24bit/192khz Playback issues

This topic has 20 replies, 3 voices, and was last updated 5 years, 10 months ago by air_ii premium.

Viewing 21 posts - 1 through 21 (of 21 total)

Back to forum

Posted in: General Questions on Hardware and Max2Play Versions
rvanscherpe

23. August 2018 at 14:25 #37209

Hi there.

I have a Raspberry Pi 3 running the Max2play distribution. Attached to the Pi is a Justboom Digi Hat. From the Digihat I have an optical cable going to a Definitive Sound W9 speaker. I can play native 16bit/44.1khz FLAC but for some reason I cannot play 24bit/192khz. If I connect the setup to a W7 speaker it works but the W9 doesn’t. I only seem to be able to play 24bit/192khz if I use their app and Play-Fi. I checked with Justboom and they said its a software issue and check out the forums here. Can you please help?

Thank you.

Ron

Heiner premium

23. August 2018 at 15:05 #37211

Hi Ron,

Please share the command line options of your Squeezelite player as well as the debug info.

rvanscherpe

23. August 2018 at 15:37 #37214

The command line options I am using are: 80:4::

Here is the debug info:

#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpijustboomd -a 80:4::
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d sysdefault:CARD=sndrpijustboomd
USE_USB_DAC=0
USE_EQUALIZER=1
SYSTEM_USER=pi
YMPD_PARAMETER=–webport 8081

#### SQUEEZELITE -l ####

#### SHAIRPORT (SYNC) VERSION ####
3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

#### OUTPUT SOUND DETAILS CARD 0 ####
closed

#### OUTPUT SOUND DETAILS CARD 1 ####
closed

Thank you

Heiner premium

24. August 2018 at 9:18 #37255

Hi Ron,

Please try deactivating the build in audio, rebooting, selecting none in the JustBoom menu, rebooting and again selecting the JB Amp HAT and reboot. Afterwards, please check your playback again.

rvanscherpe

24. August 2018 at 14:57 #37263

I’ve actually done a complete re-install and still the same thing.
Again it doesn’t happen with the W7 speakers of which I have 2 of.
I’ve updated the firmware on the speakers themselves to the latest
as well.

Heiner premium

24. August 2018 at 15:10 #37266

If you are using the Equalizer, please deactivate it to rule it out as a possible source of error.

Also, please remove the-a 80:4:: parameter from your command line options.

rvanscherpe

24. August 2018 at 15:11 #37267

I wasn’t using the EQ.
Heiner premium

24. August 2018 at 15:19 #37268

Okay, I was referring to your output from the debug info: USE_EQUALIZER=1

edit: also, the tips in this topic might help you along.
- This reply was modified 6 years, 3 months ago by Heiner.
rvanscherpe

24. August 2018 at 15:46 #37270

I didn’t re-enable that when I re-installed.

rvanscherpe

24. August 2018 at 15:58 #37272

Current debug from fresh install with justboom card installed:

#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpijustboomd -a 80:4::
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d sysdefault:CARD=sndrpijustboomd
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
YMPD_PARAMETER=–webport 8081

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
equal
plugequal – Equalizer for plughw:0,0
default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
dmix:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample mixing device
dmix:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample mixing device
dsnoop:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample snooping device
dsnoop:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample snooping device
hw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct hardware device without any conversions
hw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct hardware device without any conversions
plughw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Hardware device with all software conversions
plughw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Hardware device with all software conversions
default:CARD=sndrpijustboomd – snd_rpi_justboom_digi, – Default Audio Device
sysdefault:CARD=sndrpijustboomd – snd_rpi_justboom_digi, – Default Audio Device
iec958:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Direct sample mixing device
dsnoop:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Direct sample snooping device
hw:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Direct hardware device without any conversions
plughw:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Hardware device with all software conversions

#### SHAIRPORT (SYNC) VERSION ####
3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

#### OUTPUT SOUND DETAILS CARD 0 ####
closed

#### OUTPUT SOUND DETAILS CARD 1 ####
access: MMAP_INTERLEAVED
format: S24_LE
subformat: STD
channels: 2
rate: 88200 (88200/1)
period_size: 1764
buffer_size: 7056

rvanscherpe

25. August 2018 at 2:12 #37275

Hi there.

