Forum Replies Created
-
-
5. Februar 2018 at 15:43 #33863
Hi antonio,
The important thing is to make sure the resolution fits with one of the Jivelite skins we offer.
For turning off with touchscreen, we currently only offer the modified joggler skin which is available for WaveShare touchscreen resolutions as well. You can check out the Jivelite plugin and its optional skins to see the exactly resolutions.
5. Februar 2018 at 15:27 #33862Hi alex,
As I often try to communicate, setting up Max2Play, or any setup with Pi and sound in a car is a problematic challenge for various reasons.
Your best bet would be to use a GUI with touchscreen or another kind of playback interface to circumvent the many possible issues that might arise in a setup utilizing an access point on a Pi running in a car with a sound card attached (and probably music storage device as well).
You could also try setting up some simple HTTP commands (try using the Voice Control plugin beta to get some example commands and further info).
5. Februar 2018 at 15:20 #33860Ja, dort findest du jedoch mehrere weitere Infos und Links zu größeren Übersichten und Tutorials 😉
5. Februar 2018 at 15:18 #33859Lass uns wissen, falls das Problem bei einem neuen Image erneut auftaucht. Falls ja, nenn uns bitte dein bisherigen Schritte bei der Installation und wir werden versuchen das Problem zu rekreieren.
5. Februar 2018 at 15:10 #33855Hi Mike,
HW volume control is different with shairport, so that probably shouldn’t work anyway.
Kodi should always be installed as it comes preinstalled on all Max2Play. You can start from the Kodi tab.
What are the parameters you added for HW volume control in the Squeezelite advanced settings?
5. Februar 2018 at 13:49 #33853You can use the image burner plugin to create a back-up -img file of your current Max2Play and just burn it again if you get stuck somewhere 😉
5. Februar 2018 at 13:24 #33852Hi ofarim,
What version of the OLED is yours? As mentioned, you can check with our instructions. Did you try turning the one connector as is required for version 2?
1. You need to connect the pins to boot the device without a power button. We do not recommend running the device without a power button.
2. You can use the LMS web interface slider, Jivelite, your Squeezebox app of choice (Squeezer for Android) or another Squeezebox interface software (e.g. SoftSqueeze for Windows).
2. Februar 2018 at 17:21 #33819Thanks for the feedback.
Indeed we are looking for a good solution to offer in terms of small display unit that does not impede on the GPIOs of the Pi.
Currently, we only offer the OLED for the I-Sabre V3.
Did you try using our current Stretch beta and the proper Jessie lite version of Max2Play?
2. Februar 2018 at 17:06 #33818Hi kowi,
Die Parameter sind für die hw volume control Einstellung, welche für vollen Sound unabdingbar ist und deshalb automatisch gesetzt wird. Für den Equalizer müsste diese Funktion abgeschaltet werden, was wiederum dem Sound schaden kann und deshalb von uns abgeraten wird zu tun.
Grundsätzlich müsste der Equalizer dann aber funktionieren.
2. Februar 2018 at 17:03 #33817Hallo Martin,
Das Problem hatten wir in der Tat noch nicht.
Guck einmal, dass Shairport und Squeezelite nicht die gleichen Ausgängsgeräte ausgewählt haben wenn beide laufen und versuche einmal Kodi upzugraden im Menü.
2. Februar 2018 at 16:37 #33816Hi Ofer,
Please update to the latest beta of Max2Play (under „Settings/Reboot“ klick „beta update“).
This display and its drivers have had a recent update to make the time display dynamic, there is a discussion on this subject in German (you can use google translate).
2. Februar 2018 at 15:24 #33815Hi macpac,
If you have a Squeezebox Server running, do you not use shairtunes2?
In any case, you have the same output for both players, so they cannot run simultaneously. Try selecting default_hifiberry for one of them.
If there’s still no sound, select „none“ in HiFiBerry, reboot, reselect the light and reboot.
2. Februar 2018 at 15:11 #33814Hi timb,
– The apps and other controlling software of Squeezebox connects to the server for control. Make sure your NAS is connected to the same network and that both devices do not have any potential blocking software.
– Try using the IP of your mount’s device instead of the name, also try adding a custom login if you have not yet.
– If you have not yet, try using ethernet or change the position of your device in the WiFi network.
1. Februar 2018 at 13:01 #33789Hi macpac,
The miniamp does not support hw volume controlso MPD does not have dynamic volume config.
But you need shairport as your player anyways if you prefer AirPlay. Just select „simple airplay“ in the HiFiBerry plugin, reboot and you should see max2play as an AirPlay device.
1. Februar 2018 at 12:59 #33788Hi NearTheBeach,
Thank you for the quick follow-up and the kind words 🙂
1. Februar 2018 at 12:58 #33787Hi dd-gamer,
Entschuldige die unklare Ausdrucksweise, die Befehle sind dynamisch gelistet in diesem Plugin.
