Forum Replies Created
-
Posted in: Allo USB Bundle
-
5. Februar 2017 at 11:47 #26677
Thanks for this. I’m not quite as technologically dumb as I may have been making out. Your instructions on tweaking picoreplayer with SSH were indeed very clear and worked perfectly on the newest version. So many many thanks for that. I remain with max2play for LMS.
So the message to max2play here is:two users (at least) happily using a rival product to play DTS encoded flac when they would rather use max2play if only it were to get its act together!
D
4. Februar 2017 at 17:35 #26672Really didn’t mean to come across as ungrateful I agree those steps should help the developers! I aso agree that logically passthough should be straightforward. With picoreplayer it used to work out of the box up to v1.18, but they broke it and never replied to any of my questions. I gave up on them because they seemed to produce too many poorly tested updates.
4. Februar 2017 at 12:59 #26668My post originally.
I too would very much like to see this issue picked up as it remains the one key area where max2play squeezebox emulation falls short of the real thing (and I really value it).
Personally I cannot make picoreplayer play DTS after v 1.18 not (even the new version) and do not have the technical skills to follow your post. In any event, no disrespect, your solution is one for the linux bregade not the average user that I think max2play is (rightly) aiming for.
As you say Squeezelite must be altering the stram in some subtle way. But it must be possible to solve this as Kodi (on max2play) manages passthrough of DTS perfectly.
Thanks for posting on this.
D
20. Mai 2016 at 11:39 #20191Sorry. My original error report was on 2.26. I’m using an RPI2 for this.
I installed 2.29 based on Raspian Jessie Lite and upgraded in situ to 2.31. gmediarenderer still did not install.So I’ve done a clean installation of the 2.31 Hifiberry version now on the website. Alterations then made: I expanded the file system and and installed the 192kHz kernel. Outcome gmediarenderer STILL does not install. The log shows the following:
/tmp /var/www/max2play/public
Reading package lists…
Building dependency tree…
Reading state information…
autoconf is already the newest version.
automake is already the newest version.
automake set to manually installed.
libtool is already the newest version.
The following packages were automatically installed and are no longer required:
libauthen-sasl-perl libencode-locale-perl libfile-listing-perl
libfont-afm-perl libgssapi3-heimdal libheimntlm0-heimdal libhtml-form-perl
libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl
libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl
libhttp-message-perl libhttp-negotiate-perl libio-html-perl
libio-socket-ssl-perl libjpeg-progs libjpeg9 libkdc2-heimdal
liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl
libnet-http-perl libnet-smtp-ssl-perl libnet-ssleay-perl liburi-perl
libwww-perl libwww-robotrules-perl xscreensaver-data
Use ‚apt-get autoremove‘ to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists…
Building dependency tree…
Reading state information…
gstreamer0.10-alsa is already the newest version.
gstreamer0.10-alsa set to manually installed.
The following packages were automatically installed and are no longer required:
libauthen-sasl-perl libencode-locale-perl libfile-listing-perl
libfont-afm-perl libgssapi3-heimdal libheimntlm0-heimdal libhtml-form-perl
libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl
libhtml-tree-perl libhttp-cookies-perl libhttp-daemon-perl libhttp-date-perl
libhttp-message-perl libhttp-negotiate-perl libio-html-perl
libio-socket-ssl-perl libjpeg-progs libjpeg9 libkdc2-heimdal
liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl
libnet-http-perl libnet-smtp-ssl-perl libnet-ssleay-perl liburi-perl
libwww-perl libwww-robotrules-perl xscreensaver-data
Use ‚apt-get autoremove‘ to remove them.
The following extra packages will be installed:
autopoint debhelper gettext gettext-base gir1.2-freedesktop gir1.2-glib-2.0
gir1.2-gstreamer-0.10 gstreamer0.10-gconf gstreamer0.10-x intltool-debian
liba52-0.7.4 libaa1 libasprintf-dev libasprintf0c2 libavc1394-0 libcdaudio1
libcdparanoia0 libdca0 libdirac-encoder0 libdv4 libdvdnav4 libdvdread4
libfftw3-double3 libflite1 libgettextpo-dev libgettextpo0
libgirepository-1.0-1 libgstreamer-plugins-bad0.10-0 libiec61883-0 libkate1
libmail-sendmail-perl libmhash2 libmimic0 libmpeg2-4 libofa0
libopencore-amrnb0 libopencore-amrwb0 libraptor2-0 librasqal3 librdf0
libsidplay1 libslv2-9 libsoundtouch0 libspandsp2 libsys-hostname-long-perl
libtwolame0 libunistring0 libupnp6-dev libvisual-0.4-0 libvisual-0.4-plugins
libvo-aacenc0 libvo-amrwbenc0 libxml2-dev libzbar0 libzvbi-common libzvbi0
po-debconf
Suggested packages:
dh-make gettext-doc frei0r-plugins libdv-bin oss-compat libdvdcss2
libfftw3-bin libfftw3-dev gstreamer0.10-doc raptor2-utils rasqal-utils
librdf-storage-postgresql librdf-storage-mysql librdf-storage-sqlite
librdf-storage-virtuoso redland-utils sidplay-base xsidplay slv2-jack
libupnp6-doc libmail-box-perl
The following NEW packages will be installed:
autopoint debhelper gettext gettext-base gir1.2-freedesktop gir1.2-glib-2.0
gir1.2-gstreamer-0.10 gstreamer0.10-gconf gstreamer0.10-plugins-bad
gstreamer0.10-plugins-base gstreamer0.10-plugins-good
gstreamer0.10-plugins-ugly gstreamer0.10-pulseaudio gstreamer0.10-x
intltool-debian liba52-0.7.4 libaa1 libasprintf-dev libasprintf0c2
libavc1394-0 libcdaudio1 libcdparanoia0 libdca0 libdirac-encoder0 libdv4
libdvdnav4 libdvdread4 libfftw3-double3 libflite1 libgettextpo-dev
libgettextpo0 libgirepository-1.0-1 libgstreamer-plugins-bad0.10-0
libgstreamer0.10-dev libiec61883-0 libkate1 libmail-sendmail-perl libmhash2
libmimic0 libmpeg2-4 libofa0 libopencore-amrnb0 libopencore-amrwb0
libraptor2-0 librasqal3 librdf0 libsidplay1 libslv2-9 libsoundtouch0
libspandsp2 libsys-hostname-long-perl libtwolame0 libunistring0 libupnp-dev
libupnp6-dev libvisual-0.4-0 libvisual-0.4-plugins libvo-aacenc0
libvo-amrwbenc0 libxml2-dev libzbar0 libzvbi-common libzvbi0 po-debconf
0 upgraded, 64 newly installed, 0 to remove and 0 not upgraded.
