klem1

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Back to forum
    Posted in: Allo USB Bundle
  • klem1 premium
    8. September 2016 at 12:22 #22930

    IMAGE

    • This reply was modified 8 years, 2 months ago by klem1.
    klem1 premium
    6. September 2016 at 18:18 #22887

    Ok it’s work but i have not the touchscreen

    i follow this tuto -> TUTO

    i reinstall this image : with m2p_rpi3_7zoll_232.img but the touchscreen dont works someone can help me ?

    • This reply was modified 8 years, 2 months ago by klem1.
    • This reply was modified 8 years, 2 months ago by klem1.
    • This reply was modified 8 years, 2 months ago by klem1.
    • This reply was modified 8 years, 2 months ago by klem1.
    klem1 premium
    6. September 2016 at 15:21 #22885

    i try this : in config.txt but its doesnt works

    # set current over USB to 1.2A
max_usb_current=1

# overscan to adjust image position
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0

# HDMI config
hdmi_drive=1
hdmi_ignore_edid=0xa5000080
hdmi_group=2
hdmi_mode=87

# 1024x600 display
hdmi_cvt=1024 600 60 3 0 0 0

    when i plug my display on another raspberry with KODI its doesnt works too but if i plug the display on my HDMI computer i see the screen.

    I think my diplay is not compatible with raspberry or it needs specific parameter

    klem1 premium
    6. September 2016 at 15:13 #22884

    Ok i will try thanks

    klem1 premium
    6. September 2016 at 13:36 #22880

    Can u help Me ?
    I want to connect with SSH to Max2play so i put this :

    Login : Pi
    PW : rapsberry

    then i use this command :

    sudo mount -o remount,rw /boot

    it’s ok but i cant change the config.txt file

    scp: /boot/config.txt: Permission denied

    • This reply was modified 8 years, 2 months ago by klem1.
    klem1 premium
    6. September 2016 at 11:36 #22879

    Yes i will try a normal Image before, but i think i will have a problem with touchscreen drivers … because jivelite have drivers just for less than 7″ display.

    klem1 premium
    6. September 2016 at 10:42 #22876

    So if I understand well Max2Play 7 “ is not compatible with HDMI and I have to find a screen that uses DSI to work

    klem1 premium
    6. September 2016 at 10:38 #22875

    Hello Patrick,

    I understand , but my screen is connected directly to HDMI on my screen via a cable -> IMAGE
    and i think Max2Play works with hdmi because it work even with the TV.

    klem1 premium
    5. September 2016 at 22:30 #22873

    up

    klem1 premium
    4. September 2016 at 18:29 #22863

    someone can help Me ?

    • This reply was modified 8 years, 2 months ago by klem1.
    klem1 premium
    3. September 2016 at 18:18 #22859

    Nobody can help me ?

    klem1 premium
    2. September 2016 at 22:19 #22856

    UP please

    klem1 premium
    1. September 2016 at 17:33 #22832

    -I reinstall the image : m2p_rpi3_7zoll_232.img

    -I expand the system then update

    -french language and activate licence

    Then take this video -> VIDEO

    – now i compile the latest version from Source & reboot and its doesnt work too

    my screen works when I plug the HDMI cable from my computer, and jivelite works because if i plug HDMI cable on my TV i see the picture of jivelite.

    what can i do now ?

    edit :

    I try to Disable „LCD as Default Display“ but it’s doesnt works

    • This reply was modified 8 years, 2 months ago by klem1.
    klem1 premium
    1. September 2016 at 16:02 #22831

    i will try.

    Normally you only need to install the touch display plugin for the 7″ touchscreen. The joggler skin is already preconfigured.

    Yes i know but its doesnt work

    klem1 premium
    1. September 2016 at 14:36 #22824

    help please

Viewing 15 posts - 1 through 15 (of 15 total)