Forum Replies Created
-
-
19. MĂ€rz 2018 at 14:11 #34533
Hi blentav,
Wie bei HĂŒseyin wĂŒrden wir hierbei persönlich per Mail mit dir das Problem finden. So können wir bei einem möglichen Hardware-Defekt direkt die nötige Retoure in die Wege leiten.
Bitte schreib uns eine Mail an [email protected] mit deinem Setup, deinen bisherigen Schritten und deiner Problematik.
19. MĂ€rz 2018 at 13:49 #34531Hi Gian,
No dist-upgrade, we have Stretch Beta that will come out officially soon.
What router are you using M2P with?
19. MĂ€rz 2018 at 13:44 #34530Hi Paul,
That all sounds good. The „error“ is fine and should not hinder playback. It’s not part of the log, bust just of the command line options. The name is listed as the name of your Max2Play device. You should still be able to play to it, I have the same output. After starting playback on your phone you should get the following output:
#### Librespot Output ####
INFO:librespot: librespot 8f8eb8c (2018-02-28). Built on 2018-03-05. Build ID: 1ErnJKzS
INFO:librespot_core::session: Connecting to AP „gew1-accesspoint-b-kgs7.ap.spotify.com:4070“
INFO:librespot_core::session: Authenticated as „xxxxxxxxxxxxxxxxx“ !
INFO:librespot_playback::audio_backend::alsa: Using alsa sink
INFO:librespot_core::session: Country: „DE“19. MĂ€rz 2018 at 13:22 #34528Hi Mario,
Thanks for following up! đ
I’ll mark the topic as closed.
19. MĂ€rz 2018 at 13:20 #34526Okay, we will try to recreate this issue. Thank you for your collaboration and patience.
19. MĂ€rz 2018 at 13:19 #34525Hi majones,
I’m not entirely sure what you want to accomplish with Max2Play. Could you elaborate?
19. MĂ€rz 2018 at 13:16 #34522If it’s unchecked it’s not active. Please check whether it’s the FORK version and that not other versions are active.
The plugin adds AirPlay functionality to all Squeezelite players connected to the LMS, you can see them connected in the top right corner of your LMS menu.
19. MĂ€rz 2018 at 12:51 #34521Hi BlueSnake,
Entschuldige die spĂ€te RĂŒckmeldung.
Kannst du uns den Debug Info aus dem MenĂŒ kopieren?
19. MĂ€rz 2018 at 12:50 #34520Hi Thomas,
Yes, that should work. You just have to create another player for the PiFi with MluitSqueeze and run PULSE on the audioplayer menu’s players.
19. MĂ€rz 2018 at 12:49 #34518Hi fourchtein,
What exactly are you not able to install and which version of Max2Play are you using?
Sorry about the late response. By writing in a topic where the creator already added „Erledigt!“ („solved“ in German), I was not able to recognize your new request quickly enough.
16. MĂ€rz 2018 at 13:33 #34479Hallo nawiat,
Es wird ziemlich sicher am WLAN liegen. Der Pi teilt BT und WiFi auf einer Antenne und ein Chip. Bei Einsatz von beidem kann es oft zu KonnektivitÀtsprobleme kommen. Beim Einsatz von BT im LAN sollte sich die Problematik einstellen. Auch ein WLAN oder BT Dongle kann Abhilfe schaffen.
16. MĂ€rz 2018 at 13:01 #34477Hi Jonathan,
If it’s not too much of a hassle, please try burning a fresh image, immediately after the first boot make a beta update and try installing the nightly again. If the error still occurs, please share the debug info in your Squeezebox Server menu.
I tested today on a new image and did not encounter the issue.
16. MĂ€rz 2018 at 12:22 #34476What options do you have selected in the RPi-Display Plugin? In our 7 inch touchscreen tester without this issue it’s only LCD as Default Display and Remove Cursor (e.g. mouse pointer). Also, please share the debug info of your RPi-Display Plugin and Jivelite Plugin.
