Forum Replies Created
-
Posted in: Allo USB Bundle
-
23. August 2018 at 23:45 #37237
Success!
I can report the sound coming out of my speakers, installed LMS and this part is working fine.
Thanks for advice. Now I’ll get onto figuring out how to get kodi to use the amp instead of HDMI output but that’s whole different topic.Thanks
22. August 2018 at 22:36 #37147Hi Hiner,
I’ve just started with fresh install on class10 card.
On first boot chosen to my amp card and proceeded with reboot.
Upon reboot it loops on network time synchronization but as far as I can remember it was something to do with bad entry in config.txt (had to comment out justboomdac or something similar).
After successful boot I’ve activated my license – proceeded with updates to max2play (to 2.46), reboot, disabled build in audio, reboot (few actually due to that bug with network time sync). Upgraded kernel to 4.14, reboot, apt-get update/upgrade, got error – unable to get some packages – try –fix-missing (probably a mirror is down or something). Done apt-get update/upgrade manually, reboot.
Set ‚advanced‘ in JustBoom, and here’s the debug from squeezelite:#### SQUEEZELITE VERSION #### Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving. #### SQUEEZELITE BUILDOPTIONS #### Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC #### AUDIOPLAYER CONFIG #### ### Configuration of Audioplayers SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpijustboomd -a 80:4:: -o hw:CARD=sndrpijustboomd -V Digital -Q SQUEEZESLAVE_PARAMETER=-n plugequal SHAIRPORT_PARAMETER=-d sysdefault:CARD=sndrpijustboomd -t hardware -m hw:CARD=sndrpijustboomd -c Digital USE_USB_DAC=0 USE_EQUALIZER=0 SYSTEM_USER=pi YMPD_PARAMETER=--webport 8081 #### SQUEEZELITE -l #### Output devices: null - Discard all samples (playback) or generate zero samples (capture) equal plugequal - Equalizer for plughw:0,0 default:CARD=sndrpijustboomd - snd_rpi_justboom_dac, - Default Audio Device sysdefault:CARD=sndrpijustboomd - snd_rpi_justboom_dac, - Default Audio Device dmix:CARD=sndrpijustboomd,DEV=0 - snd_rpi_justboom_dac, - Direct sample mixing device dsnoop:CARD=sndrpijustboomd,DEV=0 - snd_rpi_justboom_dac, - Direct sample snooping device hw:CARD=sndrpijustboomd,DEV=0 - snd_rpi_justboom_dac, - Direct hardware device without any conversions plughw:CARD=sndrpijustboomd,DEV=0 - snd_rpi_justboom_dac, - Hardware device with all software conversions #### SHAIRPORT (SYNC) VERSION #### 3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc #### OUTPUT SOUND DETAILS CARD 0 #### access: MMAP_INTERLEAVED format: S32_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 882 buffer_size: 3528 #### OUTPUT SOUND DETAILS CARD 1 ####
21. August 2018 at 21:30 #37077Hi there,
I seem to have a similar issue – identical hardware spec (RPi3 JB Amp HAT) – installed newest (stretch) image, updated everything (didn’t go for beta release yet), disabled build-in audio and having no joy of trying to get the speakers to speak.
I’m trying to get ympd to play anything for now, just so I’m sure i got it working right before I dive into trying to setup everything else.
The difference is that I’m in possession of 2 Amp HATs and both are acting exactly the same so unless there was a dodgy batch of VER 1.1 HATs from JustBoom and I happened to get both or its a software issue somewhere.
Any advice on what else I could try/test? Also my system is not installed on Class10 sd card and rather on Class4 but I hope it should make any difference for the hardware to be usable.Thanks
A
-