DLNA renderer does not install

This topic has 9 replies, 3 voices, and was last updated 6 years, 11 months ago by Audio_Ole premium.

Viewing 10 posts - 1 through 10 (of 10 total)

Back to forum

Posted in: Max2Play Add-ons
Audio_Ole premium

4. Januar 2018 at 21:45 #33231

When I try to activate that plug in the batch file runs and after a good chunk of text ends with
-MP -MF .deps/main.Tpo -c -o main.o main.c
Makefile:382: recipe for target ‚main.o‘ failed
make[1]: Leaving directory ‚/tmp/gmrender-resurrect/src‘
Makefile:355: recipe for target ‚install-recursive‘ failed

And after that the plug still is offered as to be installed…

Heiner premium

8. Januar 2018 at 12:19 #33295

Hi Audio_Ole,

What system and version of Max2Play are you using?

Vagabund1986 premium

8. Januar 2018 at 23:42 #33311

Hi

I have the same problem

Version 2.45
Raspberry PI 3
HifiBerry DAC+ HW 2.6

/tmp /var/www/max2play/public
Reading package lists…
Building dependency tree…
Reading state information…
autoconf is already the newest version.
automake is already the newest version.
libtool is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 14 not upgraded.
Reading package lists…
Building dependency tree…
Reading state information…
gstreamer0.10-alsa is already the newest version.
gstreamer0.10-alsa set to manually installed.
The following extra packages will be installed:
autopoint debhelper dh-autoreconf dh-strip-nondeterminism gettext
gettext-base gir1.2-freedesktop gir1.2-glib-2.0 gir1.2-gstreamer-0.10
gstreamer0.10-gconf gstreamer0.10-x intltool-debian liba52-0.7.4 libaa1
libarchive-zip-perl libasprintf-dev libasprintf0c2 libavc1394-0 libcdaudio1
libcdparanoia0 libdca0 libdirac-encoder0 libdv4 libdvdnav4 libdvdread4
libfftw3-double3 libfile-stripnondeterminism-perl libflite1 libgettextpo-dev
libgettextpo0 libgirepository-1.0-1 libgstreamer-plugins-bad0.10-0
libiec61883-0 libkate1 libmail-sendmail-perl libmhash2 libmimic0 libmpeg2-4
libofa0 libopencore-amrnb0 libopencore-amrwb0 libraptor2-0 librasqal3
librdf0 libsidplay1 libslv2-9 libsoundtouch0 libspandsp2
libsys-hostname-long-perl libtwolame0 libunistring0 libupnp6-dev
libvisual-0.4-0 libvisual-0.4-plugins libvo-aacenc0 libvo-amrwbenc0
libxml2-dev libzbar0 libzvbi-common libzvbi0 po-debconf
Suggested packages:
dh-make gettext-doc frei0r-plugins libdv-bin oss-compat libdvdcss2
libfftw3-bin libfftw3-dev gstreamer0.10-doc raptor2-utils rasqal-utils
librdf-storage-postgresql librdf-storage-mysql librdf-storage-sqlite
librdf-storage-virtuoso redland-utils sidplay-base xsidplay slv2-jack
libupnp6-doc libmail-box-perl
The following NEW packages will be installed:
autopoint debhelper dh-autoreconf dh-strip-nondeterminism gettext
gettext-base gir1.2-freedesktop gir1.2-glib-2.0 gir1.2-gstreamer-0.10
gstreamer0.10-gconf gstreamer0.10-plugins-bad gstreamer0.10-plugins-base
gstreamer0.10-plugins-good gstreamer0.10-plugins-ugly
gstreamer0.10-pulseaudio gstreamer0.10-x intltool-debian liba52-0.7.4 libaa1
libarchive-zip-perl libasprintf-dev libasprintf0c2 libavc1394-0 libcdaudio1
libcdparanoia0 libdca0 libdirac-encoder0 libdv4 libdvdnav4 libdvdread4
libfftw3-double3 libfile-stripnondeterminism-perl libflite1 libgettextpo-dev
libgettextpo0 libgirepository-1.0-1 libgstreamer-plugins-bad0.10-0
libgstreamer0.10-dev libiec61883-0 libkate1 libmail-sendmail-perl libmhash2
libmimic0 libmpeg2-4 libofa0 libopencore-amrnb0 libopencore-amrwb0
libraptor2-0 librasqal3 librdf0 libsidplay1 libslv2-9 libsoundtouch0
libspandsp2 libsys-hostname-long-perl libtwolame0 libunistring0 libupnp-dev
libupnp6-dev libvisual-0.4-0 libvisual-0.4-plugins libvo-aacenc0
libvo-amrwbenc0 libxml2-dev libzbar0 libzvbi-common libzvbi0 po-debconf
0 upgraded, 68 newly installed, 0 to remove and 14 not upgraded.
Need to get 615 kB/30.7 MB of archives.
After this operation, 66.9 MB of additional disk space will be used.
Do you want to continue? [Y/n] Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libxml2-dev armhf 2.9.1+dfsg1-5+deb8u4
404 Not Found
checking for a BSD-compatible install… /usr/bin/install -c
checking whether build environment is sane… yes
checking for a thread-safe mkdir -p… /bin/mkdir -p
checking for gawk… no
