Alex

Forum Replies Created

Viewing 30 posts - 121 through 150 (of 271 total)
  • 12. Januar 2016 at 11:38 #17798

    ps I realise he’s reffering to Rune, I’m just cluching straws 😉

    12. Januar 2016 at 11:37 #17797

    Hi Noop

    Just so you know I ordered two Pi wifi dongles the other day and hopefully they will be here soon. And strangely enough I just came accross this, look down the page and see what this guy says about the Pi dongle, maybe there’s something in it

    http://www.runeaudio.com/forum/struggling-with-wifi-access-point-t3004.html

    12. Januar 2016 at 1:02 #17796

    Hi noop,

    guess it’s 18:00 where you are as its 23:00 here so with an early start tomorrow I think I will hit the sack now

    I’m just so frustrated that it’s not working, but is, well if you look at the reports it is

    But if you do think of any suggestions, I’m 100% up for trying

    It’s a pity you’re not around the corner as I’d take you out for a beer, I fact a few beers.

    12. Januar 2016 at 0:26 #17795

    There’s also

    Invalid nwid. Invalid crypt. Invalid frag

    Whatever they Are

    12. Januar 2016 at 0:25 #17794

    Same line as managed

    Freq 2.437. Accesspoint 00:50:7F:A9:E9:AB

    12. Januar 2016 at 0:22 #17793

    Mode is managed
    Lo no wireless
    Eth0 no wireless

    12. Januar 2016 at 0:19 #17792

    ok

    12. Januar 2016 at 0:18 #17791

    tell you what noop

    I can’t ask for anymore of your time, you have been just fantasic, you really have and I’m very very very grateful , I have even learned something too.

    Do you think it’s worth me starting from scratch

    I’ll buy a new pi, dongle and download a new image over the next week

    Maybe that might help.Because don’t you feel there is something not quite right going on, its all working but not, so very odd

    12. Januar 2016 at 0:14 #17789

    and yes my wifi has been turned on with all the devices I have used to check the Pi dongle, I’m only saying that because thats just about the last option surely.

    Its mighty odd though, even to me with my little knowledge

    12. Januar 2016 at 0:10 #17788

    i also used another image burner this time, just for the record,

    12. Januar 2016 at 0:08 #17787

    #### DNSMASQ Installed ####
    Status: install ok installed

    #### HOSTAPD Installed ####
    Status: install ok installed

    #### WiFi Interface Installed ####
    2

    #### DNSMASQ Running ####
    5 S 110 2320 1 0 80 0 – 1612 poll_s ? 00:00:00 dnsmasq

    #### HOSTAPD Running ####
    1 S 0 2217 1 0 80 0 – 502 poll_s ? 00:00:00 hostapd

    12. Januar 2016 at 0:03 #17785

    We are talking in the dbug section noop are we?

    12. Januar 2016 at 0:00 #17783

    Maybe in the coming days I fire up my other Pi , who knows there could be some memory corruption and it only comes to light with certain commands , ie in crertain places of memory

    11. Januar 2016 at 23:58 #17782

    Hi noop,

    Have to say I’m not surprised it’s not working OMG, what a pain

    11. Januar 2016 at 23:52 #17779

    And there is a save button, is there an order I should do this .

    11. Januar 2016 at 23:51 #17778

    Noop, yes got it it’s there!!

    Sorry too hasty missed it first time round
    Just like you described right ready for a reboot, this standalone box, should I tick this before reboot ?

    11. Januar 2016 at 23:45 #17776

    Shall I unplug as before and reboot, taking off everything except the dongle ?

    11. Januar 2016 at 23:43 #17775

    Ok noop, it’s loaded
    Because I’m extremely nervous about this next bit, I’m going to clear this with you first as it’s this AP that’s the issue.

    It says I need to reboot, do I first tick standalone
    And when should I see that line you mentioned after reboot as I don’t see it yet albeit it says accesspoint is live and active, but it’s said it every time I have got to this stage, hence my concern

    11. Januar 2016 at 23:37 #17774

    Now installing, God hope this works 🙂

    11. Januar 2016 at 23:37 #17773

    Now loaded again ok,

    11. Januar 2016 at 23:36 #17772

    This is a bit worrying, it started to d/l then the page just cleared, so I hit the back button and it’s now hot the red revolving circle as though it’s downloading, but it’s taking a bit of time

    I’m going to stop it and see if it’s loaded in the background somehow

    11. Januar 2016 at 23:30 #17771

    Great git it, it’s just loading now

    11. Januar 2016 at 23:28 #17768

    Hi noop, just about to start that, wifi is loading at the moment
    Do you mean “ you should see a line“ ?

    11. Januar 2016 at 23:15 #17766

    Noop, I’m just going to start installing the plugin’s using this we did before

    noop
    9. JANUAR 2016 AT 2:32 #17645
    Here’s something to try…using your previous recipe modified…to help debug the issue.

    1. Burn a new image.
    2. Expand it.
    3. Update M2P.
    4. Increase the USB current via the raspberry plug in (not really necessary yet)
    5. Plug in the wifi dongle.
    6. install wifi.
    7. install access-point.
    8. remove power and then remove all connections, except wifi dongle, then apply power.

    Wait a few minutes for the PI to boot then test the access point functionally:
    1. on your IOS device, set-up -> wifi should show an available network with SSID “max2play” (or whatever you set it to)
    2. Try to connect to this network, if you get an error, “forget” the network, and re-try (you will prompted for password in this case).
    3. If connected, on the IOS device use safari or chrome and browse the PI at: http://192.168.189.1/ , you should see the max2play page.

    If you see the web page then access point is successfully installed.

    This reply was modified 2 days, 20 hours ago by noop.
    This reply was modified 2 days, 20 hours ago by noop.
    REPLY

    11. Januar 2016 at 23:04 #17765

    Just burning image noop, 2.22,

    11. Januar 2016 at 21:59 #17763

    Can you believe we can’t get fibre here !!!!

    11. Januar 2016 at 21:58 #17762

    Noop it’s telling me it’s going to take 33mins
    Then I have to load the plugin’s and try what you’ve suggested.
    Maybe not worth checking back for an hour or so, either way I’ll message to on the progress in an hours time

    11. Januar 2016 at 21:53 #17761

    Got it
    Will be back shortly

    11. Januar 2016 at 21:52 #17760

    Re the image, just to let you know more than anything, I must have d/l the image 10’s of times and as you can see, it’s not made a difference, only people like you and Fred have made a change.

    What’s your thoughts noop on d/l it again?
    I’m Crurious

    11. Januar 2016 at 21:48 #17758

    And the download file, sorry, I can try and d/l it again if you like noop

Viewing 30 posts - 121 through 150 (of 271 total)