kuky

Forum Replies Created

Viewing 19 posts - 1 through 19 (of 19 total)
  • Back to forum
    Posted in: Allo USB Bundle
  • kuky premium
    29. Juni 2020 at 21:46 #49108

    Tried to upgrade wheezy to jessie – now is dead cannot log in – it is/ was only available tru ssh or web –
    Looks like i have to make a trip and find it and connect a monitor and see what’s going on..etc
    It is an rpi2
    which image you recommend to install – If i need to do a fresh one?
    Thanks

    kuky premium
    29. Juni 2020 at 15:53 #49107

    HI – I tried again today and it worked
    I have old stuff 🙂 – „Raspbian GNU/Linux 8 (jessie)“
    I’ll try on next one
    oops – So i have to install a new image? …hmm not easily accessible .but possible
    Or there is a script I can download and run ?
    Thanks

    „Raspbian GNU/Linux 7 (wheezy)“
    Not working

    sed: can’t read /etc/systemd/system.conf: No such file or directory
    Get Plugin from https://shop.max2play.com/media/downloadable/currentversion/hifiberry.tar
    Load Plugin from tar
    –2020-06-29 09:48:28– https://shop.max2play.com/media/downloadable/currentversion/hifiberry.tar
    Resolving shop.max2play.com (shop.max2play.com)… 172.67.133.153, 104.28.28.89, 104.28.29.89, …
    Connecting to shop.max2play.com (shop.max2play.com)|172.67.133.153|:443… connected.
    GnuTLS: A TLS fatal alert has been received.
    Unable to establish SSL connection.
    tar: This does not look like a tar archive
    tar: Exiting with failure status due to previous errors
    Installing Plugin
    Controller OR View Files are missing in the Plugin – Install canceled
    Copy custom header files hifiberry
    grep: /lib/systemd/system/networking.service.d/network-pre.conf: No such file or directory

    kuky premium
    18. Juni 2020 at 20:31 #49052

    Having similar problem – cannot update 2 of my Rpi2
    It shows 2.51 after reboot too
    here is the log
    Click here to show detailed information
    Get Data
    Install Webinterface
    Archive: /opt/max2play/cache/webinterface.zip
    Install Scripts
    Archive: /opt/max2play/cache/scripts.zip
    rm: cannot remove `/etc/init/whoopsie.conf‘: No such file or directory
    rm: cannot remove `/etc/rsyslog.d/50-default.conf‘: No such file or directory
    crontab: user `odroid‘ unknown
    crontab: user `odroid‘ unknown
    Factory Settings available
    OK
    sed: can’t read /etc/systemd/system.conf: No such file or directory
    Get Plugin from https://shop.max2play.com/media/downloadable/currentversion/hifiberry.tar
    Load Plugin from tar
    –2020-06-18 14:14:58– https://shop.max2play.com/media/downloadable/currentversion/hifiberry.tar
    Resolving shop.max2play.com (shop.max2play.com)… 172.67.133.153, 104.28.29.89, 104.28.28.89, …
    Connecting to shop.max2play.com (shop.max2play.com)|172.67.133.153|:443… connected.
    GnuTLS: A TLS fatal alert has been received.
    Unable to establish SSL connection.
    tar: This does not look like a tar archive
    tar: Exiting with failure status due to previous errors
    Installing Plugin
    Controller OR View Files are missing in the Plugin – Install canceled
    Copy custom header files hifiberry
    grep: /lib/systemd/system/networking.service.d/network-pre.conf: No such file or directory

    UPDATE NOT SUCCESSFUL

    kuky premium
    26. Dezember 2019 at 18:35 #47833

    Have the same problem, I think. I have HiFiBerry + on RPi2 Max2Play and – SqueezePlay player on Win10 which plays the TTS but none of the Squeezelite on Max2play installs are playing the TTS from the URL sent. I downloaded the file in LMS music folder and it plays fine on squeezelite/max2play- so is NOT as I saw on some forums a too short mp3 file or sampling rate not supported. Some are saying something about https – cannot find it right now – Any suggestions? – I did look on a lot of posts but so far no luck.