checking for mawk… mawk
checking whether make sets $(MAKE)… yes
checking whether make supports nested variables… yes
checking for style of include used by make… GNU
checking for gcc… gcc
checking whether the C compiler works… yes
checking for C compiler default output file name… a.out
checking for suffix of executables…
checking whether we are cross compiling… no
checking for suffix of object files… o
checking whether we are using the GNU C compiler… yes
checking whether gcc accepts -g… yes
checking for gcc option to accept ISO C89… none needed
checking whether gcc understands -c and -o together… yes
checking dependency style of gcc… gcc3
checking for special C compiler options needed for large files… no
checking for _FILE_OFFSET_BITS value needed for large files… 64
checking for gcc… (cached) gcc
checking whether we are using the GNU C compiler… (cached) yes
checking whether gcc accepts -g… (cached) yes
checking for gcc option to accept ISO C89… (cached) none needed
checking whether gcc understands -c and -o together… (cached) yes
checking dependency style of gcc… (cached) gcc3
checking for gcc option to accept ISO C99… -std=gnu99
checking for gcc -std=gnu99 option to accept ISO Standard C… (cached) -std=gnu99
checking whether make sets $(MAKE)… (cached) yes
checking for asprintf… yes
checking for exp in -lm… yes
checking for pkg-config… /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0… yes
checking for GLIB… yes
checking for GST… no
checking for GST… no
checking for LIBUPNP… no
checking how to run the C preprocessor… gcc -std=gnu99 -E
checking for grep that handles long lines and -e… /bin/grep
checking for egrep… /bin/grep -E
checking for ANSI C header files… yes
checking that generated files are newer than configure… done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating config.h
config.status: executing depfiles commands
make all-recursive
make[1]: Entering directory ‚/tmp/gmrender-resurrect‘
Making all in src
make[2]: Entering directory ‚/tmp/gmrender-resurrect/src‘
(echo „#define GM_COMPILE_VERSION \“2017-12-10_704b182\““ > git-version.h-new; \
cmp -s git-version.h git-version.h-new || cp git-version.h-new git-version.h; \
rm git-version.h-new)
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DPKG_DATADIR=\“/usr/local/share/gmediarender\“ -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wwrite-strings -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
Makefile:382: recipe for target ‚main.o‘ failed
make[2]: Leaving directory ‚/tmp/gmrender-resurrect/src‘
Makefile:355: recipe for target ‚all-recursive‘ failed
make[1]: Leaving directory ‚/tmp/gmrender-resurrect‘
Makefile:295: recipe for target ‚all‘ failed
Making install in src
make[1]: Entering directory ‚/tmp/gmrender-resurrect/src‘
(echo „#define GM_COMPILE_VERSION \“2017-12-10_704b182\““ > git-version.h-new; \
cmp -s git-version.h git-version.h-new || cp git-version.h-new git-version.h; \
rm git-version.h-new)
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DPKG_DATADIR=\“/usr/local/share/gmediarender\“ -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wwrite-strings -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
Makefile:382: recipe for target ‚main.o‘ failed
make[1]: Leaving directory ‚/tmp/gmrender-resurrect/src‘
Makefile:355: recipe for target ‚install-recursive‘ failed

Vagabund1986 premium

9. Januar 2018 at 15:14 #33321

Do you want to continue? [Y/n] Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libxml2-dev armhf 2.9.1+dfsg1-5+deb8u4
404 Not Found

Should not the link be that? http://mirrordirector.raspbian.org/raspbian/dists/jessie/main

Audio_Ole premium

9. Januar 2018 at 20:41 #33329

Hi Heiner,
I’m trying to get this to work on a raspberry 3 with Hifiberry Digi+ The Max2Play version is now 2.45, but I’ve also tried on the preceding version, the one I downloaded. I’ve obviously tried to download to separate times and installed on two separate SD cars and tried to install the DLNA renderer both before and after 2.45 update…

Heiner premium

11. Januar 2018 at 15:01 #33360

Hi Audio-Ole,

Thank your for the post, could you try running a beta update and trying again? Could you also please post your error message?

