Health Checker

Max2Play Home Forums Max2Play on Raspberry PI Health Checker

Viewing 7 posts - 1 through 7 (of 7 total)
  • 20. April 2017 at 15:53 #28387

    Thanks for the health Checker, very informative! Couple of questions, I notice the „Health Checker“ screen goes red and a „!“ is present whenever the CPU load goes above 2%? Isn’t this really low utilization for what appears to be a warning?

    Thanks!

    Scott

    24. April 2017 at 14:02 #28443

    Hi sfraser131,

    Please note that the scale is the CPU load and not CPU utilization, you could check this here:

    https://en.wikipedia.org/wiki/Load_(computing)

    Best Regards,
    Mohammad Mbydeen

    23. August 2017 at 7:13 #30819

    My report:

    Health Checker
    Internet: <<!>> NO Connection
    CPU Load: 0.19
    SD Card Usage: 38%
    Temp CPU: 49.8

    Why „no connection“? It is connected and playing Internet radio this minute.

    thanks
    Hilary

    On Tue, Aug 22, 2017 at 12:22 AM, Max2Play <[email protected]> wrote:
    Heiner <i>Moderator</i> wrote:

    Hi guys,

    You should find in the Settings/Reboot menu in our current version. Here is our announcement: https://www.max2play.com/en/2017/04/health-checker/

    24. August 2017 at 9:53 #30852

    Hi Hilary,

    Please reboot the system. Also, please check the WiFi/LAN settings whether there are any errors.

    28. August 2017 at 19:54 #30960

    I rebooted the system and it is now healthy. 🙂
    thanks
    Hilary

    28. August 2017 at 22:43 #30963

    Hi

    today LMS was not reachable and Health Checker schows a temp of 85°C (normally 55°C). I´d nothing changed since months. The Pi stand always at the same place

    After reboot everything works fine

    • This reply was modified 7 years, 2 months ago by std.
    29. August 2017 at 10:23 #30974

    Hi std,

    Did you check the Squeezebox server log? It might be related to some plugin or process of the server that overloaded it. It might also just have been related to the high temperatures we recently had 😉

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.

Register here