ggabriel

Forum Replies Created

Viewing 19 posts - 1 through 19 (of 19 total)
  • 1. April 2024 at 20:25 #53134

    Ich habe das Problem für mich gelöst. Hab den piCorePlayer installiert wie hier sehr gut beschrieben: https://docs.picoreplayer.org/how-to/install_lms/.

    Hat keine helbe Stunde gedauert – meine Squeezeboxen laufen wieder. Inklusive Spotify. 🙂

    Good bye, Max2Play – war eine schöne Zeit.

    30. März 2024 at 19:17 #53131

    Das habe ich genauso probiert. Als Ergebnis installiert sich der LMS gar nicht mehr. Mit der Nachricht „LMS existiert nicht“ endet die Installation. Leider. Hab 2.53, 2.56 und 2.58 probiert, mit verschiedenen Varianten des LMS. Auch ein Download des Installationspakets und der Versuch, es von meinem PC aus zu installieren brachte nur das gleiche.

    28. März 2024 at 16:08 #53124

    Danke für den Hinweis. Werde ich dann mal auch probieren.
    Von Picore habe ich auch gehört. Vielleich könnte man das Thema mal hier diskutieren. Ich habe leider ncht viel Raspi Erfahrung, daher fand ich Max2Play mit dem vorinstallierten LMS schon recht cool.

    28. März 2024 at 12:04 #53121

    Auch bei mir das gleiche – nichts funktioniert. Und der Support reagiert auch nicht. Wenigstens ein Statement wäre gut – „wir arbeiten dran“ oder auch „interessiert uns nicht mehr“. Dann könnte man wenigstens nach Alternativen suchen. Für eine eigentlich hervorragende Lösung – wenn sie läuft. Und das tat sie – viele Jahre.
    PS: Danke für den Hinweis das auch eine komplette Neuinstallation fehlschlägt. Das wäre mein nächster Versuch gewesen.

    • This reply was modified 7 months, 4 weeks ago by ggabriel.
    24. März 2024 at 18:58 #53116

    Still not working. I switched back rom beta to the recent version 2.58, and tried several version of the Squeezebox Server from here: https://lms-community.github.io/lms-server-repository/ (8.4, 8.5, 9.0). Still the same problem – „Status: Squeezebox Server läuft nicht“ – the server does not run with no specific reason given. The link to further information doesn´t do anything. So I am a bit lost now …

    22. März 2024 at 13:05 #53113

    I did actually upgrade Max2Play to the beta version, and installed LMS 8.4 using this version: https://downloads.slimdevices.com/LogitechMediaServer_v8.4.0/logitechmediaserver_8.4.0_arm.deb.
    No changes – it does not start. Here is the log:

    #### SQUEEZESERVER LOG ####
    [24-03-19 18:58:52.5870] Slim::Utils::Update::checkVersionError (185) Beim Suchen nach einem Logitech Media Server-Update ist ein Fehler aufgetreten:
    404 Not Found
    [24-03-19 23:01:31.8160] Plugins::Spotty::API::Token::_killTokenHelper (201) Token refresh call helper has closed unexpectedly? – Please consider re-setting your Spotify credentials should this continue to happen.
    [24-03-19 23:01:31.8175] Plugins::Spotty::OPML::__ANON__ (200) Failed to get featured playlists and/or token – do not continue
    [24-03-22 08:09:27.2788] Slim::Networking::IO::Select::__ANON__ (130) Error: Select task failed calling Slim::Networking::Async::HTTP::_http_read_body: Can’t call method „pluginData“ on an undefined value at /usr/share/perl5/Slim/Plugin/InternetRadio/TuneIn/Metadata.pm line 281.
    ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0xd1a5c18)

    #### PERL VERSION ####
    v5.24.1

    #### SQUEEZEBOXSERVER PERL VERSION FOUND ####
    5.24

    11. März 2021 at 18:51 #50934

    Many thanks. The file type settings solved the issue. Did set the Ogg Vorbis type to „Native“. I send a stream with 192kBit/s and it works.

    I did not find a way to watch the stream rate in LMS – is this hidden somewhere?

    5. März 2021 at 16:09 #50885

    Hi MarioM, many thanks for the reply.