Audio_Ole premium

12. Januar 2018 at 22:08 #33388

First the error message – or rather the log of what happened with the other version:
/tmp /var/www/max2play/public
Reading package lists…
Building dependency tree…
Reading state information…
autoconf is already the newest version.
automake is already the newest version.
libtool is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 14 not upgraded.
Reading package lists…
Building dependency tree…
Reading state information…
gstreamer0.10-alsa is already the newest version.
gstreamer0.10-alsa set to manually installed.
The following extra packages will be installed:
autopoint debhelper dh-autoreconf dh-strip-nondeterminism gettext
gettext-base gir1.2-freedesktop gir1.2-glib-2.0 gir1.2-gstreamer-0.10
gstreamer0.10-gconf gstreamer0.10-x intltool-debian liba52-0.7.4 libaa1
libarchive-zip-perl libasprintf-dev libasprintf0c2 libavc1394-0 libcdaudio1
libcdparanoia0 libdca0 libdirac-encoder0 libdv4 libdvdnav4 libdvdread4
libfftw3-double3 libfile-stripnondeterminism-perl libflite1 libgettextpo-dev
libgettextpo0 libgirepository-1.0-1 libgstreamer-plugins-bad0.10-0
libiec61883-0 libkate1 libmail-sendmail-perl libmhash2 libmimic0 libmpeg2-4
libofa0 libopencore-amrnb0 libopencore-amrwb0 libraptor2-0 librasqal3
librdf0 libsidplay1 libslv2-9 libsoundtouch0 libspandsp2
libsys-hostname-long-perl libtwolame0 libunistring0 libupnp6-dev
libvisual-0.4-0 libvisual-0.4-plugins libvo-aacenc0 libvo-amrwbenc0
libxml2-dev libzbar0 libzvbi-common libzvbi0 po-debconf
Suggested packages:
dh-make gettext-doc frei0r-plugins libdv-bin oss-compat libdvdcss2
libfftw3-bin libfftw3-dev gstreamer0.10-doc raptor2-utils rasqal-utils
librdf-storage-postgresql librdf-storage-mysql librdf-storage-sqlite
librdf-storage-virtuoso redland-utils sidplay-base xsidplay slv2-jack
libupnp6-doc libmail-box-perl
The following NEW packages will be installed:
autopoint debhelper dh-autoreconf dh-strip-nondeterminism gettext
gettext-base gir1.2-freedesktop gir1.2-glib-2.0 gir1.2-gstreamer-0.10
gstreamer0.10-gconf gstreamer0.10-plugins-bad gstreamer0.10-plugins-base
gstreamer0.10-plugins-good gstreamer0.10-plugins-ugly
gstreamer0.10-pulseaudio gstreamer0.10-x intltool-debian liba52-0.7.4 libaa1
libarchive-zip-perl libasprintf-dev libasprintf0c2 libavc1394-0 libcdaudio1
libcdparanoia0 libdca0 libdirac-encoder0 libdv4 libdvdnav4 libdvdread4
libfftw3-double3 libfile-stripnondeterminism-perl libflite1 libgettextpo-dev
libgettextpo0 libgirepository-1.0-1 libgstreamer-plugins-bad0.10-0
libgstreamer0.10-dev libiec61883-0 libkate1 libmail-sendmail-perl libmhash2
libmimic0 libmpeg2-4 libofa0 libopencore-amrnb0 libopencore-amrwb0
libraptor2-0 librasqal3 librdf0 libsidplay1 libslv2-9 libsoundtouch0
libspandsp2 libsys-hostname-long-perl libtwolame0 libunistring0 libupnp-dev
libupnp6-dev libvisual-0.4-0 libvisual-0.4-plugins libvo-aacenc0
libvo-amrwbenc0 libxml2-dev libzbar0 libzvbi-common libzvbi0 po-debconf
0 upgraded, 68 newly installed, 0 to remove and 14 not upgraded.
Need to get 615 kB/30.7 MB of archives.
After this operation, 66.9 MB of additional disk space will be used.
Do you want to continue? [Y/n] Err http://mirrordirector.raspbian.org/raspbian/ jessie/main libxml2-dev armhf 2.9.1+dfsg1-5+deb8u4
404 Not Found
checking for a BSD-compatible install… /usr/bin/install -c
checking whether build environment is sane… yes
checking for a thread-safe mkdir -p… /bin/mkdir -p
checking for gawk… no
checking for mawk… mawk
checking whether make sets $(MAKE)… yes
checking whether make supports nested variables… yes
checking for style of include used by make… GNU
checking for gcc… gcc
checking whether the C compiler works… yes
checking for C compiler default output file name… a.out