Need to get 30.6 MB of archives.
After this operation, 66.3 MB of additional disk space will be used.
Do you want to continue? [Y/n] Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libasprintf0c2 armhf 0.19.3-2 [31.1 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main libaa1 armhf 1.4p5-43 [49.8 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main libavc1394-0 armhf 0.5.4-2 [21.8 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ jessie/main libcdparanoia0 armhf 3.10.2+debian-11 [51.0 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main libdca0 armhf 0.0.5-7 [91.3 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ jessie/main libdirac-encoder0 armhf 1.0.2-7.1 [286 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ jessie/main libdv4 armhf 1.0.0-6 [76.6 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ jessie/main libdvdread4 armhf 5.0.0-1 [76.3 kB]
Get:9 http://mirrordirector.raspbian.org/raspbian/ jessie/main libdvdnav4 armhf 5.0.1-1 [39.4 kB]
Get:10 http://mirrordirector.raspbian.org/raspbian/ jessie/main libfftw3-double3 armhf 3.3.4-2+rvt [434 kB]
Get:11 http://mirrordirector.raspbian.org/raspbian/ jessie/main libflite1 armhf 1.4-release-12 [12.9 MB]
Get:12 http://mirrordirector.raspbian.org/raspbian/ jessie/main libunistring0 armhf 0.9.3-5.2 [253 kB]
Get:13 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgettextpo0 armhf 0.19.3-2 [115 kB]
Get:14 http://mirrordirector.raspbian.org/raspbian/ jessie/main libiec61883-0 armhf 1.2.0-0.2 [27.9 kB]
Get:15 http://mirrordirector.raspbian.org/raspbian/ jessie/main libmhash2 armhf 0.9.9.9-7 [108 kB]
Get:16 http://mirrordirector.raspbian.org/raspbian/ jessie/main libmpeg2-4 armhf 0.5.1-7 [54.1 kB]
Get:17 http://mirrordirector.raspbian.org/raspbian/ jessie/main libopencore-amrnb0 armhf 0.1.3-2.1 [80.4 kB]
Get:18 http://mirrordirector.raspbian.org/raspbian/ jessie/main libopencore-amrwb0 armhf 0.1.3-2.1 [42.0 kB]
Get:19 http://mirrordirector.raspbian.org/raspbian/ jessie/main libraptor2-0 armhf 2.0.14-1 [135 kB]
Get:20 http://mirrordirector.raspbian.org/raspbian/ jessie/main librasqal3 armhf 0.9.32-1 [144 kB]
Get:21 http://mirrordirector.raspbian.org/raspbian/ jessie/main librdf0 armhf 1.0.17-1+b1 [92.5 kB]
Get:22 http://mirrordirector.raspbian.org/raspbian/ jessie/main libsoundtouch0 armhf 1.8.0-1 [35.7 kB]
Get:23 http://mirrordirector.raspbian.org/raspbian/ jessie/main libvisual-0.4-0 armhf 0.4.0-6 [108 kB]
Get:24 http://mirrordirector.raspbian.org/raspbian/ jessie/main libvo-aacenc0 armhf 0.1.3-1 [71.1 kB]
Get:25 http://mirrordirector.raspbian.org/raspbian/ jessie/main libvo-amrwbenc0 armhf 0.1.3-1 [67.3 kB]
Get:26 http://mirrordirector.raspbian.org/raspbian/ jessie/main libzvbi-common all 0.2.35-3 [61.3 kB]
Get:27 http://mirrordirector.raspbian.org/raspbian/ jessie/main libzvbi0 armhf 0.2.35-3 [235 kB]
Get:28 http://mirrordirector.raspbian.org/raspbian/ jessie/main libcdaudio1 armhf 0.99.12p2-13 [46.3 kB]
Get:29 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgstreamer-plugins-bad0.10-0 armhf 0.10.23-7.4 [764 kB]
Get:30 http://mirrordirector.raspbian.org/raspbian/ jessie/main libkate1 armhf 0.4.1-4 [35.0 kB]
Get:31 http://mirrordirector.raspbian.org/raspbian/ jessie/main libmimic0 armhf 1.0.4-2.2 [13.7 kB]
Get:32 http://mirrordirector.raspbian.org/raspbian/ jessie/main libofa0 armhf 0.9.3-7 [44.4 kB]
Get:33 http://mirrordirector.raspbian.org/raspbian/ jessie/main libslv2-9 armhf 0.6.6+dfsg1-2 [24.9 kB]
Get:34 http://mirrordirector.raspbian.org/raspbian/ jessie/main libspandsp2 armhf 0.0.6-2 [237 kB]
Get:35 http://mirrordirector.raspbian.org/raspbian/ jessie/main libzbar0 armhf 0.10+doc-10+b2 [75.1 kB]
Get:36 http://mirrordirector.raspbian.org/raspbian/ jessie/main gstreamer0.10-plugins-base armhf 0.10.36-2 [1067 kB]
Get:37 http://mirrordirector.raspbian.org/raspbian/ jessie/main gstreamer0.10-plugins-bad armhf 0.10.23-7.4 [1874 kB]