I contacted Definitive Sound and they suggested that I may have a bad optical input so I returned it and got a new W9 and still have the same issue where it doesn’t play 24bit/192khz. My W7’s do. Definitive Sound confirmed that they can accept 24bit/192khz through the optical input.

Ron.

rvanscherpe

25. August 2018 at 2:54 #37276

I’m also having issues with playing back 24bit/96khz and 24bit/88.2khz. I can
make it work if I transcode it. I turned off native for FLAC and turned on
MP3. This is not ideal. Again the W7’s do this without transcoding.

Thank you.

Heiner premium

27. August 2018 at 10:37 #37540

Hi Ron,

Have you tried the tips from the linked topic yet?

rvanscherpe

27. August 2018 at 13:48 #37579

linked topic? I’m not sure what you mean. I’ve exchanged the speaker for a new one. I’ve done a complete re-install of Max2play. All with the same results. The W7’s dont have this issue.

Heiner premium

27. August 2018 at 14:49 #37586

From a previous post:also, the tips in this topic might help you along.

rvanscherpe

27. August 2018 at 15:07 #37587

How do you disable the built-in audio?

rvanscherpe

27. August 2018 at 15:44 #37588

I did: „deactivating the build in audio, rebooting, selecting none in the JustBoom menu, rebooting and again selecting the JB Amp HAT and reboot“

but now the squeezelite player isn’t starting. I have the Digi Hat and not the Amp Hat.

#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpijustboomd -a 80:4:: -o hw:CARD=sndrpijustboomd -V Digital
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d sysdefault:CARD=sndrpijustboomd -t hardware -m hw:CARD=sndrpijustboomd -c Digital
USE_USB_DAC=0
USE_EQUALIZER=1
SYSTEM_USER=pi
YMPD_PARAMETER=–webport 8081

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
equal
plugequal – Equalizer for plughw:0,0

#### SHAIRPORT (SYNC) VERSION ####
3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

Heiner premium

27. August 2018 at 15:55 #37589

Sorry I meant the Digi, mixed up with another topic.

Your EQ seems to be active again?

rvanscherpe

27. August 2018 at 16:03 #37590

I disabled it. Also, when it attempts to play I get a loud static snap and then nothing.

#### SQUEEZELITE VERSION ####
Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.

#### SQUEEZELITE BUILDOPTIONS ####
Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

#### AUDIOPLAYER CONFIG ####
### Configuration of Audioplayers
SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpijustboomd -a 80:4::
SQUEEZESLAVE_PARAMETER=-n plugequal
SHAIRPORT_PARAMETER=-d sysdefault:CARD=sndrpijustboomd
USE_USB_DAC=0
USE_EQUALIZER=0
SYSTEM_USER=pi
YMPD_PARAMETER=–webport 8081

#### SQUEEZELITE -l ####
Output devices:
null – Discard all samples (playback) or generate zero samples (capture)
equal
plugequal – Equalizer for plughw:0,0
default:CARD=sndrpijustboomd – snd_rpi_justboom_digi, – Default Audio Device
sysdefault:CARD=sndrpijustboomd – snd_rpi_justboom_digi, – Default Audio Device
iec958:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Direct sample mixing device
dsnoop:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Direct sample snooping device
hw:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Direct hardware device without any conversions
plughw:CARD=sndrpijustboomd,DEV=0 – snd_rpi_justboom_digi, – Hardware device with all software conversions

#### SHAIRPORT (SYNC) VERSION ####
3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

#### OUTPUT SOUND DETAILS CARD 0 ####
access: MMAP_INTERLEAVED
format: S24_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)
period_size: 882
buffer_size: 3528

#### OUTPUT SOUND DETAILS CARD 1 ####

If I transcode it to mp3 it works. Again this doesn’t happen with the w7s

Heiner premium

27. August 2018 at 17:10 #37592

You could still add „hw:0 -C 5“ to the command line options to get rid of the snap.

What have you tried from the topic thus far?

air_ii premium

8. Januar 2019 at 13:28 #43259

I thought I’d post here, as I faced an identical issue and in my case the reason was fiber connection. Since I switched to RCA, everything has worked like a charm. It appears the optical link’s bandwidth is too limited (or my cable was poor quality) / other factors are at play.

Viewing 21 posts - 1 through 21 (of 21 total)

You must be logged in to reply to this topic.