The Squeelite player is no longer detected since version 8.4 of LMS

Hello,
I used for a long time to play Squeelite on 2 Raspberry with Max2play (1 with hifiberry DAC, 1 with a Bluetooth connection to headset) ; I have also 2 Squeezebox radio.

Since LMS version 8.4.0 and 8.4.1, the Squeelite player is no longer detected by LMS. I still have my SB radio devices working properly.

Thanks for your help.
Best regards.

HIFIBerry on Max2Play
Hifi Berry DAC2 HD (B+ / PI 2/3/4)

Squeezelite
#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpihifiberry -a 80:4::
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d default:CARD=sndrpihifiberry
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
jack – JACK Audio Connection Kit
pulse – PulseAudio Sound Server
equal
plugequal – Equalizer for plughw:0,0
default:CARD=Headphones – bcm2835 Headphones, bcm2835 Headphones – Default Audio Device
sysdefault:CARD=Headphones – bcm2835 Headphones, bcm2835 Headphones – Default Audio Device
dmix:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Direct sample mixing device
dsnoop:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Direct sample snooping device
hw:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Direct hardware device without any conversions
plughw:CARD=Headphones,DEV=0 – bcm2835 Headphones, bcm2835 Headphones – Hardware device with all software conversions
usbstream:CARD=Headphones – bcm2835 Headphones – USB Stream Output
default:CARD=sndrpihifiberry – snd_rpi_hifiberry_dacplushd, HiFiBerry DAC+ HD HiFi pcm179x-hifi-0 – Default Audio Device
sysdefault:CARD=sndrpihifiberry – snd_rpi_hifiberry_dacplushd, HiFiBerry DAC+ HD HiFi pcm179x-hifi-0 – Default Audio Device
dmix:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplushd, HiFiBerry DAC+ HD HiFi pcm179x-hifi-0 – Direct sample mixing device
dsnoop:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplushd, HiFiBerry DAC+ HD HiFi pcm179x-hifi-0 – Direct sample snooping device
hw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplushd, HiFiBerry DAC+ HD HiFi pcm179x-hifi-0 – Direct hardware device without any conversions
plughw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dacplushd, HiFiBerry DAC+ HD HiFi pcm179x-hifi-0 – Hardware device with all software conversions
usbstream:CARD=sndrpihifiberry – snd_rpi_hifiberry_dacplushd – USB Stream Output

#### SHAIRPORT (SYNC) VERSION ####
3.3.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

#### OUTPUT SOUND DETAILS CARD 0 ####
closed

#### OUTPUT SOUND DETAILS CARD 1 ####
access: MMAP_INTERLEAVED
format: S32_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 882
buffer_size: 3528

Settings Max2Play
#### FILESYSTEM ####
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 6164352 3084608 2798440 53% /
devtmpfs 3809292 0 3809292 0% /dev
tmpfs 3941388 0 3941388 0% /dev/shm
tmpfs 3941388 9612 3931776 1% /run
tmpfs 5120 4 5116 1% /run/lock
tmpfs 3941388 0 3941388 0% /sys/fs/cgroup
/dev/mmcblk0p1 258096 55054 203042 22% /boot

#### LOAD AVERAGE ####
0.00 0.03 0.06 1/150 7085

#### KERNEL ####
Linux ShineOnYouCrazyDiamond 5.4.79-v7l+ #1373 SMP Mon Nov 23 13:27:40 GMT 2020 armv7l GNU/Linux

#### LINUX-VERSION ####
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 10 (buster)
Release: 10
Codename: buster

Paramètres du Raspberry – détecté Raspberry PI 4B 8GB
#### BOOT CONFIG TXT ####
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default „safe“ mode
#hdmi_safe=1

# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force a console size. By default it will be display’s size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
dtoverlay=vc4-fkms-v3d
max_framebuffers=2

[all]
#dtoverlay=vc4-fkms-v3d
gpu_mem=256
dtoverlay=hifiberry-dacplushd
disable_overscan=1
Squeezebox Server
(Not started)
#### SQUEEZESERVER LOG ####

#### PERL VERSION ####
v5.28.1

#### SQUEEZEBOXSERVER PERL VERSION FOUND ####

Configuration WiFi & Réseau
inet 192.168.1.139 netmask 255.255.255.0 broadcast 192.168.1.255
ether dc:a6:32:cf:12:41 txqueuelen 1000 (Ethernet)
RX packets 3894 bytes 328433 (320.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 954 bytes 307276 (300.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 91 bytes 4529 (4.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 91 bytes 4529 (4.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

### WLAN ###
Jivelite Squeezebox
Not started