chicoinm

Forum Replies Created

Viewing 18 posts - 1 through 18 (of 18 total)
  • 23. April 2020 at 23:14 #48600

    Did you try to erase the library and rescan everything?

    3. April 2018 at 13:23 #34945

    I turn it off.

    29. März 2018 at 21:53 #34910

    Also, music continues even if the phone is turned off. Is this an expected behaviour?

    29. März 2018 at 14:08 #34900

    Ok this is very weird… First I found out that I had to install the „bugfix for shairtunes2“ in Max2play. I installed it and so the Shairtunes2 plugin loaded correctly in LMS. It still does not work with Allconnect (it seems to play correctly but no sound comes out). But now it works with MediaMonkey!

    However I am not sure if music is cast from my phone or if it plays from the external hard drive connected to the Raspberry Pi as they have identical libraries. But at least it works for now.

    29. März 2018 at 13:41 #34899

    Shairtunes2 does not work in LMS (plugin failed to load).

    28. März 2018 at 17:33 #34848

    Ok, I tried this but it still doesn’t work. When I press „play“, it seems to start but after two seconds the track restarts at the beginning. And no sound comes out.

    28. März 2018 at 14:43 #34845

    I see there are a few plugins related to DLNA. Which one should I use?

    27. März 2018 at 17:35 #34827

    Oh I guess it means Logitech Media Server? Yes, it works with the Squeezebox Server (with files on an USB external drive connected to the Raspberry Pi). I use the Squeezer app on my phone.

    Is there something else I could test or try?

    • This reply was modified 6 years, 8 months ago by chicoinm.
    27. März 2018 at 17:00 #34822

    Ok, I will try that. But what does „LMS“ mean?

    27. März 2018 at 0:01 #34771

    Hi Heiner, I tried with AllConnect and it still doesn’t work.

    Another thing that I noticed is that when casting from my PC, playback is much longer to start. It used to be instantaneous but now it takes 4-5 seconds.

    26. März 2018 at 15:06 #34740

    I am using the gmedia render player.

    18. Januar 2018 at 3:05 #33516

    Ok I got it working by installing the gmediarender server. Thanks for your help.

    16. Januar 2018 at 17:45 #33483

    I did that, but nothing changed. Audio output from the Boss Dac works when using the Squeezebox server. But I only get HDMI audio output for Kodi or streaming from my laptop.

    I will try to reinstall Max2play completely. Is there a guide on how to do this correctly for the Boss Dac?

    12. Januar 2018 at 5:21 #33367

    The choices I have for audio output in Kodi are:

    PI: HDMI
    PI: Analogue
    ALSA: Playback/recording…
    ALSA: PulseAudio Sound Server

    Should the Boss Dac be there?

    9. Januar 2018 at 18:18 #33327

    The password is max2play.

    9. Januar 2018 at 1:39 #33314

    That did not help. I still Kodi audio output only through HDMI.

    6. Januar 2018 at 20:50 #33275

    Could it be related to the fact that the Boss Dac is listed as card #1 and ALSA is listed as card #0? In Kodi, I only see ALSA as audio output.

    • This reply was modified 6 years, 10 months ago by chicoinm.
    6. Januar 2018 at 2:45 #33268

    I have the same problem. I am on Max2play 2.44. I only have sound over HDMI except with the Squeezebox interface on PC, where the analog output of the Boss works. Any idea?

Viewing 18 posts - 1 through 18 (of 18 total)