Using head phones in parallel to Audiophonic sound card

Max2Play Home › Forums › Max2Play on Raspberry PI › Using head phones in parallel to Audiophonic sound card

Viewing 3 posts - 1 through 3 (of 3 total)
  • Back to forum
    Posted in: Max2Play on Raspberry PI
  • poitzl premium
    17. Februar 2019 at 18:09 #44481

    How can I use the head-phone on raspberry pi’s 3.5mm jack in parallel with the Audiophonic sound card?

    I use squeezelite with sound-card: sysdefault:CARD=sndrpihifiberry however there is no sound on pi’s 3.5mm jack.

    Can I switch between the stereo jack on the sound-card and the raspberry pi’s 3.5mm jack – or use it in parallel?

    Is it possible to use the Audiophoic sound-card for raspberry pi’s 3.5mm jack? In the pi’s setting I use Audiophonics as device for the raspberry. But as said before there is no sound on raspberry pi’s 3.5mm jack.

    Best regards,
    Paul

    Below is me debug information:

    #### SQUEEZELITE VERSION ####
    Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.

    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpihifiberry -a 80:4::
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=sndrpihifiberry
    USE_USB_DAC=0
    USE_EQUALIZER=1
    SYSTEM_USER=pi
    YMPD_PARAMETER=–webport 8081
    GMEDIARENDERER_ALSA_DEVICE=pulse
    LMSIP=10.0.0.249

    #### SQUEEZELITE -l ####
    Output devices:
    null – Discard all samples (playback) or generate zero samples (capture)
    pulse – PulseAudio Sound Server
    equal
    plugequal – Equalizer for plughw:0,0
    headphonesplug
    bs2b
    headphones
    default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    dmix:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample mixing device
    dmix:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample mixing device
    dsnoop:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample snooping device
    dsnoop:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample snooping device
    hw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct hardware device without any conversions
    hw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct hardware device without any conversions
    plughw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Hardware device with all software conversions
    plughw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Hardware device with all software conversions
    default:CARD=sndrpihifiberry – snd_rpi_hifiberry_dac, – Default Audio Device
    sysdefault:CARD=sndrpihifiberry – snd_rpi_hifiberry_dac, – Default Audio Device
    dmix:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Direct sample mixing device
    dsnoop:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Direct sample snooping device
    hw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Direct hardware device without any conversions
    plughw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Hardware device with all software conversions

    #### SHAIRPORT (SYNC) VERSION ####
    2.8.0-openssl-Avahi-ALSA-soxr

    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed

    #### OUTPUT SOUND DETAILS CARD 1 ####
    access: RW_INTERLEAVED
    format: S32_LE
    subformat: STD
    channels: 2
    rate: 44100 (44100/1)
    period_size: 882
    buffer_size: 3528

    Cassio299 premium
    18. Februar 2019 at 9:39 #44489

    Hi Poul

    Install the multisqueeze plugin

    Do the following settings:

    Audioplayer tab
    turn off Squeezelite
    turn off Shairport
    (remove the autostart mark and hit save)

    Multisqueeze tab

    Set the Instance as follow:

    Instance 0 : (Edit advanced options) sound card: default bcm2835 ALSA……..card = ALSA (your 3,5mmm jack)
    Instance 1 : (Edit advanced options) sound card: plughw – snd_rpi_hifiberry

    Set Audio Output on Raspberry PI: Force Headphone Jack

    Your audio jack out is called Max2Play_0 in squeezeligt
    Your audiophonics card is called Max2Play in squeezeligt

    Reboot

    that’s it

    Peter

    poitzl premium
    23. Februar 2019 at 19:31 #44550

    tx!!!!!!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here