Max2Play Home › Forums › Max2Play as Squeezebox (Player / Server) › Squeezelite issues
- This topic has 1 reply, 2 voices, and was last updated 3 years, 5 months ago by MarioM Moderator.
-
16. Mai 2021 at 18:48 #51251
Hi All
I’m having problems getting Squeezelite to work. When I start Squeezelite I get „Trying to launch … NOT successful Click here to show detailed information“
And this is what it says:
Trying to launch … NOT successful Click here to show detailed information
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr – Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr – Init not done for -1, skipping unlock
[18:45:44.015170] test_open:310 playback open error: No such file or directory
[18:45:44.015339] output_init_common:382 unable to open output deviceAnd on the dbug at the bottom of the page I get this:
#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o plug:jack -a 80::: -C 5
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d plug:jack
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
GMEDIARENDERER_ALSA_DEVICE=plug:jack#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
jack – JACK Audio Connection Kit
pulse – PulseAudio Sound Server
equal
plugequal – Equalizer for plughw:0,0
default:CARD=b1 – bcm2835 HDMI 1, bcm2835 HDMI 1 – Default Audio Device
sysdefault:CARD=b1 – bcm2835 HDMI 1, bcm2835 HDMI 1 – Default Audio Device
dmix:CARD=b1,DEV=0 – bcm2835 HDMI 1, bcm2835 HDMI 1 – Direct sample mixing device
dsnoop:CARD=b1,DEV=0 – bcm2835 HDMI 1, bcm2835 HDMI 1 – Direct sample snooping device
hw:CARD=b1,DEV=0 – bcm2835 HDMI 1, bcm2835 HDMI 1 – Direct hardware device without any conversions
plughw:CARD=b1,DEV=0 – bcm2835 HDMI 1, bcm2835 HDMI 1 – Hardware device with all software conversions
usbstream:CARD=b1 – bcm2835 HDMI 1 – USB Stream Output
default:CARD=Headphones – bcm2835 Headphones, bcm2835 Headphones – Default Audio Device
sysdefault:CARD=Headphones – bcm2835 Headphones, bcm2835 Headphones – Default Audio Device
dmix:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Direct sample mixing device
dsnoop:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Direct sample snooping device
hw:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Direct hardware device without any conversions
plughw:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Hardware device with all software conversions
usbstream:CARD=Headphones – bcm2835 Headphones – USB Stream Output#### SHAIRPORT (SYNC) VERSION ####
3.3.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc#### OUTPUT SOUND DETAILS CARD 0 ####
closed#### OUTPUT SOUND DETAILS CARD 1 ####
closedI did read it could be a hardware output issue but I don’t have any other hardware attached to it as I’m going to run it as a player via bluetooth within a group of players. I’d really appreciate any suggestions. Also this is the second image I have burned onto my SD card, plus its also happening with another M2P I have. Thanks in advance.
- This topic was modified 3 years, 5 months ago by Alex.
18. Mai 2021 at 13:53 #51261Hi Alex,
In the advanced options of Squeezelite you can choose your sound card. Your sound card is currently set to „Jack“. Please select „sysdefault“ there. Then Squeezelite should be able to start and you should be able to play music over the headphone or HDMI output of the Pi.
-
You must be logged in to reply to this topic.