- This topic has 8 replies, 3 voices, and was last updated 7 years ago by
.
-
Yes, all devices have the same issue, more or less. With my LG3 I get the best experience. After installimg from scratch it was the first device connected via bluetooth. Sometimes the connection lasts for 15-20 minutes without interrupts, but sometimes not. Echo dot does sometimes not even play right away. I have to disconnect and reconnect twice to get it work, but still, after a few minutes playing it stops. With fire tablet its the same. Distance is no issue, because m2p and devices are not more than 5m away, no walls etc.With all devices, the actual bluetooth connection is not lost, just the streaming does not produce any output to the speakers via HifiBerry AMp+ . Is there a way I can debug this?
I could try disabling inernal wifi as you mentioned, but getting the description right, it only moves binding of adapter from wlan0 to wlan1. Dont see any improvements in doing so.
[img]http://up.picr.de/28039022vn.jpg[/img]
Just disabled internal wifi, then restartet raspberry. Outcome was, tha squeezelite won’t start. Reversed and now it at least plays again.
Jan 16 19:18:30 max2play mtp-probe: checking bus 1, device 3: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1“
Jan 16 19:18:30 max2play mtp-probe: checking bus 1, device 8: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3“
Jan 16 19:18:30 max2play mtp-probe: bus: 1, device: 8 was not an MTP device
Jan 16 19:18:30 max2play mtp-probe: bus: 1, device: 3 was not an MTP device
Jan 16 19:19:11 max2play pulseaudio[1227]: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method „GetProperties“ with signature „“ on interface „org.bluez.Manager“ doesn’t exist
Jan 16 19:19:12 max2play pulseaudio[1227]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
Jan 16 19:19:12 max2play pulseaudio[1227]: [pulseaudio] module.c: Failed to load module „module-cli-protocol-unix“ (argument: „“): initialization failed.
Jan 16 19:19:18 max2play org.gtk.Private.AfcVolumeMonitor[1199]: Volume monitor alive
Jan 16 19:21:30 max2play pulseaudio[1227]: [bluetooth] module-bluez5-device.c: SBC decoding error (-2)
Jan 16 19:25:15 max2play mtp-probe: checking bus 1, device 8: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3“
Jan 16 19:25:15 max2play mtp-probe: bus: 1, device: 8 was not an MTP device
Jan 16 19:25:15 max2play mtp-probe: checking bus 1, device 3: „/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1“
Jan 16 19:25:15 max2play mtp-probe: bus: 1, device: 3 was not an MTP device
Jan 16 19:25:26 max2play pulseaudio[971]: [autospawn] core-util.c: Failed to create secure directory (/run/user/1000/pulse): Datei oder Verzeichnis nicht gefunden
Jan 16 19:25:26 max2play pulseaudio[971]: [autospawn] lock-autospawn.c: Fehler beim Zugriff auf Autostart-Sperre.
Jan 16 19:25:26 max2play pulseaudio[971]: [pulseaudio] main.c: Failed to acquire autospawn lock
Jan 16 19:25:49 max2play pulseaudio[1263]: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method „GetProperties“ with signature „“ on interface „org.bluez.Manager“ doesn’t exist
Jan 16 19:26:02 max2play org.gtk.Private.AfcVolumeMonitor[1238]: Volume monitor alive
Jan 16 19:29:05 max2play pulseaudio[1263]: [bluetooth] module-bluez5-device.c: SBC decoding error (-2)Jan 16 19:25:19 max2play kernel: [ 11.611004] Bluetooth: HCI device and connection manager initialized
Jan 16 19:25:19 max2play kernel: [ 11.611030] Bluetooth: HCI socket layer initialized
Jan 16 19:25:19 max2play kernel: [ 11.611049] Bluetooth: L2CAP socket layer initialized
Jan 16 19:25:19 max2play kernel: [ 11.611087] Bluetooth: SCO socket layer initialized
Jan 16 19:25:19 max2play kernel: [ 11.618574] Bluetooth: HCI UART driver ver 2.3
Jan 16 19:25:19 max2play kernel: [ 11.618600] Bluetooth: HCI UART protocol H4 registered
Jan 16 19:25:19 max2play kernel: [ 11.618610] Bluetooth: HCI UART protocol Three-wire (H5) registered
Jan 16 19:25:19 max2play kernel: [ 11.618824] Bluetooth: HCI UART protocol BCM registered
Jan 16 19:25:19 max2play kernel: [ 11.880380] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jan 16 19:25:19 max2play kernel: [ 11.880400] Bluetooth: BNEP filters: protocol multicast
Jan 16 19:25:19 max2play kernel: [ 11.880423] Bluetooth: BNEP socket layer initialized
Jan 16 19:25:23 max2play kernel: [ 15.858998] FS-Cache: Netfs ‚cifs‘ registered for caching
Jan 16 19:25:23 max2play kernel: [ 15.859829] Key type cifs.spnego registered
Jan 16 19:25:23 max2play kernel: [ 15.859892] Key type cifs.idmap registered
Jan 16 19:25:26 max2play kernel: [ 18.668019] Adding 102396k swap on /var/swap. Priority:-1 extents:7 across:307200k SSFS
Jan 16 19:25:51 max2play kernel: [ 35.418229] Bluetooth: hci0 command 0x0c24 tx timeout
Jan 16 19:25:53 max2play kernel: [ 37.418258] Bluetooth: hci0 command 0x0c52 tx timeout
Jan 16 19:26:24 max2play kernel: [ 68.098617] input: 68:54:FD:88:4F:8A as /devices/virtual/input/input0
Jan 16 19:29:05 max2play kernel: [ 229.175693] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.175762] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.175851] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.175933] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.176019] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.176107] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.176194] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.176282] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.176369] Bluetooth: hci0: Frame reassembly failed (-84)
Jan 16 19:29:05 max2play kernel: [ 229.176466] Bluetooth: hci0: Frame reassembly failed (-84)
You must be logged in to reply to this topic.