Carousel

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Back to forum
    Posted in: Allo USB Bundle
  • Carousel premium
    16. August 2021 at 17:33 #51571

    Well, luckily I had not sent the old modem-router back to the ISP yet. I plugged in the M2P-Pi and a PC by ethernet and started them up. I could access the M2P-Pi via its old address. Then, under WiFi/LAN – Fixed LAN-IP Setup, I unchecked „Set fixed LAN IP-Address“ and saved and shut down the M2P-Pi. Plugged it back into the new modem-router network and all was fine; the M2P-Pi took a new Fritz 178 address.

    Would still like to know though if there is any way into the settings from within the M2P-Pi itself.

    Carousel premium
    16. August 2021 at 14:46 #51570

    Hello, I have a similar problem. I just changed from a Netgear 192.168.0.xxx router to a FritzBox 192.168.178.xxx and two of my three Max2Play units seem to still be looking for their old IP address. One of them is attached to a screen. I can see some kind of message flying by about unexpected IP address. But then it loads the Max2Play desktop. When I open Kodi, I can see under System Information that it thinks it still has the old Netgear Router address. I expect something is stuck in the Fixed LAN-Ip Setup, but I do not know how to reach the web page from the desktop… Advice please, thanks!

    Carousel premium
    8. November 2020 at 23:03 #50084

    Hello, I made use of these instructions so that I could get DSD music through a HifiBerry Digi+Pro mounted on a Raspberry Pi4 running Max2Play and attached to a pair of Dali Zensor AX speakers via Toslink fiber. Since another unit in another room that has a HifiBerry AMP2 had no problems before making these changes, I am guessing that the Digi+Pro was sending DSD data to the Dalis in DoP, which probably did not work.

    But now I am wondering, just what quality of music data is actually being sent to and beyond the Digi+Pro given these settings. Is it CD quality (16-44) or better? Or otherwise?

    And is there something else that I could do that would be better? Are there any settings that I could input for the Digi+Pro via the Max2Play HifiBerry plugin webpage for that unit?

    Note: A third Pi4 that runs the server is attached to a soundbar via HDMI. This one also output sound fine when playing DSD files before making these changes. PCs runnig Squeezelite-X also had no problems. The only problem was with the Digi+Pro unit.

Viewing 3 posts - 1 through 3 (of 3 total)