Get:38 http://mirrordirector.raspbian.org/raspbian/ jessie/main gettext-base armhf 0.19.3-2 [116 kB]
Get:39 http://mirrordirector.raspbian.org/raspbian/ jessie/main autopoint all 0.19.3-2 [413 kB]
Get:40 http://mirrordirector.raspbian.org/raspbian/ jessie/main gettext armhf 0.19.3-2 [1167 kB]
Get:41 http://mirrordirector.raspbian.org/raspbian/ jessie/main intltool-debian all 0.35.0+20060710.1 [29.8 kB]
Get:42 http://mirrordirector.raspbian.org/raspbian/ jessie/main po-debconf all 1.0.16+nmu3 [220 kB]
Get:43 http://mirrordirector.raspbian.org/raspbian/ jessie/main debhelper all 9.20150101 [813 kB]
Get:44 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgirepository-1.0-1 armhf 1.42.0-2.2 [82.9 kB]
Get:45 http://mirrordirector.raspbian.org/raspbian/ jessie/main gir1.2-glib-2.0 armhf 1.42.0-2.2 [141 kB]
Get:46 http://mirrordirector.raspbian.org/raspbian/ jessie/main gir1.2-freedesktop armhf 1.42.0-2.2 [22.1 kB]
Get:47 http://mirrordirector.raspbian.org/raspbian/ jessie/main gir1.2-gstreamer-0.10 armhf 0.10.36-1.5 [674 kB]
Get:48 http://mirrordirector.raspbian.org/raspbian/ jessie/main gstreamer0.10-gconf armhf 0.10.31-3+nmu4 [706 kB]
Get:49 http://mirrordirector.raspbian.org/raspbian/ jessie/main gstreamer0.10-plugins-good armhf 0.10.31-3+nmu4 [1878 kB]
Get:50 http://mirrordirector.raspbian.org/raspbian/ jessie/main liba52-0.7.4 armhf 0.7.4-17 [28.9 kB]
Get:51 http://mirrordirector.raspbian.org/raspbian/ jessie/main libsidplay1 armhf 1.36.59-6 [60.6 kB]
Get:52 http://mirrordirector.raspbian.org/raspbian/ jessie/main libtwolame0 armhf 0.3.13-1.1 [47.3 kB]
Get:53 http://mirrordirector.raspbian.org/raspbian/ jessie/main gstreamer0.10-plugins-ugly armhf 0.10.19-2.1+b1 [390 kB]
Get:54 http://mirrordirector.raspbian.org/raspbian/ jessie/main gstreamer0.10-pulseaudio armhf 0.10.31-3+nmu4 [737 kB]
Get:55 http://mirrordirector.raspbian.org/raspbian/ jessie/main gstreamer0.10-x armhf 0.10.36-2 [621 kB]
Get:56 http://mirrordirector.raspbian.org/raspbian/ jessie/main libasprintf-dev armhf 0.19.3-2 [31.0 kB]
Get:57 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgettextpo-dev armhf 0.19.3-2 [128 kB]
Get:58 http://mirrordirector.raspbian.org/raspbian/ jessie/main libxml2-dev armhf 2.9.1+dfsg1-5+deb8u1 [615 kB]
Get:59 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgstreamer0.10-dev armhf 0.10.36-1.5 [1380 kB]
Get:60 http://mirrordirector.raspbian.org/raspbian/ jessie/main libsys-hostname-long-perl all 1.4-3 [11.6 kB]
Get:61 http://mirrordirector.raspbian.org/raspbian/ jessie/main libmail-sendmail-perl all 0.79.16-1 [26.6 kB]
Get:62 http://mirrordirector.raspbian.org/raspbian/ jessie/main libupnp6-dev armhf 1:1.6.19+git20141001-1 [201 kB]
Get:63 http://mirrordirector.raspbian.org/raspbian/ jessie/main libupnp-dev all 1:1.6.19+git20141001-1 [47.3 kB]
Get:64 http://mirrordirector.raspbian.org/raspbian/ jessie/main libvisual-0.4-plugins armhf 0.4.0.dfsg.1-7 [133 kB]
Fetched 30.6 MB in 16s (1908 kB/s)
Selecting previously unselected package libasprintf0c2:armhf.
(Reading database …
(Reading database … 5%
(Reading database … 10%
(Reading database … 15%
(Reading database … 20%
(Reading database … 25%
(Reading database … 30%
(Reading database … 35%
(Reading database … 40%
(Reading database … 45%
(Reading database … 50%
(Reading database … 55%
(Reading database … 60%
(Reading database … 65%
(Reading database … 70%
(Reading database … 75%
(Reading database … 80%
(Reading database … 85%
(Reading database … 90%
(Reading database … 95%
(Reading database … 100%
(Reading database … 67513 files and directories currently installed.)
Preparing to unpack …/libasprintf0c2_0.19.3-2_armhf.deb …
Unpacking libasprintf0c2:armhf (0.19.3-2) …
Selecting previously unselected package libaa1:armhf.
Preparing to unpack …/libaa1_1.4p5-43_armhf.deb …
Unpacking libaa1:armhf (1.4p5-43) …
Selecting previously unselected package libavc1394-0:armhf.
