Joris

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • 16. Dezember 2021 at 19:03 #51849

    Hi MarioM,

    Yes! I’ve found that solution as well and this helped me already a great big deal. Thx for pointing me that direction anyway!

    8. August 2018 at 18:33 #36881

    I use my ‚lab‘ powersupply. It should be fine.

    7. August 2018 at 17:22 #36845

    Hi Heiner,

    So after some trying and errors I have now this.

    #### SQUEEZELITE VERSION ####
    Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.
     
    
    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC
     
    
    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpihifiberry -a 80:4:: -o hw:1
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=sndrpihifiberry -t hardware -m hw:1 -c Digital
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi
    YMPD_PARAMETER=--webport 8081
     
    
    #### SQUEEZELITE -l ####
    Output devices:
      null                           - Discard all samples (playback) or generate zero samples (capture)
      equal                         
      plugequal                      - Equalizer for plughw:0,0
      default:CARD=ALSA              - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
      sysdefault:CARD=ALSA           - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
      dmix:CARD=ALSA,DEV=0           - bcm2835 ALSA, bcm2835 ALSA - Direct sample mixing device
      dmix:CARD=ALSA,DEV=1           - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample mixing device
      dsnoop:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Direct sample snooping device
      dsnoop:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample snooping device
      hw:CARD=ALSA,DEV=0             - bcm2835 ALSA, bcm2835 ALSA - Direct hardware device without any conversions
      hw:CARD=ALSA,DEV=1             - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct hardware device without any conversions
      plughw:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Hardware device with all software conversions
      plughw:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Hardware device with all software conversions
      default:CARD=sndrpihifiberry   - snd_rpi_hifiberry_dacplus,  - Default Audio Device
      sysdefault:CARD=sndrpihifiberry - snd_rpi_hifiberry_dacplus,  - Default Audio Device
      dmix:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_dacplus,  - Direct sample mixing device
      dsnoop:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_dacplus,  - Direct sample snooping device
      hw:CARD=sndrpihifiberry,DEV=0  - snd_rpi_hifiberry_dacplus,  - Direct hardware device without any conversions
      plughw:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_dacplus,  - Hardware device with all software conversions
    
     
    
    #### SHAIRPORT (SYNC) VERSION ####
    3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc
     
    
    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed
     
    
    #### OUTPUT SOUND DETAILS CARD 1 ####
    access: MMAP_INTERLEAVED
    format: S32_LE
    subformat: STD
    channels: 2
    rate: 44100 (44100/1)
    period_size: 882
    buffer_size: 3528
     

    Dough, I had to ad:
    – -o hw:1 in command line
    – 80:4:: in ALSA param.

    Unfortunately, still the same weird metallic sounds

    6. August 2018 at 19:24 #36841

    Hi Heiner,

    I hope you mean this:

    #### SQUEEZELITE VERSION ####
    Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.
     
    
    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC
     
    
    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpihifiberry -a 80:4:: -ohw:1,0
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=sndrpihifiberry -t hardware -m hw:1 -c Digital
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi
    YMPD_PARAMETER=--webport 8081
     
    
    #### SQUEEZELITE -l ####
    Output devices:
      null                           - Discard all samples (playback) or generate zero samples (capture)
      equal                         
      plugequal                      - Equalizer for plughw:0,0
      default:CARD=ALSA              - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
      sysdefault:CARD=ALSA           - bcm2835 ALSA, bcm2835 ALSA - Default Audio Device
      dmix:CARD=ALSA,DEV=0           - bcm2835 ALSA, bcm2835 ALSA - Direct sample mixing device
      dmix:CARD=ALSA,DEV=1           - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample mixing device
      dsnoop:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Direct sample snooping device
      dsnoop:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct sample snooping device
      hw:CARD=ALSA,DEV=0             - bcm2835 ALSA, bcm2835 ALSA - Direct hardware device without any conversions
      hw:CARD=ALSA,DEV=1             - bcm2835 ALSA, bcm2835 IEC958/HDMI - Direct hardware device without any conversions
      plughw:CARD=ALSA,DEV=0         - bcm2835 ALSA, bcm2835 ALSA - Hardware device with all software conversions
      plughw:CARD=ALSA,DEV=1         - bcm2835 ALSA, bcm2835 IEC958/HDMI - Hardware device with all software conversions
      default:CARD=sndrpihifiberry   - snd_rpi_hifiberry_dacplus,  - Default Audio Device
      sysdefault:CARD=sndrpihifiberry - snd_rpi_hifiberry_dacplus,  - Default Audio Device
      dmix:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_dacplus,  - Direct sample mixing device
      dsnoop:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_dacplus,  - Direct sample snooping device
      hw:CARD=sndrpihifiberry,DEV=0  - snd_rpi_hifiberry_dacplus,  - Direct hardware device without any conversions
      plughw:CARD=sndrpihifiberry,DEV=0 - snd_rpi_hifiberry_dacplus,  - Hardware device with all software conversions
    