    kuky premium
    5. November 2018 at 19:45 #41837

    Hi
    Nice – It worked‘
    thx

    kuky premium
    5. November 2018 at 16:06 #41831

    As abvove, cannot install openhab and have same err
    WARNING: The following packages cannot be authenticated!
    libassuan0 libksba8 libpth20 dirmngr
    As i said, i installed the “ Touch image not the stretch

    kuky premium
    4. November 2018 at 18:40 #41815

    Hi Having the same problem( no openhab server installed) with fresh install of Max2Play for 7″ Touch Display “
    but it is based on Jessie
    #### KERNEL ####
    Linux max2play 4.4.14-v7+ #895 SMP Sun Jun 26 13:59:02 BST 2016 armv7l GNU/Linux
    #### LINUX-VERSION ####
    Distributor ID: Raspbian
    Description: Raspbian GNU/Linux 8.0 (jessie)
    Release: 8.0
    Codename: jessie

    If i install the Stretch ver how do i get the 7″ in touch to work?
    or it will just work?
    Thanks-

    kuky premium
    19. März 2016 at 23:21 #19378

    Of Course but never had to
    By default is enabled on most of Linux flavours
    I usually had to do the other way around
    Disable root ssh in

    kuky premium
    19. März 2016 at 22:38 #19374

    Something else going on
    Did it many times with no problems
    Did you try ssh in as root?
    Did you change anything else?

    kuky premium
    19. März 2016 at 21:56 #19371

    ssh in as pi
    sudo passwd root
    Enter whatever passwd u want
    Then wscp as root

    kuky premium
    9. März 2016 at 19:34 #19181

    … and the new Raspbian release is, of course, still compatible with all previous Raspberry Pi models

    kuky premium
    9. März 2016 at 19:31 #19180

    I installed many times max2play on Rpi2 with raspbian jessie (not only) already installed and customized for my needs — for different tests I did
    Just use the ’script“ – it may take a while but it does the job with no problems .. so far 😉

    The "install_max2play.sh" script easy to do.

    kuky premium
    7. März 2016 at 18:20 #19162

    yes after I discovered another post in forums – took me a while to find the forums – No idea it was Under help menu
    and did post my tests there

    Compatibility with Raspberry PI 3

    kuky premium
    5. März 2016 at 20:21 #19135

    Enabled and installed Rpi camera
    Similar errors as I mentioned above using latest Raspbian download and max2play install script
    —
    Setting up zip (3.0-8) …
    Processing triggers for libc-bin (2.19-18+deb8u3) …
    Processing triggers for systemd (215-17+deb8u3) …
    grep: ./config.txt: No such file or directory
    cp: cannot create regular file ‚/etc/apache2/conf.d/other-vhosts-access-log‘: No such file or directory
    chmod: cannot access ‚/etc/apache2/conf.d/other-vhosts-access-log‘: No such file or directory
    —

    However Now camera works and I get the video streaming on port 90
    Cool!

    kuky premium
    5. März 2016 at 19:47 #19132

    Kodi – wow! very snappy
    ( I didn’t try it since a while ago on Rpi B – unusable then)
    ha! I see a Kodi start in JiveLite – cool Blocks JL until Kodi exits – similar with what i need
    Works with NO issues from Rpi 3 and from Web max2play Control
    Super

    kuky premium
    5. März 2016 at 19:33 #19131

    Max2Play beta image loaded
    Installed lightdm since I need the pi to open in GUI
    Tried JiveLite – it works
    However I’m having a problem with how it work s- probably nothing to do with beta or RPi3
    If Desktop Boot option auto log in as pi is selected in raspi-config and auto start JiveLite ion Max2play Jivelite settings
    neither desktop or JiveLite shows on the screen
    Jivelite is running – I checked but no Desktop on main
    However switching desktops it does show – 2 of them!
    Closed one of them ( taskbar visible) then switched back and forth between deskptops
    quit Jivelite – none running
    Tried to restart from web interface from another computer
    Trying to launch … NOT successful Click here to show detailed information
    JiveLite 0.1.0
    Invalid MIT-MAGIC-COOKIE-1 keyInvalid MIT-MAGIC-COOKIE-1 key20160305 17:18:56.121 INFO jivelite – JiveMain.lua:267 JiveLite version 0.1.0
    20160305 17:18:56.131 ERROR jivelite.ui.draw – jiveL_initSDL:204 SDL_Init(V|T|A): Unable to open a console terminal
    

