dtesan

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • 27. Dezember 2017 at 0:21 #33107

    Found something new…… workaround with dnsmasq.conf works until I install SD-Card-Protection… Entries in dnsmasq.conf are still there but DNS is not running anymore…. after deinstalling SD-Card-Protection and editing dnsmasq.conf again (because the file is empty now) with Google-DNS-Servers it works again…..

    • This reply was modified 6 years, 10 months ago by dtesan.
    27. Dezember 2017 at 0:05 #33105

    ssh [ip-adress-of-pi]

    Just type in „sudo nano /etc/dnsmasq.conf“ and add the two lines „server=8.8.8.8“ and „server=8.8.4.4“
    Ctrl+x, Save
    sudo reboot

    • This reply was modified 6 years, 10 months ago by dtesan.
    18. Dezember 2017 at 16:54 #33030

    Also ein Knacken habe ich nicht. Ohne HifiBerry-Board zeigt die CPU nach 5 Minuten auch schon 77 Grad an…. meines Erachtens viel zu hoch….. wohl bemerkt alles ohne das Gehäuse drum herum…..

    jetzt sind es nach 10 Minuten über 80 Grad….

    • This reply was modified 6 years, 11 months ago by dtesan.
    14. Dezember 2017 at 17:12 #32947

    I think too….. I have several RPI´s and now I put the board with the defunct WiFi into the Hifiberry AMP2….. there I not need BT…. Thanks your help…..

    14. Dezember 2017 at 17:03 #32945

    I did try another RPI3 Board and that works with same SD-Card…. I think Bluetooth-Chip on Board is faulty….

    14. Dezember 2017 at 17:00 #32943

    where can I activate Bluetooth in raspi-config?

    14. Dezember 2017 at 12:22 #32939

    I did the installation exactly how you described in your videos…. Health-Checker says all is green….. I also tried to Install fresh Raspbian Image ( newest one ), did all Updates but no adapter found…. could it be possible that the Onboard BT is corrupted? or could it be something with the connected RPI-7″-Display? Yesterday I bought a RPI-Starter-Kit with Hifiberry AMP+ from your site… should arrive today… I will try to use the RPI from that package in my Installation to test BT again….

    14. Dezember 2017 at 1:36 #32934

    I have the same problem. Image installed on RPI3 with 7″ Display, Bluetooth-Plugin installed but no Bluetooth…. Bluetooth-Dongle: NOT available

Viewing 8 posts - 1 through 8 (of 8 total)