     
    
    #### SHAIRPORT (SYNC) VERSION ####
    3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc
     
    
    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed
     
    
    #### OUTPUT SOUND DETAILS CARD 1 ####
    closed
     
    
    	
    6. August 2018 at 13:53 #36839

    Hi Heiner,

    Same result with the ALSA parameters removed. If I leave them in (the 80:4::) and I remove the command line option, then it works again. But with the same weird audio result. The singer sounds like he’s in a big hall or bathroom or whatever.. 🙂

    6. August 2018 at 13:37 #36837

    Hi Heiner,

    Thx a lot for your help!
    I’ve tried your suggestion (ALSA parameter with „80:4::“ and adding „hw:1“ in command line ) but I get this error:

    Trying to launch ... NOT successful Click here to show detailed information
    
    Error: command line argument error
    
    Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving. See -t for license terms
    Usage: /opt/squeezelite/squeezelite [options]
    -s [:] Connect to specified server, otherwise uses autodiscovery to find server
    -o Specify output device, default "default", - = output to stdout
    -l List output devices
    -a :
    
    ::	Specify ALSA params to open output device, b = buffer time in ms or size in bytes, p = period count or size in bytes, f sample format (16|24|24_3|32), m = use mmap (0|1)
    -a Specify sample format (16|24|32) of output file when using -o - to output samples to stdout (interleaved little endian only)
    -b :	Specify internal Stream and Output buffer sizes in Kbytes
    -c ,	Restrict codecs to those specified, otherwise load all available codecs; known codecs: flac,pcm,mp3,ogg,aac,wma,alac,dsd (mad,mpg for specific mp3 codec)
    -C Close output device when idle after timeout seconds, default is to keep it open while player is 'on'
    -d =	Set logging level, logs: all|slimproto|stream|decode|output|ir, level: info|debug|sdebug
    -G :	Specify the BCM GPIO# to use for Amp Power Relay and if the output should be Active High or Low
    -e ,	Explicitly exclude native support of one or more codecs; known codecs: flac,pcm,mp3,ogg,aac,wma,alac,dsd (mad,mpg for specific mp3 codec)
    -f Write debug to logfile
    -i [] Enable lirc remote control support (lirc config file ~/.lircrc used if filename not specified)
    -m Set mac address, format: ab:cd:ef:12:34:56
    -M Set the squeezelite player model name sent to the server (default: SqueezeLite)
    -n Set the player name
    -N Store player name in filename to allow server defined name changes to be shared between servers (not supported with -n)
    -W Read wave and aiff format from header, ignore server parameters
    -p Set real time priority of output thread (1-99)
    -P Store the process id (PID) in filename
    -r [:] Sample rates supported, allows output to be off when squeezelite is started; rates = |-|,,; delay = optional delay switching rates in ms
    -S Absolute path to script to launch on power commands from LMS
    -R -u [params] Resample, params = ::::::,
    recipe = (v|h|m|l|q)(L|I|M)(s) [E|X], E = exception - resample only if native rate not supported, X = async - resample to max rate for device, otherwise to max sync rate
    flags = num in hex,
    attenuation = attenuation in dB to apply (default is -1db if not explicitly set),
    precision = number of bits precision (NB. HQ = 20. VHQ = 28),
    passband_end = number in percent (0dB pt. bandwidth to preserve. nyquist = 100%),
    stopband_start = number in percent (Aliasing/imaging control. > passband_end),
    phase_response = 0-100 (0 = minimum / 50 = linear / 100 = maximum)
    -D [delay] Output device supports DSD over PCM (DoP), delay = optional delay switching between PCM and DoP in ms
    -v Visualiser support
    -L List volume controls for output device
    -U Unmute ALSA control and set to full volume (not supported with -V)
    -V Use ALSA control for volume adjustment, otherwise use software volume adjustment
    -Q Sync local ALSA volume changes with Squeezebox Server Volume when using -V option
    -B Use to set PowerOn/Off Player on status of connected Bluetooth-Speakers (only for Pulse Audiooutput)
    -I Squeezebox Server CLI Port (optional). Default 9090
    -X Use a GPIO Button to switch between Play and Pause - works well with rotary encoders with button for Volume and Play/Pause
    -z Daemonize
    -Z Report rate to server in helo as the maximum sample rate we can support
    -t License terms
    -? Display this help text
    
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

    Also with HW:0 I get the same. And even an message at the hifiberry page that the soundcard is located at HW:1

    What shall i do now?

Viewing 6 posts - 1 through 6 (of 6 total)