checking for suffix of executables…
checking whether we are cross compiling… no
checking for suffix of object files… o
checking whether we are using the GNU C compiler… yes
checking whether gcc accepts -g… yes
checking for gcc option to accept ISO C89… none needed
checking whether gcc understands -c and -o together… yes
checking dependency style of gcc… gcc3
checking for special C compiler options needed for large files… no
checking for _FILE_OFFSET_BITS value needed for large files… 64
checking for gcc… (cached) gcc
checking whether we are using the GNU C compiler… (cached) yes
checking whether gcc accepts -g… (cached) yes
checking for gcc option to accept ISO C89… (cached) none needed
checking whether gcc understands -c and -o together… (cached) yes
checking dependency style of gcc… (cached) gcc3
checking for gcc option to accept ISO C99… -std=gnu99
checking for gcc -std=gnu99 option to accept ISO Standard C… (cached) -std=gnu99
checking whether make sets $(MAKE)… (cached) yes
checking for asprintf… yes
checking for exp in -lm… yes
checking for pkg-config… /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0… yes
checking for GLIB… yes
checking for GST… no
checking for GST… no
checking for LIBUPNP… no
checking how to run the C preprocessor… gcc -std=gnu99 -E
checking for grep that handles long lines and -e… /bin/grep
checking for egrep… /bin/grep -E
checking for ANSI C header files… yes
checking that generated files are newer than configure… done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating config.h
config.status: executing depfiles commands
make all-recursive
make[1]: Entering directory ‚/tmp/gmrender-resurrect‘
Making all in src
make[2]: Entering directory ‚/tmp/gmrender-resurrect/src‘
(echo „#define GM_COMPILE_VERSION \“2017-12-10_704b182\““ > git-version.h-new; \
cmp -s git-version.h git-version.h-new || cp git-version.h-new git-version.h; \
rm git-version.h-new)
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DPKG_DATADIR=\“/usr/local/share/gmediarender\“ -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wwrite-strings -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
Makefile:382: recipe for target ‚main.o‘ failed
make[2]: Leaving directory ‚/tmp/gmrender-resurrect/src‘
Makefile:355: recipe for target ‚all-recursive‘ failed
make[1]: Leaving directory ‚/tmp/gmrender-resurrect‘
Makefile:295: recipe for target ‚all‘ failed
Making install in src
make[1]: Entering directory ‚/tmp/gmrender-resurrect/src‘
(echo „#define GM_COMPILE_VERSION \“2017-12-10_704b182\““ > git-version.h-new; \
cmp -s git-version.h git-version.h-new || cp git-version.h-new git-version.h; \
rm git-version.h-new)
gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I.. -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -DPKG_DATADIR=\“/usr/local/share/gmediarender\“ -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wwrite-strings -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c
Makefile:382: recipe for target ‚main.o‘ failed
make[1]: Leaving directory ‚/tmp/gmrender-resurrect/src‘
Makefile:355: recipe for target ‚install-recursive‘ failed

Audio_Ole premium

12. Januar 2018 at 22:08 #33389

And now for trying to install a beta –

Heiner premium

19. Januar 2018 at 10:48 #33531

Hi Ole,

Did the beta install work? We could successfully install on one of our testers yesterday. I hope your problem is solved.

Audio_Ole premium

22. Januar 2018 at 22:40 #33606

Hi Heiner, yes I installed a beta and got the renderer to install. But then I got stuck in getting the renderer to actually work and didn’t want to confirm before the whole thing actually worked… Since then I’ve not had time to work more on this. But reverting –

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.