Which audio board could be add to my current configuration?

Max2Play > Topics > Which audio board could be add to my current configuration?

This topic has 1 reply, 2 voices, and was last updated 7 years, 10 months ago by Mbydeen.

Viewing 2 posts - 1 through 2 (of 2 total)

Back to forum

Posted in: General Questions on Hardware and Max2Play Versions
Bull premium

22. Februar 2017 at 21:22 #27147

Hello, I currently have a RPI 3 with the „famous“ LCD waveshare 5″ touch screen that use GPIO and HMDI connection to work. I would like to upgrade my system with an audio board but I’m not sure which of the supported boards would be compatible with me config.

Any recomendation or a noob guide? Please.

The only way is to upgrade the lcd to the rpi 7″ bundle,too?

Many thanks
Bull

Mbydeen

23. Februar 2017 at 15:27 #27174

Hi Bull

Please note that Max2Play software does not support 5 inch display.Normally the display uses the GPIO pins on the raspberry pi, and to setup an audio card you need „extra“ GPIO pins.regarding the audio cards, some of the audio cards have GPIO pins that could be connected via „jumper“ cables and other you have to solder pins onto the sound card by yourself,please read this wiki page:

https://www.max2play.com/en/wiki/7-touch-screen-connect-the-gpio/

please have a look at our shop webpage for the audio cards that we are offering at the moment:

https://shop.max2play.com/en/audio-boards.html

and for the displays and the bundles please check the following links:

https://shop.max2play.com/en/accessories/displays.html

https://shop.max2play.com/en/bundles/by-type/display-bundles.html

Regards,
Mohammad Mbydeen

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.