtl. hat der Stick von der Fritzbox eine gesonderte IP-Adresse bekommen, z.b. //192.168.178.254
    Ansonsten könntest du noch versuchen die Bindestriche bei „Fritz-NAS“ durch Punkte zu ersetzen bzw. statt der IP-Adresse „fritz.box“ zu benutzen.

    MarioM Moderator
    17. September 2019 at 13:02 #47101

    Hallo chrimoe,

    Meines Wissens nach ist eine simultane Ausgabe von DSI und HDMI auch auf dem Raspberry Pi 4B nicht möglich. Der 4B besitzt jedoch zwei micro-HDMI Ausgänge zum gleichzeitigen Nutzen von zwei Bildschirmen.

    Um das Videosignal auf den HDMI Port zu lenken, kannst du das Max2Play Plugin RPI Display nutzen. Dort gibt es den Menüpunkt „LCD als vorgegebenes Display“, welcher standardmäßig ausgewählt ist. Entfernst du den Haken, speicherst und startest dein System neu, sollte die HDMI Ausgabe funktionieren. Falls du später wieder den Touchscreen nutzen möchtest, musst du lediglich den Haken wieder setzen.

    MarioM Moderator
    17. September 2019 at 12:08 #47100

    Hallo kosmonaut,

    Sie könnten versuchen, mithilfe eines Toslink-Verteilers sowohl den Fernseher als auch den Digi+ Pro per Toslink mit der Soundbar zu verbinden. Bei einigen dieser Toslink-Verteiler lassen sich die Eingänge mit einer IR-Fernbedienung umschalten. So würden Sie das Herausziehen des Kabels umgehen und könnten per Knopfdruck zwischen TV-Ton und dem Digi+ Pro als Quelle wechseln.

    MarioM Moderator
    27. Mai 2019 at 16:29 #45491

    Hi Alex,

    This should be no problem since you can synchronize your Players in the Squeezebox Server.

    You can do this from the web interface in the upper right corner or from a Squeezebox App like Squeezer or iPeng.

    • This reply was modified 5 years, 7 months ago by MarioM.
    MarioM Moderator
    27. Mai 2019 at 15:50 #45490

    Hi kanetoad,

    You may follow these steps to reactivate your license:

    1. Make sure your Max2Play device is connected to the internet.
    2. Delete the license in the Max2Play interface and click „save“ with a blank field.
    3. Click on „Settings/Reboot“ again, reenter your license and click „save“.
    4. Check if the green „Activated“ field appears. If not, contact us again for further help.

    Make sure you use the same mail address as in your forum profile.
    We also have a short wiki article covering all aspects of the activation process.

    MarioM Moderator
    27. Mai 2019 at 13:38 #45489

    Hi tomsat,

    There is a premium plugin called SD Card Write Protection for this very use case.

    MarioM Moderator
    24. Mai 2019 at 13:58 #45483

    Hi Alex,

    Are you using an older image/version of Max2Play? If so, you should try updating to the latest version 2.48. This should fix the problem.

    MarioM Moderator
    24. Mai 2019 at 12:45 #45482

    Hi Hans,

    The 2.8″ display should work with the Pi Zero.

    Have you downloaded the RPi Display plugin and installed the 2.8″ display from the dropdown menu?

    MarioM Moderator
    24. Mai 2019 at 11:55 #45481

    Hi nickgosling,

    For now, the graphic equalizer only works when using plugequal in the sound card options of squeezelite. It is based on an internal mixer (software). Do not use the equalizer for high-quality music, as it works with a lower resolution than the sound card.
    If you still want to use it, have you tried leaving the command line option empty? Have you tried to enable the „Disable Built-In Audio“
    checkbox on the Raspberry Settings page?

    Please note that the equalizer currently does not work with Hardware Control.

    When using the U5 area of the JustBoom card for the play/pause button and the IR receiver, the two get in each others way.
    Please use only one of them. Otherwise, in addition to the signals of the rotary encoder completely diffuse signals from the IR receiver enter the System.

    MarioM Moderator
    30. April 2019 at 14:47 #45188

    Hello three_jeeps,

    usually shares on Windows machines use SMB (or CIFS). NFS is primarily intended for Linux systems. Therefore, if you intend to use NFS, please rely on the syntax given under „show help“ (left blue button). Otherwise, try switching to CIFS. In this case you’ll need to enter username and password for your share in the options field (besides „sec=ntlm“ and the SMB version).

    You can find a short step-by-step-guide on this topic at our wiki.

    Without an active license it always displays „not activated“. Therefore only the basic functions of Max2Play are available to you (which has no impact on your current project, if you don’t need additional plugins by now). Only with an active (premium-)license it changes to „activated“ and new functions get unlocked.

    • This reply was modified 5 years, 7 months ago by MarioM.
Viewing 12 posts - 1,111 through 1,122 (of 1,122 total)
1 2 3 … 36 37 38