Z.B. hier bei meinem Tester die Befehle für Start und Stop:
Start Playing for this device:
http://max2play:9000/status.html?p0=play&player=b8:27:eb:a6:f6:32Pause for this device:
http://max2play:9000/status.html?p0=pause&player=b8:27:eb:a6:f6:321. Februar 2018 at 12:55 #33786– Should not be an issue, Kodi comes free and preinstalled on our image, you can test it out now.
– Not sure I understand, it is ideal to have all players and the server connected via LAN but WiFi works too.
– Our core features are free as well as the image download for the Premium Plugins you get a 1 month trial license in our shop.1. Februar 2018 at 12:49 #33785Hi kowi,
Der HW Volume Control erlaubt es bei Soundkarten mit digitalem Mixer (wie dem AMP2) eine direkte Verbindung zwischen dem Soundmixer und der Lautstärkeregelung beim Player Squeezelite (LMS-Regler, Regler bei der HiFiBerry Menüseite). Andernfalls wird Softwarelautstärke nur vom Optimum der Wiedergabe runterregeln können und der Wiedergabequalität schaden.
Das Eingabefeld ist zum manuellen Eingeben der Werte des Equalizers.1. Februar 2018 at 10:36 #33784Hi alex,
I assume the HD is connected to the Pi. Then you make it a SambaShare.
31. Januar 2018 at 15:59 #33776Hi guys,
Some updates:
– We fixed shairtunes2 and Jivelite issue in our newest beta, a beta update should fix both.
– Squeezebox Server currently works with the version 7.9 Nightly, not 7.9 proper.@sf:
Could you share the parameters of your mountpoint, tell us your NAS model and whether you had this issue with another version of Max2Play too?31. Januar 2018 at 12:17 #33770Hi teggenligger,
Thanks for the follow-up, glad you got it working. 🙂
31. Januar 2018 at 12:16 #33769What power supply are you using and what capacity are your speakers? These two factors might be an issue as well.
You can also try running a test playback with another OS to make sure the issue is not a hardware defect.
31. Januar 2018 at 12:14 #33768Hi alex,
First of all thank you for the kind words. We appreciate the positive feedback 🙂
On your request, we built an image burner plugin that lets you create a backup of the whole Max2Play installation to burn as a new image.
However, for music and media files we recommend using an outside method. If you have your files connected via USB, you can make a SambaShare of the folder and back it up on another system most easily. If you have your media on a network share, the backup should be made from that share’s device.
I hope this answers your question but I am not entirely sure what part of your Max2Play system exactly you want to back up.
31. Januar 2018 at 12:09 #33767Hi kowi,
Ende Dezember konnt ich es noch erfolgreich testen. Sind die Kommandozeilenoptionen jetzt leer?
Ich habe es jetzt nochmal ausgiebig getestet. Es funktioniert, aber nur ohne hardware volume control. Also grundsätzlich abzuraten.
Falls man doch drauf zugreifen will:
– deactivate build-in audio, reboot
– Kommandozeilenoptionen rausnehmen, speichern
– Auswahl “plugequal”
– Haken bei “Use Graphic Equalizer”31. Januar 2018 at 11:59 #33766Super! Falls du noch Inspiration für die Erweiterung brauchst kannst du unsere Blog-Artikel zu Bad und Schlafzimmer sowie zum allgemeinen Multiroom-Ausbau konsultieren.
Wenn die Erweiterung ansteht sag Bescheid, für individuelle Kaufberatung steh ich auch zur Verfügung 😉30. Januar 2018 at 17:57 #33762Hi guys,
Thanks so much for the feedback! I will keep updating the first post with issues we were able to recreate and are looking into. I will also try to recreate all your issues and give feedback as soon as I can. 🙂
30. Januar 2018 at 16:46 #33759Hi CaiPi,
Max2Play ist eigentlich komplett ohne Desktop-Ausgabe konzipiert als kopfloses System. Auf Anfrage haben wir einen rudimentären Desktop und eine Browser-Installation angefügt, diese ist jedoch nicht wirklich eine Kompetenz von uns. Die Ausgabe wird eigentlich nur von Jivelite und Kodi genutzt.
Du kannst noch die Option „Disable Screen Sleep on Desktop“ aktivieren (Raspberry Settings), aber ich weiß jetzt nicht auf Anhieb ob dies auch beim Wechsel von Kodi hilft.30. Januar 2018 at 16:41 #33758Hi NewOne,
Erstmal Glückwunsch zur Lösung und entschuldige bitte die Unannehmlichkeiten bei der Einrichtung.
Jetzt aber erstmal viel Spaß mit dem Max2Play System! 🙂
-
