Forum Replies Created
-
12. Oktober 2016 at 12:12 #23390
Hello Teetertank,
We worked on this issue. Thanks for your advice. The problem should be solved. Please try the newer version from our download site.
Best Regards.
12. Oktober 2016 at 11:59 #23387Hello tom74,
The cubox is not a supported device. You can try to adjust the install script from our github ( >> here << ). But I recommend the debian wheezy version for this Cubox.
Best Regards
12. Oktober 2016 at 11:50 #23386Hello Spaetzle,
please try this. Go to the HiFiBerry menu. I think there is, at this time, the Hifiberry Digi/Digi+ the chosen sound card? Change it into none and save this configuration. After this, change it again into Hifiberry Digi/Digi+.
We have test it and this solves the problem for the moment. We are working on this.
Best Regards
12. Oktober 2016 at 11:45 #23385Hello Megantonneke,
Many thanks for share your experiences with the LG Flatron L1510SF (15″ @ 1024×768) with touch-output via USB and Max2Play with the community.
12. Oktober 2016 at 11:41 #23384Hello Jumalolento,
Thanks for your request.
It is not possible to use a soundcard with a 2.8″ touch display.
It is possible to use more than one soundcard. It is also possible to use a usb dac and a 2.8″ touch display.Or you take the >>> original Raspberry Pi 7″ touch display from our shop <<<. This touch screen is not connected with the gpio pins as you can see >>here<<. (it is a possible setup with the Raspberry Pi, the touch screen and a HifiBerry sound card)
Best Regards
12. Oktober 2016 at 11:23 #23382Hello Staudie,
Sorry for the late response.
I see that your problem with the stream and the hifiberry is solved with another post of you in another forum.
http://forums.slimdevices.com/showthread.php?106187-48kbps-CBR-AAC-streams-not-working
I would like to thank ralphi for this help.
Best Regards
12. Oktober 2016 at 11:16 #23381Hello shamot,
Thanks for your advice! You are right with this bug which you have found.
We are working to solve this and in the next version it will be fixed.Thank you very much.
Additionally thank you TJH for solve Justinks problem.
Best Regards.
12. Oktober 2016 at 10:33 #23379Schön zu hören. Danke für deine Geduld und das du dein Ergebnis mit der Community teilst.
Beste Grüße
11. Oktober 2016 at 11:46 #23372Hallo axarix,
Danke für deine Anfrage und Willkommen im Forum.
Schau bitte in die Browsereinstellungen. -> Einstellungen -> Inhalt -> Sprachen (Bevorzugte Sprachen für die Darstellung von Websites wählen) -> dort dann Deutsch (de) nach oben rücken. Zusätzlich überprüfe die Ausgabe der Sprache durch das Gerät unter -> Einstellungen (Settings).
Beste Grüße
———————-
Please take a look at the browser settings. -> Settings -> Content -> Languages (select preferred languages for the display of websites) -> then put German (de) up. In addition, take a look at the output of the language by the device under -> Settings.
11. Oktober 2016 at 9:40 #23367Hallo lucky51179,
kannst du mir bitte mal deine Vorgehensweise schildern?
Hast du das Dateisystem bereits expandiert? (danach bitte einen Neustart durchführen)
Hast du bereits ein Update der Max2Play Version auf die aktuellste Version durchgeführt? (Version 2.37)
Existieren mehrere Squeezeboxen in deinem Heimnetzwerk?—————————
Can you please describe your procedure please?
Have you already expanded the file system? (Please reboot after it)
Have you already updated the Max2Play version to the latest version? (Version 2.37)
Are there multiple squeeze boxes in your home network?11. Oktober 2016 at 9:28 #23366Hello Spaetzle,
Thanks for your request. Did you reboot the system after choose the HiFiBerry Digi+ in the HiFiBerry plugin menu?
Best Regards
10. Oktober 2016 at 14:13 #23351Hallo lucky51179,
Welche Version des Squeezebox Servers hast du installiert?