Preparing to unpack …/libavc1394-0_0.5.4-2_armhf.deb …
Unpacking libavc1394-0:armhf (0.5.4-2) …
Selecting previously unselected package libcdparanoia0:armhf.
Preparing to unpack …/libcdparanoia0_3.10.2+debian-11_armhf.deb …
Unpacking libcdparanoia0:armhf (3.10.2+debian-11) …
Selecting previously unselected package libdca0:armhf.
Preparing to unpack …/libdca0_0.0.5-7_armhf.deb …
Unpacking libdca0:armhf (0.0.5-7) …
Selecting previously unselected package libdirac-encoder0:armhf.
Preparing to unpack …/libdirac-encoder0_1.0.2-7.1_armhf.deb …
Unpacking libdirac-encoder0:armhf (1.0.2-7.1) …
Selecting previously unselected package libdv4:armhf.
Preparing to unpack …/libdv4_1.0.0-6_armhf.deb …
Unpacking libdv4:armhf (1.0.0-6) …
Selecting previously unselected package libdvdread4:armhf.
Preparing to unpack …/libdvdread4_5.0.0-1_armhf.deb …
Unpacking libdvdread4:armhf (5.0.0-1) …
Selecting previously unselected package libdvdnav4:armhf.
Preparing to unpack …/libdvdnav4_5.0.1-1_armhf.deb …
Unpacking libdvdnav4:armhf (5.0.1-1) …
Selecting previously unselected package libfftw3-double3:armhf.
Preparing to unpack …/libfftw3-double3_3.3.4-2+rvt_armhf.deb …
Unpacking libfftw3-double3:armhf (3.3.4-2+rvt) …
Selecting previously unselected package libflite1:armhf.
Preparing to unpack …/libflite1_1.4-release-12_armhf.deb …
Unpacking libflite1:armhf (1.4-release-12) …
Selecting previously unselected package libunistring0:armhf.
Preparing to unpack …/libunistring0_0.9.3-5.2_armhf.deb …
Unpacking libunistring0:armhf (0.9.3-5.2) …
Selecting previously unselected package libgettextpo0:armhf.
Preparing to unpack …/libgettextpo0_0.19.3-2_armhf.deb …
Unpacking libgettextpo0:armhf (0.19.3-2) …
Selecting previously unselected package libiec61883-0:armhf.
Preparing to unpack …/libiec61883-0_1.2.0-0.2_armhf.deb …
Unpacking libiec61883-0:armhf (1.2.0-0.2) …
Selecting previously unselected package libmhash2:armhf.
Preparing to unpack …/libmhash2_0.9.9.9-7_armhf.deb …
Unpacking libmhash2:armhf (0.9.9.9-7) …
Selecting previously unselected package libmpeg2-4:armhf.
Preparing to unpack …/libmpeg2-4_0.5.1-7_armhf.deb …
Unpacking libmpeg2-4:armhf (0.5.1-7) …
Selecting previously unselected package libopencore-amrnb0:armhf.
Preparing to unpack …/libopencore-amrnb0_0.1.3-2.1_armhf.deb …
Unpacking libopencore-amrnb0:armhf (0.1.3-2.1) …
Selecting previously unselected package libopencore-amrwb0:armhf.
Preparing to unpack …/libopencore-amrwb0_0.1.3-2.1_armhf.deb …
Unpacking libopencore-amrwb0:armhf (0.1.3-2.1) …
Selecting previously unselected package libraptor2-0:armhf.
Preparing to unpack …/libraptor2-0_2.0.14-1_armhf.deb …
Unpacking libraptor2-0:armhf (2.0.14-1) …
Selecting previously unselected package librasqal3:armhf.
Preparing to unpack …/librasqal3_0.9.32-1_armhf.deb …
Unpacking librasqal3:armhf (0.9.32-1) …
Selecting previously unselected package librdf0:armhf.
Preparing to unpack …/librdf0_1.0.17-1+b1_armhf.deb …
Unpacking librdf0:armhf (1.0.17-1+b1) …
Selecting previously unselected package libsoundtouch0:armhf.
Preparing to unpack …/libsoundtouch0_1.8.0-1_armhf.deb …
Unpacking libsoundtouch0:armhf (1.8.0-1) …
Selecting previously unselected package libvisual-0.4-0:armhf.
Preparing to unpack …/libvisual-0.4-0_0.4.0-6_armhf.deb …
Unpacking libvisual-0.4-0:armhf (0.4.0-6) …
Selecting previously unselected package libvo-aacenc0:armhf.
Preparing to unpack …/libvo-aacenc0_0.1.3-1_armhf.deb …
Unpacking libvo-aacenc0:armhf (0.1.3-1) …
Selecting previously unselected package libvo-amrwbenc0:armhf.
Preparing to unpack …/libvo-amrwbenc0_0.1.3-1_armhf.deb …
Unpacking libvo-amrwbenc0:armhf (0.1.3-1) …
Selecting previously unselected package libzvbi-common.
Preparing to unpack …/libzvbi-common_0.2.35-3_all.deb …
Unpacking libzvbi-common (0.2.35-3) …
Selecting previously unselected package libzvbi0:armhf.
Preparing to unpack …/libzvbi0_0.2.35-3_armhf.deb …
Unpacking libzvbi0:armhf (0.2.35-3) …
Selecting previously unselected package libcdaudio1.
Preparing to unpack …/libcdaudio1_0.99.12p2-13_armhf.deb …
Unpacking libcdaudio1 (0.99.12p2-13) …
Selecting previously unselected package libgstreamer-plugins-bad0.10-0:armhf.
Preparing to unpack …/libgstreamer-plugins-bad0.10-0_0.10.23-7.4_armhf.deb …
Unpacking libgstreamer-plugins-bad0.10-0:armhf (0.10.23-7.4) …
Selecting previously unselected package libkate1.
