[Jazzfood premium]

Jazzfood premium

3. November 2017 at 13:06 #32272

Hi Heiner,
No I didn’t have the “Open Console Fullscreen” button. After the installation, I still had the “Install SheelInABox” button, as if nothing had been installed. I started Putty and ran dpkg –get-selections | grep „shellinabox“ and it returned nothing. So I guess it did not install…

EDIT 1:
In the meantime, I ran Putty and installed libnet-ssleay-perl and libio-socket-ssl-perl (in order to be able to watch some https podcasts on the LMS) and after that, it seems I was able to get the Remote Control to work!! I am sure the installation of the 2 SSL packages is unrelated to my original issue, but I thought I should share it with you in case it helps understanding the original issue.

EDIT 2:
FYI, I had to install the Logitech Media Server (LMS) several times before I could get it to start. I am wondering if this could have messed up some packages in my system, which would then prevent the Remote-Control from installing properly. Installing the 2 SSL packages later cleaned up the system, which is why the Remote Control is now able to install… Just a theory (trying to help in case others are running into the same issue)…

Anyways, it works now.

• This reply was modified 7 years ago by Jazzfood. Reason: I just tried again after installing some SSL packages and it now seems to work
• This reply was modified 7 years ago by Jazzfood. Reason: Edit 2: I just thought of an issue I had during the LMS installation and I am wondering if this could be the reason for the Remote-Control installation fail

[Jazzfood premium]

Jazzfood premium

2. November 2017 at 20:16 #32264

Hi,
I am new to the Max2Play experience, and I enjoy it so far.

However, I would be curious to know if anybody has been able to install ShellInABox recently. The Remote Control plugin was added successfully to my M2P Web Interface, and when I push the „Install ShellInABox“ button, the installation seems to run smoothly and report success; but when I hit the refresh page button, as suggested, it keeps showing the „Install SheelInABox“ button (instead of the expected “ShellInABox is installed”) and the ssh-console window is not shown.
I am running on Windows 10 Pro in Chrome (also tried Edge or IE Explorer); my board is RPi3, with a 7 inch touch screen, no extra audio card (yet). I have tried updating Max2Play (from the Settings/Reboot) page but it did not help. As suggested in one of the messages above, I also tried to „Force Update to latest Beta for Max2Play“, but that resulted in my system not being able to boot properly (I was suddenly asked for a password during booting, and Jive Lite would not start!); so, I ended up reinstalling MAx2Play from scratch. I also searched the forum, but could not find any hint on this topic (except this thread).
Any suggestions?
Thanks.