16. MĂ€rz 2018 at 12:19 #34475Hallo Ludger,
– Du kannst die Bibliothek fĂŒr den LMS manuell einschrĂ€nken. Sonst gibt es da, glaube ich, keine direkte, einfache Lösung. Du kannst dies aber nochmal im SlimDevices Forum anfragen, dort gibt es viele Squeezebox Experten die vielleicht noch eine bessere Idee haben đ
– Aktuell mĂŒsstest du dafĂŒr manuell einen cronjob einrichten. Die Idee eines cron-plugins ist aber nicht schlecht, das werde ich beizeiten mit unserem Chefentwickler besprechen. Du kannst dafĂŒr aber auch selbst ein Plugin einrichten mit unserem Plugin Builder und dessen Tutorial gestaltet sich das relativ einfach.
– Ja, mit einem HTTP-Request lĂ€sst sich zB Shutdown ganz einfach integrieren. Die URL die angezeigt wird beim runterfahren kann ĂŒberall kopiert und eingesetzt werden.
16. MĂ€rz 2018 at 12:14 #34471Hi philosopher,
Our images are intended to run headless. So you would only need a screen connected for Jivelite or Kodi.
For console access, you can use our Remote Control plugin or a simple software like putty.
16. MĂ€rz 2018 at 10:37 #34465Hi Francis,
In general, you are right, with Max2Play’s multiroom features synchronized streaming is easily and reliably done.
However, you would need a great digital input sound card for the Raspberry for any signal to be enhanced through this process and we do not have a simple solution for processing audio input.
You can however mount any folder from your network to Pi for the server to host as its library.
15. MĂ€rz 2018 at 17:06 #34459Hallo nawiat,
Leider konnte ich diesen Fehler hier nicht reproduzieren mit einem neuen Image.
Welche Version der Beta hast du jetzt am Laufen?
15. MĂ€rz 2018 at 16:32 #34457Hi Paul,
You did not receive the same error message as the other users whose problem we fixed, but please also try making a beta and then reinstalling the Spotify Connect Player.
15. MĂ€rz 2018 at 16:31 #34456We found the fix, you can make a beta update and reinstall in the Spotify Connect Player to get it working again.
For new installations of Max2Play, the fix will be added automatically.
15. MĂ€rz 2018 at 16:19 #34455Which speed class are your cards? Also, please try downloading the image again to rule out a problem with the download.
There is an image burner software that can eliminate some possible errors during burning, this might also help in your situation.
15. MĂ€rz 2018 at 14:52 #34453Hi medapayne,
You just need to add a share in the Filesystem/Mount menu of your web interface from your NAS. You can find an article on how to do it in our Wiki in the help section.
15. MĂ€rz 2018 at 14:20 #34452Hi medapayne,
Sorry about the confusion.
All players (your zero’s, too) connected to the LMS with shairtunes2 on it automatically turn into AirPlay devices.
Make sure you only have the shairtunes2 (fork) plugin active and no other plugins called shairtunes in the LMS settings.
The IP in shairport is for an automatic switch between Squeezelite and shairport. So if you want to use both, this feature makes sure that one does crash the other when both are being played.
15. MĂ€rz 2018 at 14:15 #34451Hi Pieter,
I assume you mean the Pi 3B and not the Pi 3B+, because this one needs the Stretch Beta with a new kernel to boot.
If you have the normal 3B, you should also be able to normally boot after burning the card. What software do you use to burn?
15. MĂ€rz 2018 at 14:13 #34450Hallo Lampchris,
Check mal bitte die Debug Info in deinem Audioplayer.
Wir haben dieses Setup mit dem RPiA noch nicht testen können, also versuche auch einmal wiederzugeben nachdem du das Display wieder entfernt hast um mögliche Fehlerquellen einzugrenzen.
15. MĂ€rz 2018 at 14:11 #34449Hi Sven,
Hast du dein GerÀt schon neugestartet nach der Installation? Bei meinem Tester ging Kodi 17 direkt nach einem Neustart.
15. MĂ€rz 2018 at 13:53 #34448Hi Stefan,
There seems to be a general issue with the current install of the Spotify Connect player. We are investigate this at the moment.
For now, you can use the Spotty plugin of our Squeezebox Server. Here’s our tutorial on setting it up.
15. MĂ€rz 2018 at 12:35 #34446In seltenen FĂ€llen kann es bei dieser Version zu Komplikationen kommen bei bestimmter Netzteil-Verbindung.
Bitte versuche einmal, das System direkt an einer Steckdose laufen zu lassen, um dies als Fehlerquelle auszuschlieĂen.
-