Preparing to unpack …/libkate1_0.4.1-4_armhf.deb …
Unpacking libkate1 (0.4.1-4) …
Selecting previously unselected package libmimic0.
Preparing to unpack …/libmimic0_1.0.4-2.2_armhf.deb …
Unpacking libmimic0 (1.0.4-2.2) …
Selecting previously unselected package libofa0.
Preparing to unpack …/libofa0_0.9.3-7_armhf.deb …
Unpacking libofa0 (0.9.3-7) …
Selecting previously unselected package libslv2-9.
Preparing to unpack …/libslv2-9_0.6.6+dfsg1-2_armhf.deb …
Unpacking libslv2-9 (0.6.6+dfsg1-2) …
Selecting previously unselected package libspandsp2:armhf.
Preparing to unpack …/libspandsp2_0.0.6-2_armhf.deb …
Unpacking libspandsp2:armhf (0.0.6-2) …
Selecting previously unselected package libzbar0.
Preparing to unpack …/libzbar0_0.10+doc-10+b2_armhf.deb …
Unpacking libzbar0 (0.10+doc-10+b2) …
Selecting previously unselected package gstreamer0.10-plugins-base:armhf.
Preparing to unpack …/gstreamer0.10-plugins-base_0.10.36-2_armhf.deb …
Unpacking gstreamer0.10-plugins-base:armhf (0.10.36-2) …
Selecting previously unselected package gstreamer0.10-plugins-bad:armhf.
Preparing to unpack …/gstreamer0.10-plugins-bad_0.10.23-7.4_armhf.deb …
Unpacking gstreamer0.10-plugins-bad:armhf (0.10.23-7.4) …
Selecting previously unselected package gettext-base.
Preparing to unpack …/gettext-base_0.19.3-2_armhf.deb …
Unpacking gettext-base (0.19.3-2) …
Selecting previously unselected package autopoint.
Preparing to unpack …/autopoint_0.19.3-2_all.deb …
Unpacking autopoint (0.19.3-2) …
Selecting previously unselected package gettext.
Preparing to unpack …/gettext_0.19.3-2_armhf.deb …
Unpacking gettext (0.19.3-2) …
Selecting previously unselected package intltool-debian.
Preparing to unpack …/intltool-debian_0.35.0+20060710.1_all.deb …
Unpacking intltool-debian (0.35.0+20060710.1) …
Selecting previously unselected package po-debconf.
Preparing to unpack …/po-debconf_1.0.16+nmu3_all.deb …
Unpacking po-debconf (1.0.16+nmu3) …
Selecting previously unselected package debhelper.
Preparing to unpack …/debhelper_9.20150101_all.deb …
Unpacking debhelper (9.20150101) …
Selecting previously unselected package libgirepository-1.0-1:armhf.
Preparing to unpack …/libgirepository-1.0-1_1.42.0-2.2_armhf.deb …
Unpacking libgirepository-1.0-1:armhf (1.42.0-2.2) …
Selecting previously unselected package gir1.2-glib-2.0:armhf.
Preparing to unpack …/gir1.2-glib-2.0_1.42.0-2.2_armhf.deb …
Unpacking gir1.2-glib-2.0:armhf (1.42.0-2.2) …
Selecting previously unselected package gir1.2-freedesktop:armhf.
Preparing to unpack …/gir1.2-freedesktop_1.42.0-2.2_armhf.deb …
Unpacking gir1.2-freedesktop:armhf (1.42.0-2.2) …
Selecting previously unselected package gir1.2-gstreamer-0.10.
Preparing to unpack …/gir1.2-gstreamer-0.10_0.10.36-1.5_armhf.deb …
Unpacking gir1.2-gstreamer-0.10 (0.10.36-1.5) …
Selecting previously unselected package gstreamer0.10-gconf:armhf.
Preparing to unpack …/gstreamer0.10-gconf_0.10.31-3+nmu4_armhf.deb …
Unpacking gstreamer0.10-gconf:armhf (0.10.31-3+nmu4) …
Selecting previously unselected package gstreamer0.10-plugins-good:armhf.
Preparing to unpack …/gstreamer0.10-plugins-good_0.10.31-3+nmu4_armhf.deb …
Unpacking gstreamer0.10-plugins-good:armhf (0.10.31-3+nmu4) …
Selecting previously unselected package liba52-0.7.4.
Preparing to unpack …/liba52-0.7.4_0.7.4-17_armhf.deb …
Unpacking liba52-0.7.4 (0.7.4-17) …
Selecting previously unselected package libsidplay1.
Preparing to unpack …/libsidplay1_1.36.59-6_armhf.deb …
Unpacking libsidplay1 (1.36.59-6) …
Selecting previously unselected package libtwolame0.
Preparing to unpack …/libtwolame0_0.3.13-1.1_armhf.deb …
Unpacking libtwolame0 (0.3.13-1.1) …
Selecting previously unselected package gstreamer0.10-plugins-ugly:armhf.
Preparing to unpack …/gstreamer0.10-plugins-ugly_0.10.19-2.1+b1_armhf.deb …
Unpacking gstreamer0.10-plugins-ugly:armhf (0.10.19-2.1+b1) …
Selecting previously unselected package gstreamer0.10-pulseaudio:armhf.