Versuch doch bitte mal einen Neustart des Squeezebox Servers bzw. des Max2Play Gerätes.
Beste Grüße
—————————
Which version of the Squeezebox server do you have installed?
Please try a restart of the Squeezebox server or/and the Max2Play device.
Best Regards
10. Oktober 2016 at 13:55 #23344Hello Eyerex,
Thanks for your request and sorry for the late response.
try this – default Explorer² USB DAC, USB Audio – Default Audio Device, CARD=DAC
If you take a look into the DEBUG informations, while you playback a song, you can see whith which soundquality the files will be played.
Best Regards
10. Oktober 2016 at 13:45 #23343Hallo boobyone,
Danke für deine Anfrage.
Ein Display diesen Typs haben wir nicht vor Ort und können deshalb dafür keinen Support geben. Möglicherweise kann dir aber jemand aus der Community helfen oder du teilst deine Erfahrungen mit dem Display. Somit profitiert die gesamte Community davon.
Max2Play ist für FritzBoxen ausgelegt. Eine FritzBox besitzt bereits die Funktionalität der integrierten Zeitschaltuhr. Das Max2Play Gerät sucht bei nicht verbundenem WLAN lediglich nach dem bereits bekanntem Router. Der Stromverbrauch dabei ist äußerst gering.
Beste Grüße
———————————–
Dear bobbyone,Thanks for your request.
We do not have a display of this type and therefore we can not give technical support for this. Maybe someone from the community can help you or you share your experiences with the display. Thus, the entire community benefits from it.
Max2Play is designed for FritzBox router. A FritzBox already has the functionality of the integrated timer. The Max2Play device only search for already known router if the wifi is disconnected. The consumption of electricity is extremely low.
10. Oktober 2016 at 13:37 #23342Hello rjr,
Thanks for your request and apologies the late response.
Maybe this is a good help for you. If you have more questions, which are not in this articles, please write again in this topic.
Build a multiroom audio system with Max2Play
Best Regards
10. Oktober 2016 at 13:10 #23340Hello romanu,
Thanks for your request.
Did you change the soundcard output under Audioplayer > Squeezelite > Advanced Settings ?
Best Regards
10. Oktober 2016 at 13:03 #23339Hallo Hoelgi,
Danke für deine Anfrage.
Welche Version läuft auf dem Raspberry Pi Zero?
Hast du bereits das Dateisystem expandiert?
Welche Änderungen wurden noch vorgenommen?Beste Grüße
———————————-
Question: I have a problem with the Squeezebox player on a Raspberry Pi Zero: After switching on everything seems to be booted normally. The Squeeze Ctrl app finds the player, but it can not play anything. The status briefly changes from Stop to Play and then again to Stop. There is no sound. After a reboot it runs normally.On a Raspberry pi 2 runs the same configuration without problems
———————————-
Answer:
Which version is running on the Raspberry Pi Zero?
Have you already expanded the file system?
What changes have been made?Best Regards
10. Oktober 2016 at 12:48 #23337Hello hermano,
Thanks for your request.
Did you choose already a player in the squeezebox menu?
10. Oktober 2016 at 12:44 #23336Hello phamd4,
Normally you only take the Touchscreen Image and then you can use it without any configurations. Only if you start Jivelite for the first time you have to choose the „joggler skin“ (not in the Max2Play browserinterface, but in Jivelite). I test it and it works fine with Max2Play version 2.35 (2.36 & 2.37) and an official Raspberry Pi 7″ touch display.
Best Regards
10. Oktober 2016 at 12:08 #23334Hello bombadil79,
please update your Max2Play device to version 2.37.
I have test it for you and cannot get the same issue. Maybe the cable is broken or something went wrong with your active speaker? Could you test it with other speaker?
