- This topic has 5 replies, 2 voices, and was last updated 6 years, 10 months ago by
.
-
After I updated M2P I have no sound on Odroid C1+ and U3.
I use Diyhink USB to I2S.
It has worked on both Odroid platforms U3 and C1+.
When I select,the build in audio of U3, i get sound over the headphone but wen I select one of the USB DAC,s there is no sound.
I reinstalled the SD image several times,no luck.
I checked my USB dac with Dietpi and Volumio, They work with no problem.
After use of M2P for many years,pleace help.
Hw USB2.0 High speed true HD Audio without any conversion Card Audio -1 DEV=0
But for testing it again ,i first have to reinstall because i installed dietpi on the Odroid C1+ of my first streamer.
I have 2 streamers,one is stil working with M2P on an Odroid U3,i havent updated that one yet.
I wil replace the streamer with the C1+ for a U3 with a fresh installed M2P and test it again
After a few days of reading on the internet (I dont know any thing about linux)
And after several reinstals, I found out the problems.
1: I have 2 routers on one network switch,disconnected one router,and the problem of player not found was gone.
2: The main problem after update or reinstall was ,,NO SOUND,,
After a lot of reading i installed PUTTY,to SSH M2P.
Gave the command ,,alsamixer,, then F6 to sellect USB audio.
I had to UNMUTE the USB audio with the ,,m,, on the keybord!!!
I HAVE SOUND ,
To be sure,I reinstaled M2P on other SSD carts,all work after UNMUTING in SSH.
You must be logged in to reply to this topic.