    – Removed in raspi-config autostart as pi in Desktop
    left autostart on Jivelite and reboot
    JiveLite starts and display on current desktop
    Quit from Jivelite menu button still not working
    Quit from taskbar x works leaving the desktop up but
    Quitting ( Stop JiveLite) form web gui quits the desktop
    I cannot win!!! 🙁
    What i need is JiveLiet on the screen with NO taskbar, quitable from his own Quit button or sending a command to another program, bringing that program in foreground and show back up when the ‚other ‚ program is done
    Example
    I have camera with Motion detector or Door bell Ring event( some event detected by a background program) which triggers the Video image to show on the screen.
    I really lie JiveLite/LMS combo an don’t feel like looking for alternative
    Can it been done? – maybe I s’d post all this part in a separate one 😉

    Checking camera and kodi next

    kuky premium
    5. März 2016 at 17:56 #19130

    Downloading Beta image
    Let you know how it works

    kuky premium
    5. März 2016 at 17:41 #19129

    Just Tried the Rpi Camera ( never tried before)
    I have an „official“ Pi NoIR camera
    Plugged it in
    Added the extension on Max2Play
    Installed the Rpi Camera
    Except that /etc/pache2/conf.d error ( file does not exist) no other errors
    Installation Successful
    I had a look
    Actually the folder conf.d does NOt exist
    here the content on
    cd /etc/apache2/
    pi@rpi3:/etc/apache2 $ ls -l
    total 80
    -rw-r–r– 1 root root 7116 Mar 4 22:10 apache2.conf
    drwxr-xr-x 2 root root 4096 Mar 4 22:08 conf-available
    drwxr-xr-x 2 root root 4096 Mar 4 22:08 conf-enabled
    -rw-r–r– 1 root root 1782 Oct 24 04:37 envvars
    -rw-r–r– 1 root root 31063 Oct 24 04:37 magic
    drwxr-xr-x 2 root root 12288 Mar 4 22:09 mods-available
    drwxr-xr-x 2 root root 4096 Mar 4 22:10 mods-enabled
    -rw-r–r– 1 root root 330 Mar 5 10:24 ports.conf
    drwxr-xr-x 2 root root 4096 Mar 4 22:08 sites-available
    drwxr-xr-x 2 root root 4096 Mar 5 10:24 sites-enabled

    Rpi Camera cannot start
    —–
    RPi-Camera Addon Installer

    Trying to launch … NOT successful Click here to show detailed information
    This account is currently not available.
    This account is currently not available.
    —-

    kuky premium
    5. März 2016 at 17:13 #19128

    Hi
    max2play installs – I used the script on a latest Raspbian ( Rpi 3 Require that) but some components have problems
    Tried 2 so far
    I tried to install both JivelIte and Kodi( Just curious not fan of Kodi)
    Jive installs but cannot start – see another post about this and for Kodi I just tried 5 min ago
    Start Kodi – unsuccessful with no details visible.
    SO I Tried to install it – Unsuccessful too
    Installationspaket: http://cdn.max2play.com/kodi-15.1-wheezy.tar.gz
    Installation startet – This Messages refreshes every 3 seconds to show current status of installation. If finished this message disappears.
    By not providing „Findkodi.cmake“ in CMAKE_MODULE_PATH this project has
    asked CMake to find a package configuration file provided by „kodi“, but
    CMake did not find one.

    Could not find a package configuration file provided by „kodi“ with any of
    the following names:

    kodiConfig.cmake
    kodi-config.cmake

    Add the installation prefix of „kodi“ to CMAKE_PREFIX_PATH or set
    „kodi_DIR“ to a directory containing one of the above files. If „kodi“
    provides a separate development package or SDK, be sure it has been
    installed.

    — Configuring incomplete, errors occurred!
    See also „/opt/kodi-platform/CMakeFiles/CMakeOutput.log“.
    sed: can’t read /opt/kodi-platform/CMakeFiles/kodiplatform.dir/link.txt: No such file or directory
    make: *** No targets specified and no makefile found. Stop.
    Reset Compiler to first version
    There is only one alternative in link group gcc (providing /usr/bin/gcc): /usr/bin/gcc-4.7
    Nothing to configure.
    Click here to reload Page
    finished

    Installation abgeschlossen!

    I can post the CMakeOutput log if anybody wants it

Viewing 19 posts - 1 through 19 (of 19 total)