10. Oktober 2016 at 11:22 #23332Entschuldige die späte Antwort.
Du kannst entweder mit dem Gerät, welches mit dem Access Point verbunden ist, auf das Max2Play Browserinterface zugreifen oder wenn du ein LAN-Kabel ansteckst auch mit deinem PC auf das Max2Play Gerät zugreifen und den Access Point deaktiveren und bearbieten.
Die WLAN-Einstellungen bleiben soweit erhalten, da diese in einem separaten Menü gespeichert werden. Deaktivierst du den Access Point verbindet sich dein Gerät wieder wie gewohnt mit deinem Router.
Beste Grüße
—————————————————–
Sorry for the late reply.
You can either access the Max2Play browser interface with the connected device or if you connect a LAN cable to the Max2Play device with your PC to disable or control the access point.
The WLAN settings are saved in a separate menu. If you deactivate the access point your device connects again as usual with your router.
Best Regards
29. September 2016 at 16:57 #23258Hello Landry,
Sorry for the late response.
Under the Raspberry menu you can change the soundoutput into – „default (hdmi if connected)“; „hdmi“ and „jack“. If you choose „default“ and install the plugin for your sound card (hifiberry or iqaudio) then it should work.
29. September 2016 at 16:54 #23257Hello phamd4,
actually not. But one of our Max2Play user is working on something like this. Maybe you should take a look in this topic:
It is only in german available. But if the project is reade, we will add an english version.
Best Regards
25. September 2016 at 15:18 #23186Hallo paco668 und Andre,
Danke für den Hinweis. Wie paco668 es schon richtig erkannt hat, die wichtigen GPIO-Pins bei der IQaudIO Digi-AMP+ ist wie folgt: auf dem 5. Pin (5V) und auf dem 8. bzw. 10. (GROUND). In unserem Wiki haben wir dafür bereits einen Eintrag erstellt gehabt.
https://www.max2play.com/en/wiki/7-touch-screen-connect-the-gpio/
Beste Grüße
————————————–
Thanks for the note. How paco668 it has been correctly identified, the important GPIO pins on the IQaudIO Digi-AMP + is as follow: at the 5th pin (5V) and on the 8th or 10th (GROUND). In our wiki, we have had already created an entry.
https://www.max2play.com/en/wiki/7-touch-screen-connect-the-gpio/
Best Regards
22. September 2016 at 13:33 #23155Hello asplundj,
We try it a several times. And it works fine. It could be a problem with your internet connection, because it seems it having no connection to github – error: Failed connect to github.com:443
22. September 2016 at 13:29 #23154Hello phamd4,
If you have logged in with Facebook, this can occures this issue. The triode spotify addon is a 3rd party plugin and is not officially supported from spotify.
I had the same problem. I contact spotify via facebook. They change my account into a normal user account without facebook connection. They transferred my playlists, too. And they were very fast. I contact them about the spotify facebook support. Since that I can login without any problems and I didn’t need a device id.
Best Regards
22. September 2016 at 13:13 #23152Hello bombadil79,
Which image do you use?
Which max2play version do you use?
Did you choose your soundcard in the hifiberry menu? And reboot max2play after it?
22. September 2016 at 13:07 #23151Hello ArnieG,
Thanks for your request.
The IR-Support is already given in Squeezelite. Here you have to set
-i LIRC-Configfilein the commandline options and set a cross into ‚update squeezelite‘. This you can find in the advanced settings of squeezelite in the audioplayer menu.Then it is possible to control the server over jivelite.
Best Regards
22. September 2016 at 13:02 #23150Hallo Mito1661,
Der SD-Kartenschreibschutz als Plugin ist im wesentlichen für den Raspberry Pi ausgelegt. Auf dem Odroid C1+ kann es daher zu Problemen führen.
Entschuldige bitte die Schwierigkeiten.
Beste Grüße
——————————
The SD card write protection as plugin is designed essentially for the Raspberry Pi. On the ODROID C1 + it is possible to have some issues.Please excuse the difficulties.
Best regards
-
