Undervoltage with Justboom Amp Hat and Raspberry PI 3

Max2Play > Topics > Undervoltage with Justboom Amp Hat and Raspberry PI 3

This topic has 2 replies, 2 voices, and was last updated 4 years, 4 months ago by klodeckl premium.

Viewing 3 posts - 1 through 3 (of 3 total)

Back to forum

Posted in: General Questions on Hardware and Max2Play Versions
klodeckl premium

26. Juli 2020 at 18:39 #49424

Hello,

I have bought the Justboom Amp Hat and Raspberry PI 3 Bundle. I always receive undervoltage messages. All 3 weeks the raspberry freezes because of that. Is it possible to connect one PSU on the Amp HAT and also one on the Raspberry Pi itself? Or should I buy a better PSU like that one: https://www.amazon.de/Netzteil-Netzadapter-Transformator-Kaltger%C3%A4testecker-Lichterkette/dp/B07WMRXRNR/?
Thanks!

Regards
Bernhard

MarioM Moderator

28. Juli 2020 at 11:57 #49426

Hi Bernhard,

As far as I know, the separate power supply of Pi and Justboom Amp is not possible. Your problem sounds very much like the power supply is defective. I would therefore recommend that you test another suitable power supply, (like this one: https://shop.max2play.com/en/amp-powersupply-new.html) with your system.

klodeckl premium

3. August 2020 at 21:27 #49493

Hi Mario,

thank you very much. The problem persists since I bought it. I will try another one.

Regards
Bernhard

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.