Preparing to unpack …/gstreamer0.10-pulseaudio_0.10.31-3+nmu4_armhf.deb …
Unpacking gstreamer0.10-pulseaudio:armhf (0.10.31-3+nmu4) …
dpkg: error processing archive /var/cache/apt/archives/gstreamer0.10-pulseaudio_0.10.31-3+nmu4_armhf.deb (–unpack):
error setting permissions of `./usr/share/doc/gstreamer0.10-pulseaudio/changelog.Debian.gz‘: Read-only file system
dpkg: error while cleaning up:
unable to remove newly-extracted version of `/usr/share/doc/gstreamer0.10-pulseaudio/changelog.Debian.gz‘: Read-only file system
dpkg: error while cleaning up:
unable to remove newly-extracted version of `/usr/share/doc/gstreamer0.10-pulseaudio/NEWS.gz‘: Read-only file system
dpkg: error while cleaning up:
unable to remove newly-extracted version of `/usr/share/doc/gstreamer0.10-pulseaudio/README.gz‘: Read-only file system
dpkg: error while cleaning up:
unable to remove newly-extracted version of `/usr/share/doc/gstreamer0.10-pulseaudio/copyright‘: Read-only file system
dpkg: error while cleaning up:
unable to remove newly-extracted version of `/usr/share/doc/gstreamer0.10-pulseaudio/README.Debian‘: Read-only file system
dpkg: error while cleaning up:
unable to remove newly-extracted version of `/usr/share/doc/gstreamer0.10-pulseaudio/AUTHORS‘: Read-only file system
dpkg: error while cleaning up:
unable to remove newly-installed version of `/usr/share/doc/gstreamer0.10-pulseaudio‘: Read-only file system
dpkg: error while cleaning up:
unable to securely remove ‚/var/lib/dpkg/tmp.ci‘: Read-only file system
dpkg: error while cleaning up:
unable to securely remove ‚/var/lib/dpkg/reassemble.deb‘: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/gstreamer0.10-x_0.10.36-2_armhf.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libasprintf-dev_0.19.3-2_armhf.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libgettextpo-dev_0.19.3-2_armhf.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libxml2-dev_2.9.1+dfsg1-5+deb8u1_armhf.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
dpkg: error processing archive /var/cache/apt/archives/libgstreamer0.10-dev_0.10.36-1.5_armhf.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libsys-hostname-long-perl_1.4-3_all.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libmail-sendmail-perl_0.79.16-1_all.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libupnp6-dev_1%3a1.6.19+git20141001-1_armhf.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libupnp-dev_1%3a1.6.19+git20141001-1_all.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
dpkg: error processing archive /var/cache/apt/archives/libvisual-0.4-plugins_0.4.0.dfsg.1-7_armhf.deb (–unpack):
error ensuring `/var/lib/dpkg/reassemble.deb‘ doesn’t exist: Read-only file system
Processing triggers for man-db (2.7.0.2-5) …
dpkg: unrecoverable fatal error, aborting:
unable to flush updated status of `man-db‘: Read-only file system5. Mai 2016 at 10:15 #20056Have upgraded to 2.31. But gmediarenderer installation fails. See below.
/tmp /var/www/max2play/public
Reading package lists…
Building dependency tree…
Reading state information…
autoconf is already the newest version.
automake is already the newest version.
libtool is already the newest version.
The following packages were automatically installed and are no longer required:
libauthen-sasl-perl libencode-locale-perl libfile-listing-perl
libfont-afm-perl libhtml-form-perl libhtml-format-perl libhtml-parser-perl
libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl
libhttp-daemon-perl libhttp-date-perl libhttp-message-perl
libhttp-negotiate-perl libio-html-perl libio-socket-ssl-perl libjpeg-progs
libjpeg9 liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl
libnet-http-perl libnet-smtp-ssl-perl libnet-ssleay-perl liburi-perl
libwww-perl libwww-robotrules-perl xscreensaver-data
Use ‚apt-get autoremove‘ to remove them.
0 upgraded, 0 newly installed, 0 to remove and 52 not upgraded.
Reading package lists…
Building dependency tree…
Reading state information…
gstreamer0.10-alsa is already the newest version.
gstreamer0.10-alsa set to manually installed.
The following packages were automatically installed and are no longer required:
libauthen-sasl-perl libencode-locale-perl libfile-listing-perl
libfont-afm-perl libhtml-form-perl libhtml-format-perl libhtml-parser-perl
libhtml-tagset-perl libhtml-tree-perl libhttp-cookies-perl
libhttp-daemon-perl libhttp-date-perl libhttp-message-perl
libhttp-negotiate-perl libio-html-perl libio-socket-ssl-perl libjpeg-progs
libjpeg9 liblwp-mediatypes-perl liblwp-protocol-https-perl libmailtools-perl
libnet-http-perl libnet-smtp-ssl-perl libnet-ssleay-perl liburi-perl
libwww-perl libwww-robotrules-perl xscreensaver-data
Use ‚apt-get autoremove‘ to remove them.