    In the server log I found entries like these ones, but I am not sure what to do with them:
    [21-03-04 21:24:17.5570] Slim::Formats::RemoteStream::open (105) Can’t open socket to [192.168.178.25:8443]: 110: Connection timed out
    [21-03-04 21:24:17.5584] Slim::Player::Song::open (478) Warning: stream failed to open [http://192.168.178.25:8443/traktor.ogg].
    [21-03-04 21:24:29.2552] Slim::Player::Song::open (478) Warning: stream failed to open [http://192.168.178.25:8443/traktor.ogg].
    [21-03-04 21:31:28.6617] Slim::Formats::RemoteStream::open (105) Can’t open socket to [192.168.178.25:8443]: 110: Connection timed out
    [21-03-04 21:31:28.6630] Slim::Player::Song::open (478) Warning: stream failed to open [http://192.168.178.25:8443/traktor.ogg].
    [21-03-04 21:31:33.0299] Slim::Player::Song::open (478) Warning: stream failed to open [http://192.168.178.25:8443/traktor.ogg].
    [21-03-04 21:49:28.6625] Slim::Formats::RemoteStream::open (105) Can’t open socket to [192.168.178.25:8443]: 110: Connection timed out
    [21-03-04 21:49:28.6638] Slim::Player::Song::open (478) Warning: stream failed to open [http://192.168.178.25:8443/traktor.ogg].
    [21-03-04 22:20:23.7937] Slim::Player::Song::open (478) Warning: stream failed to open [http://192.168.178.25:8443/traktor.ogg].

    Regarding the second recommendation (check whether the Squeezebox server converts the stream again) – where can I check this and how can I prevent it? I was checking in the LMS interface „Extended (Erweitert)“ and could not find anything related.

    28. Oktober 2020 at 17:54 #49970

    Update: Surprisingly, clicking on „Öffne Squeezebox Server Webadministration“ a bit later again – it works. Cool. Maybe the previous page was just cached.

    28. Oktober 2020 at 17:41 #49969

    Hi, I did get the image from here: https://www.max2play.com/getting-started/.
    Got the Raspi 3 running again.
    Updated the Raspi 3.
    Installed Squeezeserver Nightly 8.0
    Tried to open it – same problem: „Firefox kann keine Verbindung zu dem Server unter 192.168.178.78:9000 aufbauen.“

    #### LINUX-VERSION ####
    Distributor ID: Raspbian
    Description: Raspbian GNU/Linux 9.8 (stretch)
    Release: 9.8
    Codename: stretch

    28. Oktober 2020 at 9:46 #49941

    I am running this version:
    #### LINUX-VERSION ####
    Distributor ID: Raspbian
    Description: Raspbian GNU/Linux 9.3 (stretch)
    Release: 9.3
    Codename: stretch

    17. September 2019 at 21:58 #47121

    Yes – it shows available versions of the Logitech Media Server.
    The only interesting thing is that the interface of the media server shows an available update: 7.9.2 – 38514, while the Rasp interface offers 7.9.0, 7.9.1 and Nightly 7.9. Installed is version Logitech Media Server Version: 7.9.2 – 1550612824.
    But since everything is running ok, I assume there is no need for action.

    13. September 2019 at 16:25 #47080

    Surprisingly – it updated today to 2.50. Didn´t change anything.

    10. September 2019 at 20:06 #47071

    #### LINUX-VERSION ####
    Distributor ID: Raspbian
    Description: Raspbian GNU/Linux 9.3 (stretch)
    Release: 9.3
    Codename: stretch

    5. September 2019 at 12:17 #47003

    Seems to be ok. The Raspi is connected to a FritzBox via LAN and appears in the FritzBox interface as ok as well. The Raspi based Squeezebox Server is also capable to receive online streams.

    5. September 2019 at 12:15 #47002

    Health Checker

    Internet: Connected
    CPU Load: 0.24
    SD Card Usage: 74%
    Temp CPU: 56.4
    Power Supply: OK

    2. März 2019 at 20:51 #44612

    I think I found a solution: The plugin Spotty for Spotify plus a Spotify Premium account. Super easy to install and runs synchronyously on all of my Squeezebox devices (touch and radio).

    2. März 2019 at 11:48 #44605

    Hmm – this would be really sad. I love my Squeezeboxes. Out of curioity – would there be any other music streaming service I could make work with the Logitech Media Server? Spotify?

    1. März 2019 at 18:03 #44595

    I am running several sqeezebox radios. They do all connect to the LMS on the Raspi. Until recently, Napster did work in this environment. Today the Squeezebox asked me to switch to the squeezebox.com server when I tried to start Napster. Also, in the webinterface of the LMS I see only links to my music collection and to the radio stations, but no plugin´s or „own applications“. Internet is working – the radio streams work nicely on all Squeezebox radios that are connnected.
    I did reboot te Raspi as well as the Sqeezebox radio.
    Regarding your final question – how would I add the Napster app to my Raspi LMS?

    • This reply was modified 5 years, 8 months ago by ggabriel.
Viewing 19 posts - 1 through 19 (of 19 total)