Bluetooth works but the sound is "cut into pieces"

Max2Play Home Forums Max2Play Add-ons Bluetooth works but the sound is "cut into pieces"

Viewing 2 posts - 1 through 2 (of 2 total)
  • 17. Januar 2021 at 13:31 #50616

    Have a Raspberry Pi 3B+ with an Audiophonics I Sabre v4. There’s no trouble instaling blutooth, getting conecte dor displayng sound on it. But the sound is played like there’s a trouble in the signal, and I have an error message looking like this :
    Bluetooth-Dongle: Disponible
    Bluetoothsink Available: Restart Device! Pulseaudio might have crashed
    Pulseaudio: 1
    Squeezebox Server Autoplay: 1
    Can someon help ?

    Thanks

    18. Januar 2021 at 17:25 #50621

    Hi Epiphane,

    I suspect, because you are using pulseaudio, that you have an older Max2Play image. Please download one of our current Stretch or Buster and burn it to the SD card. Then please try the Bluetooth connection again. If you still have problems, please check whether your power supply is stable and if the Bluetooth signal is too weak.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here