fabien44

Forum Replies Created

Viewing 16 posts - 1 through 16 (of 16 total)
  • 3. September 2018 at 11:37 #37625

    Hi Heiner,

    thanks for the reply.
    Unfortunatly, i cannot connect directly the box to my amp bacause of lack of input. My amp is internal connected to the Raspberry. This is one box containing amp & rasp with only USB/HDMI/Ethernet ports of the rasp are available.

    I would imagine a software solution with a usb device to get the SPDIF signal.

    24. März 2018 at 11:40 #34712

    Hello

    i found a solution to install Plex Media Server.
    You must open a SSH session and follow this guide:
    https://wiki.mchobby.be/index.php?title=RASP-PLEX-MEDIA-SERVER-Installation

    I just put these commands:

    sudo apt-get install apt-transport-https -y –force-yes
    wget -O – https://dev2day.de/pms/dev2day-pms.gpg.key | sudo apt-key add –
    echo „deb https://dev2day.de/pms/ jessie main“ | sudo tee /etc/apt/sources.list.d/pms.list
    sudo apt-get update
    sudo apt-get install -t jessie plexmediaserver -y
    sudo reboot

    Then i open web interface to set up Media Server Plex
    your ip:32400/web

    23. März 2018 at 13:02 #34696

    Hello

    i am interested in as well 🙂

    17. Oktober 2017 at 16:38 #31945

    Hello Heiner,

    i would like a former working version for Jessie, maybe a 16 version?

    Thanks

    17. Oktober 2017 at 12:04 #31933

    Hello

    where can i found deb file for previous version of KODI? I would like to install a former version to test if it works.

    Thanks

    2. Oktober 2017 at 19:54 #31663

    Hello again

    i updated again and reboot again with no success.

    I made a video to show the screen when i click on „Start Kodi“:

    Any idea?

    Thanks

    2. Oktober 2017 at 16:04 #31659

    Hello,

    i have an HDMI connection on my TV set which detects source input.

    When i start Kodi, screen turns to black for 1 second and turns back to M2P desktop (cycle repeats 2/3 times).
    I have already reboot the system without success.

    I will update again Kodi tonight.

    4. September 2017 at 12:18 #31100

    Thanks Heiner for the link.
    So Kodi can run over HDMI without sharing squeezelite player audio process, good news!

    So why, in this config, prevent theses 2 softs to run at same time? That’s no sense and make impossible an remotly usage of a mediacenter.

    31. August 2017 at 17:25 #31050

    Hi Heiner,

    It’s not convenient at all for a mediacenter solution (no mouse, no keyboard, only remote control access)

    In Kodi, if i set HDMI passtrough audio output, it uses pulseaudio as well?

    You say when Kodi is closed -> Squeezelite auto-starts but on the opposite side, if i run Kodi, could Squeezelite auto-stop as opposed to display the error message cannot run?

    15. August 2017 at 17:02 #30650

    Hello Heiner,

    i contacted Odroid forum but they said to see with you. It should be a software issue.

    The post i am referring to is:
    https://www.max2play.com/en/forums/topic/stuttering-or-no-sound-on-resume-every-monring-or-so-pcm2707-usb-dac/

    You advised to set up squeezelite to use hardware address of the card?

    15. August 2017 at 11:31 #30634

    Hello

    is there a link to this post?
    https://www.max2play.com/en/forums/users/lefuneste/replies/

    Thanks

    14. August 2017 at 21:04 #30622

    Any diagnostic is welcome 🙂

    5. August 2017 at 16:22 #30446

    Hello,

    same problem occurs 🙁
    I cannot run Kodi anymore after updating it.

    3. August 2017 at 16:07 #30385

    Hello,

    To solve incompatibility issue, i consider to introduce a USB->I2S XMOS interface card to connect Odroid XU4 to my I2S DAC.

    I read some reviews and 2 products have retained my attention:

    – Singxer F1 XU208 XMOS, 170$ (galvanic isolation and 2 femtosecond CRYSTEK clocks)
    – Singxer C1 XU208 XMOS FEMTO AS318B ACCUSILICON, 70$ (same as F1 i guess but without isolation)
    https://kitsunehifi.com/product/singxer-c1-as318b/

    What do you think about theses cards relative to SQ improvement? Galvanic isolation of F1 should make difference and justify upper price?

    Thanks

    31. Juli 2017 at 21:34 #30270

    Hello,

    You said Sparky is not supported but i can read in the Changelog V.2.37 – 06.10.2016:

    – Added Beta Max2Play Image for Allo Sparky Board

    What is the image i must install on the sparky to make it work?

    Thanks

    21. Juni 2017 at 19:45 #29665

    Hello,

    same question, does it board is supported?
    CPU: Rockchip Quad-Core RK3288 processor

    Thanks for this information

Viewing 16 posts - 1 through 16 (of 16 total)