[SOLVED] Audioplayer Edit Advanced Options

Max2Play Home Forums Max2Play on Raspberry PI [SOLVED] Audioplayer Edit Advanced Options

Viewing 5 posts - 1 through 5 (of 5 total)
  • 15. Januar 2019 at 2:03 #43640

    I have the Hifiberry AMP2. I am getting the following message.

    Important: The chosen soundcard is located at hw:0 but the settings for squeezelite and shairport in the advanced options in the audioplayer tab are not pointing to hw:0 ! You need to change this to get your audio card working correctly!

    I am unsure exactly which option to choose in the Advanced Options?

    • This topic was modified 5 years, 10 months ago by Weka_1.
    • This topic was modified 5 years, 10 months ago by Weka_1.
    • This topic was modified 5 years, 10 months ago by Weka_1.
    • This topic was modified 5 years, 10 months ago by Weka_1.
    • This topic was modified 5 years, 10 months ago by Weka_1.
    15. Januar 2019 at 14:02 #43659

    Edit „hw:1“ in command line options of Squeezelite to „hw:0“

    15. Januar 2019 at 23:49 #43700

    [SOLVED] Brilliant work Heiner. I lost all function. Now its working. But what should I choose in the:

    Soundcard Select Audio Output Drop down box?

    https://flic.kr/p/S5A3zq

    • This reply was modified 5 years, 10 months ago by Weka_1.
    17. Januar 2019 at 13:23 #43799

    You lost all function? You can select one of the hifiberry settings, it should automatically set to sysdefault hifiberry once you selected the AMP2.

    17. Januar 2019 at 13:29 #43803

    Thanks for that. I was always using the drop down box instead of editing the command line. My new samsung evo card has made a very big difference. The whole unit is running much better and the Apache2 non starting problem has been fixed 100 percent. Amazing. Cant wait to try running Kodi again to see if its much faster.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Register here