Max2Play on STRETCH + FHEM + 97_SB_SERVER problem

Hi MarioM,

1) Yes i have to copy the two filse from opt/fhem/contrib to opt/fhem/FHEM so that they are loaded. Otherwise i can’t use the commands DEFINE SB_SERVER in FHEM (https://wiki.fhem.de/wiki/Squeezebox_Modul).

2) Yes, FHEM work before copying the files.

hi,

I received my RPI 4B and i installed the new M2P 1.53.
After that i did all RPI update.

it seem that 97_SB_SERVER.pm work with M2P 1.53 and FHEM 6.0.23320 with the file here :
https://github.com/ChrisD70/FHEM-Modules/blob/master/autoupdate/sb/FHEM/97_SB_SERVER.pm
This file is uptaded from 2019-04-15 while the file installed with FHEM is older.

however

when i reboot M2P FHEM didn’t work anymore (service is lauch but the web interface don’t load).
To fix this
-i had to click on „kill“ FHEM process. The process failed to stop but FHEM work again.
-I had to comment this 2 lines in fhem.
`#define initialUsbCheck notify global:INITIALIZED usb create
#setuuid initialUsbCheck xxx`

Now it’s work well for me.

If somebody need this, i use fhem to activate a relay and a amplifier power supply if one of my squeezeboxplayer (multi usb DAC with multisqueeze plugin) play music:

define squeezebox_Server SB_SERVER 192.168.1.xxx

define SB_PLAYER_b825ebc171f0 SB_PLAYER b8:25:eb:c1:71:f0

(auto detected by 98_SB_PLAYER.pm when SB_SERVER is define with the previous line)

define etat_playstatus dummy 

(a variable for save the state if one player is running)

define GPIO17 RPI_GPIO 17
attr GPIO17 direction output
define GPIO17 RPI_GPIO 18
attr GPIO18 direction output

define SB_PLAYER_playStatus notify SB_PLAYER_b823ebc171f0:.*|SB_PLAYER_b824ebc171f0:.*|SB_PLAYER_b825ebc171f0:.*|SB_PLAYER_b826ebc171f0:.*|SB_PLAYER_b827ebc171f0:.*|SB_PLAYER_b828ebc171f0:.*|SB_PLAYER_b829ebc171f0:.* {\
if (\
ReadingsVal ("SB_PLAYER_b823ebc171f0", "playStatus", "") eq "playing" ||\
ReadingsVal ("SB_PLAYER_b824ebc171f0", "playStatus", "") eq "playing" ||\
ReadingsVal ("SB_PLAYER_b825ebc171f0", "playStatus", "") eq "playing" ||\
ReadingsVal ("SB_PLAYER_b826ebc171f0", "playStatus", "") eq "playing" ||\
ReadingsVal ("SB_PLAYER_b827ebc171f0", "playStatus", "") eq "playing" ||\
ReadingsVal ("SB_PLAYER_b828ebc171f0", "playStatus", "") eq "playing" ||\
ReadingsVal ("SB_PLAYER_b829ebc171f0", "playStatus", "") eq "playing"\
)\
{\
	fhem ("set etat_playstatus on");;\
 }\
else\
{\
       fhem ("set etat_playstatus off");;\
 }\
}

(catch notification from squeezebox player and look the state of „playStatus“. If one of them is „playing“ etat_playstatus is set to „on“)

define ETAT_AMPLIFICATEUR DOIF ([etat_playstatus] eq "on")\
(set GPIO17 off)\
(set GPIO18 off)\
DOELSE\
(set GPIO17 on)\
(set GPIO18 on)
attr ETAT_AMPLIFICATEUR wait 0,0:30,0

(look for „etat_playstatus“ state. If „etat_playstatus“ is on then GPIO turn off and switch on the amplifier power supply (reverse logic pin). If „etat_playstatus“ is off then GPIO turn on and switch off the power supply after 30s).

It’s work very well!

• This reply was modified 3 years, 11 months ago by remyb.
• This reply was modified 3 years, 11 months ago by remyb.
• This reply was modified 3 years, 11 months ago by remyb.
• This reply was modified 3 years, 11 months ago by remyb.