Forum Replies Created
-
-
4. Juni 2018 at 11:54 #36043
Hi chrimoe,
Please check the pin connection for power between the sound card and the screen. With JB Amp HAT it should be 2 and 4 on the P2 section.
4. Juni 2018 at 9:47 #36042Hallo Torsten,
Danke für das ausführliche Log. Könntest du einmal versuchen, die Verbindung zu deiner Fritz.Box neu einzurichten im Web Interface?
1. Juni 2018 at 15:42 #36010Hi Tom,
You do not need a license for the IQaudIO plugin. Just select IQaudIO after the first boot, select your sound card in the menu, reboot and your Squeezelite should have the correct IQ set up.
1. Juni 2018 at 14:01 #36006Please disable build in audio in the Raspberry Settings and add „hw:0“ to your player next.
1. Juni 2018 at 10:49 #36005Hi Andre,
Select none in the allo plugin, reboot, select the boss again, reboot. Then check what the advanced options of your shairport player say and remove autostart from Squeezelite and stop it to be sure.
31. Mai 2018 at 16:47 #36001Hi Stuart,
Thanks for the update, I will try to recreate this issue here.
31. Mai 2018 at 16:32 #36000Hi Charles,
Please check you audio player’s advanced options.
In the command line options there should some values displayed, please paste them here.
31. Mai 2018 at 10:10 #35994Did you alter some things via SSH? If so, please try burning a new image and setting it up from scratch to rule out a dependency issue.
31. Mai 2018 at 10:08 #35992Hi guys,
Sorry about the inconvenience, we fixed the bug for older models. Just reinstall the Spotify Connect Player and it should work again 🙂
31. Mai 2018 at 10:03 #35990Hi guys,
Good news! The feature has now been added to our most current beta, just make the beta update, install the Squeezebox BT solution in the Bluetooth Plugin and it will work the same as in the jessie image, only a little smoother and more reliable 🙂
31. Mai 2018 at 10:01 #35989Do you have password protection or write protection plugin enabled?
30. Mai 2018 at 15:32 #35979Hi Manuel,
When you first start Max2Play, it should ask you which sound card you have. After selecting HiFiBerry, you should get the page where you can select advanced as an option while also selection the specific HiFiBerry sound card you are using.
30. Mai 2018 at 12:32 #35972you need to somehow access the max2play web interface. AP mode allows for this. in standalone, it does not do anything else except be accessible for your control device (smartphone, tablet, etc.)
using Max2Play without any second device is possible, too. You just need to config everything beforehand.
30. Mai 2018 at 11:37 #35971Hi Manuel,
You do not need to enter SSH in Max2Play, all config is done from the web interface.
Select „none“ in the HiFiBerry plugin sound card selection, reboot, select the exact sound card you have (I assume HiFiBerry DAC+) and reboot again. Afterwards, your sound card will work with Squeezelite and Shairport if you select „advanced“ in the HiFiBerry plugin.
30. Mai 2018 at 11:33 #35970Hi chrimoe,
You should be able to load any plugin from the Kodi interface through their own GUI and test it out.
Also, we have custom solution for Amazon Instant Video, you can find it in the Max2Play web interface of Kodi and install it in Kodi afterwards.
30. Mai 2018 at 10:00 #35966Very odd, connection should work very stable under WiFi. Do you know which WiFi channel the router is using?
30. Mai 2018 at 9:36 #35964Hi Greed,
Du kannst unser Remote Control Plugin nutzen. Um sudo Befehle auszuführen musst du „sudo su“ nutzen.
29. Mai 2018 at 16:27 #35959Use the Access Point Setup Plugin. There is an Instructable on the setup.
29. Mai 2018 at 16:25 #35958Hallo Simon,
Ich kenne diesen DAC leider nicht, bei ES9038 sollte jedoch der Sabre V3 als Auswahl die beste Wahl sein.
29. Mai 2018 at 16:21 #35957Hi Gerold,
I just recognized the issue. Your version is listed as
Built on 2018-05-03while our current working version should display as 05-18 or newer.Please try reinstalling again and check if this changes in your plugin.
29. Mai 2018 at 16:17 #35956Hi Torsten,
Wir konnten den Anrufblocker mit Pi 3B+ und Stretch Image inzwischen erfolgreich testen.
Starte bitte einmal Fritz.Box und den Pi neu und check danach im Debug Info Fenster vom Callblocker Setup, ob diese vier Prozesse gelistet sind:
ncidd
sip2ncid
linphonec
start_linphone.29. Mai 2018 at 12:01 #35948Hi Mike,
If possible, try installing the exact same version of LMS as before to rule this out as a possible source of error.
28. Mai 2018 at 16:48 #35926By updated, you mean clicking the „Reinstall“-Button in the web interface?
In this case, your Spotify Connect should definitely work.
Please make sure your other players are not interfering (remove autostart, stop the players).
28. Mai 2018 at 16:31 #35923Hi Asheboy,
Thanks for the detailed post, I will try to recreate your issue here to find a fix.
28. Mai 2018 at 14:52 #35921Hi chrimoe,
Please check the settings of the RPi-Display plugin in the web interface and make sure that the 7 inch display has been correctly installed and that „LCD as Default Display“ is enabled.
28. Mai 2018 at 14:07 #35917Hi kiza,
We are not familiar with the PIFI Digi, but it probably also uses the HiFiBerry Digi driver as the PIFI cards are usually Chinese approximations of HiFiBerry cards.
For IR you can try using our selection in the Raspberry Settings for IR GPIO pins.
28. Mai 2018 at 13:40 #35916Hi Kurt and AH,
As detailed in the web interface, this feature has not yet been available for Stretch.
For now, you can either set up the individual BT stream player in the same section for BT playback from a smartphone or use the Jessie image again for this specific feature.
28. Mai 2018 at 13:38 #35915Hi Paul,
Our licenses are time period-based, meaning you can purchase your license for the durations 1 month, 1 year, 2 years or 5 years. Technically, you can activate the premium license on as many Max2Play devices as necessary. As a digital product, it is compatible with every Max2Play image. Once you have bought the license in our shop, the e-mail address you used to order in our shop itself becomes the license code.
Max2Play however is a community project. With each license you buy, you contribute to its further development and the community support.
-