The following extra packages will be installed:
autopoint debhelper freepats gettext gettext-base gir1.2-freedesktop
gir1.2-glib-2.0 gir1.2-gstreamer-0.10 gstreamer0.10-gconf gstreamer0.10-x
intltool-debian liba52-0.7.4 libaa1 libasprintf-dev libasprintf0c2
libavc1394-0 libcdaudio1 libcdparanoia0 libdca0 libdirac-encoder0 libdv4
libdvdnav4 libdvdread4 libfftw3-double3 libflite1 libgettextpo-dev
libgettextpo0 libgirepository-1.0-1 libgme0 libgstreamer-plugins-bad0.10-0
libiec61883-0 libkate1 libmail-sendmail-perl libmhash2 libmimic0 libmms0
libmodplug1 libmpcdec6 libmpeg2-4 libofa0 libopenal-data libopenal1
libopencore-amrnb0 libopencore-amrwb0 libraptor2-0 librasqal3 librdf0
libshout3 libsidplay1 libslv2-9 libsoundtouch0 libspandsp2
libsys-hostname-long-perl libtwolame0 libunistring0 libupnp6 libupnp6-dev
libvisual-0.4-0 libvisual-0.4-plugins libvo-aacenc0 libvo-amrwbenc0
libwavpack1 libwildmidi-config libwildmidi1 libxml2-dev libzbar0
libzvbi-common libzvbi0 po-debconf
Suggested packages:
dh-make gettext-doc frei0r-plugins libdv-bin oss-compat libdvdcss2
libfftw3-bin libfftw3-dev gstreamer0.10-doc libportaudio2 raptor2-utils
rasqal-utils librdf-storage-postgresql librdf-storage-mysql
librdf-storage-sqlite librdf-storage-virtuoso redland-utils sidplay-base
xsidplay slv2-jack libupnp6-doc libmail-box-perl
The following NEW packages will be installed:
autopoint debhelper freepats gettext gettext-base gir1.2-freedesktop
gir1.2-glib-2.0 gir1.2-gstreamer-0.10 gstreamer0.10-gconf
gstreamer0.10-plugins-bad gstreamer0.10-plugins-base
gstreamer0.10-plugins-good gstreamer0.10-plugins-ugly
gstreamer0.10-pulseaudio gstreamer0.10-x intltool-debian liba52-0.7.4 libaa1
libasprintf-dev libasprintf0c2 libavc1394-0 libcdaudio1 libcdparanoia0
libdca0 libdirac-encoder0 libdv4 libdvdnav4 libdvdread4 libfftw3-double3
libflite1 libgettextpo-dev libgettextpo0 libgirepository-1.0-1 libgme0
libgstreamer-plugins-bad0.10-0 libgstreamer0.10-dev libiec61883-0 libkate1
libmail-sendmail-perl libmhash2 libmimic0 libmms0 libmodplug1 libmpcdec6
libmpeg2-4 libofa0 libopenal-data libopenal1 libopencore-amrnb0
libopencore-amrwb0 libraptor2-0 librasqal3 librdf0 libshout3 libsidplay1
libslv2-9 libsoundtouch0 libspandsp2 libsys-hostname-long-perl libtwolame0
libunistring0 libupnp-dev libupnp6 libupnp6-dev libvisual-0.4-0
libvisual-0.4-plugins libvo-aacenc0 libvo-amrwbenc0 libwavpack1
libwildmidi-config libwildmidi1 libxml2-dev libzbar0 libzvbi-common libzvbi0
po-debconf
0 upgraded, 76 newly installed, 0 to remove and 52 not upgraded.
Need to get 434 kB/60.4 MB of archives.
After this operation, 102 MB of additional disk space will be used.
Do you want to continue? [Y/n] Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libfftw3-double3 armhf 3.3.4-2+rpi1
404 Not Found [IP: 5.153.225.207 80]
checking for a BSD-compatible install… /usr/bin/install -c
checking whether build environment is sane… yes
checking for a thread-safe mkdir -p… /bin/mkdir -p
checking for gawk… no
checking for mawk… mawk
checking whether make sets $(MAKE)… yes
checking whether make supports nested variables… yes
checking for style of include used by make… GNU
checking for gcc… gcc
checking whether the C compiler works… yes
checking for C compiler default output file name… a.out
checking for suffix of executables…
checking whether we are cross compiling… no
checking for suffix of object files… o
checking whether we are using the GNU C compiler… yes
checking whether gcc accepts -g… yes
checking for gcc option to accept ISO C89… none needed
checking whether gcc understands -c and -o together… yes
checking dependency style of gcc… gcc3
checking for special C compiler options needed for large files… no
checking for _FILE_OFFSET_BITS value needed for large files… 64
checking for gcc… (cached) gcc
checking whether we are using the GNU C compiler… (cached) yes
checking whether gcc accepts -g… (cached) yes
checking for gcc option to accept ISO C89… (cached) none needed
checking whether gcc understands -c and -o together… (cached) yes
checking dependency style of gcc… (cached) gcc3
checking for gcc option to accept ISO C99… -std=gnu99
checking for gcc -std=gnu99 option to accept ISO Standard C… (cached) -std=gnu99
checking whether make sets $(MAKE)… (cached) yes
checking for asprintf… yes
checking for exp in -lm… yes
checking for pkg-config… /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0… yes
checking for GLIB… yes
checking for GST… no
checking for GST… no
checking for LIBUPNP… no
checking how to run the C preprocessor… gcc -std=gnu99 -E
checking for grep that handles long lines and -e… /bin/grep
checking for egrep… /bin/grep -E
checking for ANSI C header files… yes
checking that generated files are newer than configure… done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating config.h
config.status: executing depfiles commands
make all-recursive
make[1]: Entering directory ‚/tmp/gmrender-resurrect‘
Making all in src
make[2]: Entering directory ‚/tmp/gmrender-resurrect/src‘
(echo „#define GM_COMPILE_VERSION \“2016-03-27_48caaa4\““ > git-version.h-new; \
cmp -s git-version.h git-version.h-new || cp git-version.h-new git-version.h; \
rm git-version.h-new)
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DPKG_DATADIR=\“/usr/local/share/gmediarender\“ -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wwrite-strings -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
Makefile:382: recipe for target ‚main.o‘ failed
make[2]: Leaving directory ‚/tmp/gmrender-resurrect/src‘
Makefile:355: recipe for target ‚all-recursive‘ failed
make[1]: Leaving directory ‚/tmp/gmrender-resurrect‘
Makefile:295: recipe for target ‚all‘ failed
Making install in src
make[1]: Entering directory ‚/tmp/gmrender-resurrect/src‘
(echo „#define GM_COMPILE_VERSION \“2016-03-27_48caaa4\““ > git-version.h-new; \
cmp -s git-version.h git-version.h-new || cp git-version.h-new git-version.h; \
rm git-version.h-new)
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DPKG_DATADIR=\“/usr/local/share/gmediarender\“ -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wwrite-strings -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
Makefile:382: recipe for target ‚main.o‘ failed
make[1]: Leaving directory ‚/tmp/gmrender-resurrect/src‘
Makefile:355: recipe for target ‚install-recursive‘ failed24. April 2016 at 13:12 #19932Hi. I do not know what the source of the problem was – but I wiped the sd card and reinstalled max2play and the problem went away.
