Issues with alsamixer for JustBoom and HiFi Berry Digi + cards

Max2Play Home › Forums › Max2Play on Raspberry PI › Issues with alsamixer for JustBoom and HiFi Berry Digi + cards

Viewing 2 posts - 1 through 2 (of 2 total)
  • Back to forum
    Posted in: Max2Play on Raspberry PI
  • Bencat57 premium
    15. November 2019 at 16:56 #47542

    Hi I use Raspberry Pi plus Digi Hats as players in some of my systems and in some cases the output from the Digi card is lower than normal . I use the option after ssh in to the card of alsamixer and then under the instructions I should be able to F6 to the card being used and check that the Digital Output has been set to maximum . However with both Just Boom Card and Hi Fi Berry Digi + Pro I can access the alsamixer but I am not able to switch the card inputs with F6 it does nothing . Please can you advise if this is due to your preset for these cards or is there another issue . Sorry I was going to include a copy of the alsamixer window . as it appears but it will not paste in to this message

    Heiner premium
    20. November 2019 at 16:09 #47572

    Hi Bencat,

    You can link to image hosts if you like for sharing screenshots.

    ALSA mixer should still be accessible. Try using sudo su in SSH to get root rights.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here