[SOLVED] enable mouse

This topic has 9 replies, 2 voices, and was last updated 6 years, 10 months ago by Heiner premium.

Viewing 10 posts - 1 through 10 (of 10 total)

Back to forum

Posted in: Max2Play on Raspberry PI
patrick31698 premium

10. Februar 2018 at 13:50 #33937

HI,
As the touch of my offical Raspi Display isnot working properly i want to use a mouse with jivelite.
Could you please advice me how to Do that?

Heiner premium

12. Februar 2018 at 11:57 #33952

No problem, just connect a simple USB mouse and the Pi should automatically detect it and let you use it in Jivelite. Just make sure you don’t have the cursor disabled in your settings (this makes sense for touch control but obviously not for mouse use).

patrick31698 premium

12. Februar 2018 at 12:05 #33954

So far i was only able to use the scroll-wheel but i was not able to select any entry by clicking.

Heiner premium

12. Februar 2018 at 13:44 #33957

Should not be the case, any and all USB plug and play input devices are usually immediately recognized and usable for control.

Did you make sure that cursor is not deactivated?

patrick31698 premium

12. Februar 2018 at 14:10 #33959

I am not fiully sure about that.

But i think disableing the cursor is part of some preminum feature. I am using a free version. but i will check.

patrick31698 premium

12. Februar 2018 at 21:28 #33963

Mouse seems to be there but the cursor is invisible 🙁

patrick31698 premium

13. Februar 2018 at 8:53 #33966

I can’t find such a option here http://demo.max2play.com:81/plugins/raspberrysettings/controller/Setup.php
before i buy a licence i like to be sure, that it really solves the problem…….

I even have no cursor on the LXDE Desktop

Heiner premium

13. Februar 2018 at 15:51 #33982

Hi patrick,

It’s in the RPi-Display menu: https://www.max2play.com/en/portfolio/plugin-raspberry-pi-touch-display-2/

patrick31698 premium

14. Februar 2018 at 8:26 #33990

After upgrading to premium i could swith the mouse cursor visible. Now everything is fine!

Heiner premium

14. Februar 2018 at 11:10 #33993

Thanks for the quick update, I’ll mark the topic solved 🙂

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.