Not sure worth pursuing, especially noting that gmediarender seems to be gone from v2.29 and you’re recommending using the dlna option in Squeezeserver.NB, the reason the squeezebox dlna solution isn’t necessarily great is that the UPnP/dlna plugin in Squeezeserver is incompatible with having password security on the server, which you sort of want if you are going to make it accessible through your firewall for remote access.
Thanks for your help anyway.
23. April 2016 at 13:39 #19919Yes I mean the gmediarender DNLA-client in max2play, not the one in Squeezebox Server. I do know how to set the outputs to the correct one and had done so and it makes no difference – I thouht I made that clear, sorry if it wasn’t. As I said I even set it force HDMI as well. None of this makes any difference – it ignores all the settings and plays throught the hifiberry anyway.
Solution please?
2. März 2016 at 1:14 #18959Thanks. FYI I was using 7.8.0. I upgraded LMS to the 7.9 nightly and the problem solved itself without making any further changes.
1. März 2016 at 12:14 #18887Hi guys – this is a serious support request. can I please have a response?
15. Januar 2016 at 14:54 #17899flysurfer – I added the -D commandline option but iot does not make any difference. Although I can see the similarity to DoP this is not DSD encoded flac but rather DTS. That may be important. Do you have any other thoughts on this? It must be possible as passthrough is pretty routine – e.g. Kodi in max2play can do it! And as I said before pic***pl**er could do this until they broke it without explanation.
Thanks again for all your help.
21. Oktober 2015 at 13:00 #16463Hi Maximillian
So sorry if I was not clear. I was not talking about losing quality with hi-res flac. I have hi-res audio enabled over HDMI and it works perfectly!
This is what I mean by DTS passthrough.
It is possible to embed a 5.1 DTS stream in a flac wrapper (not limited to 5.1), which LMS and squeezebox see as a „normal“ flac file. A Squeezebox connected to a surround amplifier via coax or s/pdif will pass this file unconverted to the surround amplifer provided the Squeezebox is in passthrough mode, which is enabled by setting the output volume to be fixed at 100%. The amplifier identifies the DTS (or AC3) stream and handles it accordingly. This is a very cool feature of Squeezebox that is relatively unknown but allows those of us who have surround sound mixes of treasured albums to add these to our Squeezebox library and play them like any other album.
The DTS files can be ripped from the „video“ part of any DVD-Audio or audio bluray (or created from the lossless multichannel these discs may also have if you have expensive DTS conversion software). I have many such files (e.g the King Crimson 40th Anniversary Series, etc.) which play perfectly in 5.1 DTS using a Squeezebox Touch.
The embedding is done using a python script. As the link below states: „spdifconvert.py is a Python script which takes as input an AC3 or DTS file (sourced from a DVD) and encapsulates it in an IEC61937 stream. This stream is then wrapped in a WAV file which can be played over an S/PDIF link with no modifications (ie no volume adjustments); a digital receiver will be able to interpret the AC3 or DTS data contained within this stream (assuming the receiver knows the AC3/DTS formats).“
The script works perfectly to produce a WAV file with DTS embedded in it. You can then convert this WAV file to flac using flac.exe in the normal way, which does not actually compress the file further but the flac wrapper allows you to add the meta data to the file to catalog it with LMS as you would any other music file.
More details are given here:
Your implementation of squeezelite in max2play (I have v2.23) must modify the stream in some way, because these DTS-encoded files just produce „white“ noise over HDMI. Although I do not understand the finer technicalities I believe the key is that the player passes the stream to the amplifer completely unmodified.
I know that passthrough of these files over HDMI is possible with Squeezelite, because this works on picorep***er up to v 1.18b (sorry to keep referring to an inferior rival!), but the writers of that software seem to have broken the function since then and do not seem to be interested in answering my question as to whether they intend to fix it. I think the code is available at sourceforge. Max2Play is much cooler and more versatile and it would be great if it added this function.
I hope this helps. I can provide you with an example DTS-encoded flac file if that would help.
Best regards
Dan
ps If you want to get the hang of these DTS-flac files, foobar can deal with them perfectly happily. With the DTS component enabled foobar identifies the DTS stream in the flac file and converts it on the PC. But if you want to use the higher quality conversion of your surround amp you can perform a similar trick of passing the DTS direct to the amp by simply removing the foobar DTS component. In this case you will get „white“ noise if you try and play the file direct to speakers attached to the PC but if your PC is attached to a surround amp via HDMI then foobar does not attempt to read the file but simply sends the flac file to the amp unaltered.
-
This reply was modified 9 years ago by
d4n3ll.
20. Oktober 2015 at 13:51 #16442Hi Maximillian
Really sorry about the slow response – I’ve been away.
I’m also afraid I have no technical knowledge – I’m just a user, noyt a programmer. I know that picorep****r uses squeezelite too and could do passthrough (check out v 1.18b). As with hardware squeezeboxes it was initiated by setting output volume to 100%, but that’s simply an interface issue I guess.
Clearly passthrough of DTS-enocoded flac over HDMI is generally feasible as the kodi installation in max2play already does it. But it would be so cool if you could add it to your squeezelite implementation.
Best regards
Dan
-
This reply was modified 9 years ago by
-
