JustBoom IR with Max2Play

Viewing 3 posts - 1 through 3 (of 3 total)
  • 9. Dezember 2016 at 23:43 #24734

    Hello, I just ordered a Max2Play bundle with a JustBoom DAC HAT. Enclosed with the DAC is an IR Receiver which can be soldered onto the JustBoom Sound card. I would like to know if max2play supports the IR Receiver if he is soldered on the JustBoom DAC Hat card. Since the DAC is connected to an amplifier, I would like to use the IR Receiver on max to play only to skip a song.
    Greetings Konrad

    20. Dezember 2016 at 1:47 #25046

    And in addition I would like to know if you are going to offer a bundle with a justboom DAC, a 7″Display and a case (instead of hifiberry and iqaudio).

    20. Dezember 2016 at 15:35 #25071

    Dear konus,

    We are working on the implementation of the IR for JustBoom. We recently received the JustBoom remote control and we test it now. I will inform you in this post again as soon as it works.

    Currently, there is no case for a touch screen with JustBoom sound cards. Also here, I will write again in this post, if it is available in the shop.

    Best Regards
    Christoph

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here