well i spoke too soon, I tested that both ympd and ampache were functioning, I then added the full power to usb setting and rebooted and added the USB drive and now I am back with a dead r-pi
this time it is erroring out on mysql the only thing i did different was to add SD card protection.
I did a full format (full erease of teh card) and then followed this install order and it worked
loaded m2p_hifiberry_226_wps.img
expanded file system (USB drive unplugged)
reboot
added hifiberry digi/digi+ ( I have the digi+)
rebooted
instlled/started MPD
installed ampache
ampache is working
OK I tried doing the resize first following these steps and it failed again 🙁
First here are my specs, Raspberry pi 2, hifiberry digi+, on an 8gb Samsung class 10 SD card
loaded m2p_hifiberry_226_wps.img
expanded file system (USB drive unplugged)
reboot
added hifiberry digi/digi+ ( I have the digi+)
rebooted
updated info IE my email addy to register, set time zone to america/chicago
updated via the update button
rebooted
removed Kodi
removed Squeezebox server
added music player MPD
added access point
saved
installed Access point
set access point settings
reboot
ampache installed
failed same issue
as I said I got it working one time without without enabling the higher power for the usb ports… This last time I didnt have the usb drive hooked up and without enabling the full power usb.
Well
attempt 2
loaded m2p_hifiberry_226_wps.img
added hifiberry digi/digi+ ( I have the digi+)
rebooted
updated info IE my email addy to register, set time zone to america/chicago
updated via the update button
rebooted
removed Kodi
removed Squeezebox server
added music player MPD
added access point
saved
installed Access point
set access point settings
reboot
expanded file system (USB drive unplugged)
reboot
ampache installed
failed with same issue
English
German
